Washroom Accessories

• Frame, waste receptacle and cabinet fabricated of 22 gauge stainless steel alloy 18-8, type 304
• Waste receptacle has hemmed edges for safety
• Internal hooks for hanging a reusable vinyl bag
• Optional reusable vinyl bag model 58-PY for 12 gal unit
• Tumbler lock retains waste receptacle
• Container locks into cabinet and is removable for servicing
• Available in multiple projection, recess, mounting and capacity configurations
• Type 304 Stainless Steel - Satin Finish

Series
0458 Series

Type
Traditional™ Waste Receptacle

Overall Dimensions
17-1/4″ x 30-1/2″ x 8″ (438 x 775 x 203 mm)

Wall Opening
15-3/4″ x 29″ x (variable*) (400 x 737 mm)

Standard Model Capacity
12 gal (46 liters)

Construction
22 gauge stainless steel alloy 18-8, Type 304

Finish
Satin Finish

Mounting
Semi-Recessed or Surface Mounted, depending on selected configuration

• Satin Finish

Waste receptacle is emptied manually on cycle determined by maintenance requirements.

Optional reusable liner bags may be purchased to hang on internal hooks or disposable bags may be draped over rim and held in place when receptacle is locked into cabinet.

Keyed tumbler lock prevents unauthorized removal.

Container locks into cabinet and is removable for servicing.

Mount unit in wall recess using #10 self-threading screws through concealed mounting holes provided.

Top of Rough Wall Opening (RWO) is 3/4″ (19 mm) below top of unit.

Wall opening for the standard configuration is 15-3/4″ x 29″ with depth varying according to the selected configuration.

Select the appropriate model according to the required projection, recess depth, mounting method and waste capacity.

• Product Care & Maintenance
• Technical Data Sheet – 0458 Series

• Satin finish stainless steel construction
• Type 304 stainless steel
• Robust 16 gauge stainless steel face
• Curved radius edges
• Surface mounted
• 48 fl. oz. (1.4 L) capacity
• All-purpose valve dispenses liquid, lotion and detergent-type soaps
• Tamper-resistant refill window with concealed fastening
• Vandal-resistant hinged filler-top
• 3/16″ concealed piano hinge adds durability

Model
9343

Series
Profile™

Type
Liquid Soap Dispenser – Surface Mounted

Dimensions
7-1/4” x 6-1/2” x 3-11/16” (184 x 165 x 94 mm)

Spout Projection
15/16” (24 mm)

Capacity
48 fl. oz. (1.4 L)

Construction
Type 304 Stainless Steel

Mounting
Surface Mounted

Dispensing
Manual push-button operation

Soap Requirements
Proper usage of this dispenser requires, that only soap within the following range for viscosity and pH may be used.

Viscosity Range (mPa·s or cP)
100 – 2.5k

pH Range
5.5 ~ 8.0

Consumable Type
Liquid Soap

• Satin Finish

Soap is manually dispensed by depressing the push button. Unit is refilled through the hinged door at the top requiring the special key supplied to open.

Soap tank will continue to feed properly until empty. Tank supply is replenished manually according to maintenance needs.

Under normal usage, stainless steel products require regular cleaning with a soft clean rag moistened with a mild detergent, followed by a water-moistened clean rag and then a dry rag.

Soap dispenser valves in low-traffic areas should be wiped regularly to remove air-hardened soap residue from the nozzle spout.

If the dispenser fails to operate because of dried soap or debris, the dispenser may be removed from the wall plate and flushed with hot water as described in the ASI installation and maintenance instructions.

Unit is surface mounted to wall or partition by means of a wall mounting plate and screws. Unit is secured to the mounting plate and locked in place by means of a locking screw installed through the tamper-resistant refill door.

Recommended mounting height for general utility is 42″ (1067 mm) Above Finished Floor (AFF) or 6″ (152 mm) minimum above the wash basin to bottom of unit.

Allow 4″ (102 mm) minimum clearance above the unit for filling.

Mount wall plate vertically with the wide part of the “V” at the top. Use suitable mounting hardware for the wall construction.

Unlock the filler door using the special service key furnished, position the dispenser on the wall plate, press the tank down firmly, and tighten the internal locking screw securely.

For maximum usability and ADA accessibility, the valve may be installed at a maximum of 54″ (1372 mm) AFF for clear-floor side reach, 48″ (1219 mm) AFF for clear-floor forward reach, or 46″ (1168 mm) AFF where side reach over an obstruction is provided.

• Product Care & Maintenance
• Soap & Hand Sanitizer Dispensing Chart
• Installation & Maintenance Instructions – 9343
• Technical Data Sheet – 9343

• Horizontal baby changing station
• Recessed mounting
• Type 304 stainless steel door facing and collar
• Available in Satin Finish or Matte Black Powder Coated finish
• Unit complies with 2010 ADA Accessibility Standards
• Intended use for infants up to 3.5 years old and up to 50 lbs (23kg)
• Bed is designed to cradle a child’s body
• Adjustable two-part vinyl-coated safety strap with Sure-Lock latch
• Integral bag hook
• Bed-liner dispenser convertible to a multi-fold towel dispenser
• Damped gas spring aids one-handed operation using less than 5 lbs force (22.2N)

Series
9018 Series

Models
9018 / 9018-41

Type
Baby Changing Station, HORIZONTAL – STAINLESS STEEL, Recessed

Closed Dimensions
39-5⁄32″ x 28-1/4″ x 3⁄8″ (995 x 718 x 10 mm)

Open Dimensions
39-5/32” x 28-1/4” x 18-1/8” (995 x 718 x 460 mm)

Wall Opening
35-1/2″ x 24-1/2″ x 4″ min (902 x 622 x 102 mm)

Construction
Type 304 Stainless Steel

Mounting
Recessed

9018 Finish
Satin Finish

9018-41 Finish
Matte Black Powder Coated

Intended Use
Infants up to 3.5 years old and up to 50 lbs (23kg)

Static Load Testing
Tested during development to sustain 250 lbs (113 kg) static load with minimal deflection.

• 9018 – Type 304 Stainless Steel - Satin Finish
• 9018-41 – Type 304 Stainless Steel - Matte Black Powder Coated

• Complies with 2010 ADA Accessibility Standards
• ASTM F-2285 & F-2388 compliant
• G-21 and G-22 compliant
• ANSI Z535 compliant
• ANSI 117.1 compliant
• EN 12221-1 and EN 12221-2 compliant
• Adjustable two-part vinyl-coated safety strap with Sure-Lock latch
• Operable using less than 5 lbs force (22.2N)

Unit platform is shaped to keep a child restrained from rolling out of the bed. Unit is easily opened and closed by user with one hand in any location and handle cavity is provided on door face for preferred use.

Unit is operable with less than 5 Lbf (22.2N) while not requiring any tight grasping, pinching or twisting of the wrist.

Bed liner/towel dispenser presents liners or towels for user hygiene and convenience. Dispenser lid is provided for sanitary protection and ease of loading of wipes or liners.

Safety strap is easily adjustable by user for baby size and Sure-Lock latch securely resists opening until released by opposing finger pressure by adult caretaker/parent.

Liners/towels are easily replenished by service personnel as required.

Unit is recess mounted using hardware supplied through concealed mounting holes. The supplied hardware kit contains fasteners suitable for metal or wood stud walls in dry locations and general hollow wall construction where adequate substrate strength is obtained.

Fasteners and anchors for masonry walls are not provided. Wall reinforcement must be suitable to sustain transfer of maximum unit loading.

Mounting hole plug covers are supplied to conceal fasteners after installation.

Provide Rough Wall Opening (RWO) of required depth from face of finished wall. Mount unit in properly framed RWO using four (4) #10 x 1-1/2″ [M5 x 38] self-threading pan head screws through side holes.

Alternate rear-hole mounting may be used where wall depth and framing reinforcement permits, using suitable fasteners appropriate for wall conditions.

Rough Wall Opening (RWO) required is 35-1/2″ W x 24-1/2″ H x 4″ D minimum [902 x 622 x 102].

• Product Care & Maintenance
• Installation, Maintenance & Operation Owner's Manual – 9018 Series
• Technical Data Sheet – 9018 – Satin Finish
• Technical Data Sheet – 9018-41 – Matte Black

• Heavy Duty - Round Shaped Rod - 1″ diameter
• Type 304 Stainless Steel - Satin Finish
• Heavy duty solid cast brass plated support posts
• Designed not to turn in support posts
• Surface Mounted

• 0755-SS-18 – 18″ Length (457 mm)
• 0755-SS-24 – 24″ Length (610 mm)

Model / Series
0755-SS

Type
Towel Bar (Heavy-Duty) – Surface Mounted, Stainless Steel

Dimensions
Available in 18″ and 24″ (457 and 610 mm) lengths.

Overall Dimensions
(variable length”) x 2-5/8″ x 2-1/2″ (variable x 67 x 64 mm)

Towel Bar
1″ (25 mm) O.D. x 20 gauge, type 304 stainless steel

Support Posts
Heavy solid cast brass plated to have stainless steel satin finish to match stainless steel

Mounting
Surface Mounted

• Satin Finish

Stainless steel washroom accessory products require regular surface cleaning. Clean with a soft clean rag moistened with a mild detergent, followed by a water-moistened clean rag and then a dry rag.

Stainless steel should be protected against muriatic acid, caustic or abrasive materials, and harsh cleaning detergents.

Surface mount each support post to wall with three (3) 1/4″ diameter [Ø6] oval, pan or round head fasteners of length and type to suit wall conditions (supplied by installer) through mounting holes in posts.

To mount on stud walls, provide concealed backing at screw points, secured to studs. Backing must comply with local building codes. If concealed backing is not provided, secure with toggle bolts.

To mount on solid walls, use plastic or fiber type plugs or expansion bolts.

For compliance with 2010 ADA Accessibility Standards, install unit so that centerline of bar is 48″ [1219] Above Finished Floor (AFF) if clear floor forward reach access is provided or 46″ [1168] AFF if side reach over obstruction is only provided.

• Product Care & Maintenance
• Technical Data Sheet – 0755-SS

• Self-closing door mounted to cabinet with stainless steel spring hinge
• Recessed for side wall installation
• 1.5 gal (5.7 liters) dry solids capacity
• Waste container held in place by “Z” clip retainer
• Safety-edged finger grip provides convenient grip for service
• Door, flanges, waste receptacle and cabinet are 22 gauge type 304 stainless steel alloy 18-8
• Type 304 Stainless Steel - Satin Finish
• Recessed

Model
0473

Type
Sanitary Napkin Disposal – Recessed

Overall Dimensions
13″ x 17-1/4″ x 4-1/4″ (330 x 438 x 108 mm)

Wall Opening
11-1/4″ x 15-3/4″ x 4″ (285 x 400 x 102 mm)

Construction
Type 304 Stainless Steel - Satin Finish

Material Gauge
22 Gauge

Mounting
Recessed

Capacity
1.5 gal (5.7 liters) of dry solids

• Satin Finish

Users push door to deposit waste material. Door is self-closing.

Unit is emptied by removing can and removing disposable waxed waste paper bag which is furnished by others.

Waste container is held in place by a “Z” clip retainer to prevent inadvertent dumping of contents.

Unit is mounted in wall recess using #10 self-threading screws (by others) through concealed mounting holes provided.

Top of rough wall opening is 3/4″ [19] below top of unit.

Rough wall opening required is 11-1/4″ x 15-3/4″ x 4″ minimum.

• Product Care & Maintenance
• Technical Data Sheet – 0473

• Automatic touchless operation
• Dispenses liquid soap or gel hand sanitizer
• Seamless drawn construction
• 22 gauge type 304 stainless steel
• Satin Finish
• Translucent removable tank for easy-to-view content level
• LED indicates function and operational condition
• Powered by 6 AA-size batteries (not included)
• Surface or stand mounted
• 33.8 oz. (1000 ml) capacity

Model
20364

Series
Roval™

Type
Automatic Liquid Soap and Gel Hand Sanitizer Dispenser

Dimensions
5-1/2″ x 10-7/8″ x 4″ (140 x 276 x 102 mm)

Construction
22 gauge Type 304 Stainless Steel

Capacity
33.8 oz. (1000 ml) of liquid soaps and gel hand sanitizer

Power
6 AA-size batteries (not included)

Operation
Automatic – Battery Operated – Touchless

Mounting
Surface or Stand Mounted

Sensor Detection Range
3-1/8″ [80 mm] ± 3/8″ [10 mm]

Dispense Volume
Approximately 0.03 oz. [0.8 ml] per activation

Soap Requirements
Proper usage of this dispenser requires, that only soap/lotion/gel hand sanitizer within the following range for viscosity and pH may be used.

Liquid Soap Viscosity Range (mPa·s or cP)
50 – 3.5k

Gel Hand Sanitizer Viscosity Range (mPa·s or cP)
3.5k – 23k

pH Range
5.5 ~ 8.5

• Satin Finish

Unit operates when an object is positioned within the sensing distance below the dispenser. A measured amount of product is pumped from the nozzle for each activation while battery charge is adequate and appropriate viscosity soap or sanitizer is present in the tank.

Locking door provides security and vandal resistance after soap refill and battery replacement.

Use clean product from a closed container when refilling the reservoir. Clean the soap reservoir of residue on a monthly basis before refilling with fresh product.

Clean the exterior housing regularly with a soft cleaning cloth. Do not soak or submerge the unit and do not clean under running water.

The sensor lens may be cleaned with a soft clean cloth lightly dampened with a suitable general-purpose surface cleaner. Avoid abrasive materials that may scratch the sensor lens.

Replace the batteries at intervals appropriate for the level of use and facility maintenance schedule.

Secure concealed base plate to wall using four suitable self-threading screws through the mounting holes provided and appropriate wall anchors or another suitable mounting system.

For compliance with 2010 ADA Accessibility Standards, install unit so that bottom of unit is 48″ [1219 mm] maximum Above Finished Floor (AFF).

Minimum distance to counter top is 12″ [305 mm].

Install six (6) AA-size 1.5V batteries according to the polarity indication in the concealed battery compartment. Fill tank with appropriate viscosity soap or sanitizer to the correct level and lock the door.

For wall installation, ensure the mounting surface is smooth, flat, vertical and clean, with sufficient clearance above the unit for servicing and lock access.

• Product Care & Maintenance
• Soap & Hand Sanitizer Dispensing Chart
• Owner's Manual – 20364
• Mounting Template – 20364
• Technical Data Sheet – 20364

• L Shaped – Left Hand – 33″ (838 mm) Wide – ADA
• Seat folds up when not in use
• Requires only one hand operation to manually lower to horizontal position for use or raise for departure and arrival
• White solid phenolic seat with black core
• Frame, support legs, flanges, and bracket are type 304 satin finish stainless steel
• Phenolic seat ONLY is field reversible
• Seat is slotted for drainage
• Surface Mounted
• Supports loads up to 500 lbs maximum if installed properly

Model
8206-L

Type
Folding Shower Seat – L Shaped – Left Hand

Seat
½” (13 mm) thick, one piece solid, white colored, black core phenolic

Width
33″ (838 mm)

Projection
22-7⁄8″ (581 mm) from wall

Fold Down Dimensions
33″ x 17″ x 22-7/8″ (838 x 432 x 581 mm)

Fold Up Dimensions
33″ x 35-3/8″ x 22-7/8″ (457 x 899 x 581 mm)

Frame Construction
Type 304 Stainless Steel – Satin Finish

Mounting
Surface Mounted

Compliance
ADA

Supports loads up to 500 lbs maximum if installed properly.

• Seat: White Phenolic with Black Core
• Frame / Body: Type 304 Stainless Steel – Satin Finish

Fold-up Shower Seat requires only one hand operation to manually lower to horizontal position for use or raise for departure and arrival.

Guide bracket with spring detent prevents seat from dropping and provides positive support in usage position as well as spring locked storage position.

This unit is surface mounted. Installer/contractor must provide concealed anchor plate or blocking as specified in construction documents or as required by local building codes prior to wall finishing.

Fasten unit flanges and guide bracket to concealed anchor or blocking plate with appropriate hardware.

Concealed mounting plates or anchors and hardware are not supplied with this product and must be specified separately.

Ensure that mounting configuration complies with local building codes.

• Product Care & Maintenance
• Technical Data Sheet – 8206-L

• Horizontal baby changing station
• 100% high-density polyethylene construction
• Surface Mounted
• Low profile – only 4″ (102 mm) deep when closed
• Designed to support an infant up to 3.5 years old and up to 50 lbs (23 kg)
• Bed is shaped to cradle a child’s body
• Easy one-handed operation
• Adjustable two-part safety strap with Sure-Lock latch
• Two integral bag hooks
• Bed-liner dispenser convertible to a multi-fold towel dispenser
• Damped gas spring aids one-handed operation

Model
9012

Type
Baby Changing Station, HORIZONTAL – PLASTIC

Closed Dimensions
36” x 22” x 4” (914 x 559 x 102 mm)

Open Dimensions
36” x 22” x 20-7/16” (914 x 559 x 519 mm)

Construction
High-Density Polyethylene (HDPE)

Mounting
Surface Mounted

Intended Use
Infants up to 3.5 years old and up to 50 lbs (23 kg)

• ADA compliant
• ASTM F-2285 & F-2388 compliant
• ANSI Z535 compliant
• ANSI 117.1 compliant
• Adjustable safety strap with Sure-Lock latch
• Operable with less than 5 lbs force (22.2N)
• No tight grasping, pinching or twisting of the wrist is required for operation

Unit platform is shaped to cradle a child’s body. Unit is easily opened and closed by user with one hand anywhere on top or front edge of bed or using bag hooks/hand grips on sides.

Bed liner/towel dispenser presents liners or towels for user hygiene and convenience. Dispenser lip retains stack for single liner/towel dispensing.

Safety strap is easily adjustable by user for baby size and Sure-Lock latch securely resists opening until released by opposing finger pressure by adult caretaker.

Ensure that the liner compartment is adequately stocked. Thoroughly clean the unit daily with warm water and mild anti-bacterial detergent, rinse with clean water and dry. Do not use abrasive cleaning agents.

Periodically inspect the unit to ensure that it remains securely attached to the wall and that the unit and wall mounting have not been affected by vandalism or abnormal wear.

Surface mount unit using hardware supplied through recessed mounting holes provided. Hardware kit supplied has fasteners suitable for metal or wood stud walls in dry locations and general hollow wall construction where adequate substrate strength is obtained.

Fasteners and anchors for masonry walls are not provided. Wall reinforcement must be suitable to sustain transfer of maximum unit loading.

Locate wall studs at 16″ (406 mm) O.C. for fastening the station. If two wall studs cannot be used, use two screws into one stud and install suitable toggle fasteners securely at the non-stud location.

Attach unit to wall studs with four 1/4″ x 3″ long Philips pan head self-threading screws with flat washers. Where wall studs are not available, attach with four 1/4″-20 x 3″ toggle bolts with flat washers into toggles or expansion nuts.

Installation should be performed by a qualified technician, and the wall and attachment method must be strong enough to support the rated load.

• Product Care & Maintenance
• Installation & Maintenance Instructions – 9012
• Technical Data Sheet – 9012

• Curved front adds strength and elegance
• Cabinet front is formed seamless
• 22 gauge type 304 stainless steel alloy 18-8
• Concealed, multi-staked piano hinge
• Removable waste can
• Full top edge is hemmed with return to inside for user and service safety
• Type 304 Stainless Steel - Satin Finish
• Surface Mounted
• 1 gal. (3.8 L) capacity

Model
20852

Series
Roval™

Type
Surface Mounted Sanitary Waste Receptacle

Dimensions
7-1/4″ x 10″ x 3-1/2″ (185 x 253 x 89 mm)

Construction
22 gauge type 304 stainless steel alloy 18-8

Capacity
1 gal. (3.8 L)

Mounting
Surface Mounted

• Satin Finish

User lifts lid to deposit waste material. Maintenance schedule determines trash removal cycle. Unload unit by either removing the disposable wax paper liner bag (by others) or unhooking the unit from the mounting screws and inverting to empty into appropriate bulk collection container.

For general utility mount the receptacle 28″ [711] to 40″ [1016] above finished floor (AFF) from top of unit.

For compliance with 2010 ADA Accessibility Standards install unit so that top cover is no higher than 48″ [1219] above finished floor.

Hang unit on wall with two (2) pre-installed #10 x 1-1/4″ [32] self-threading pan head screws (by others) through the mounting keyhole slots provided into suitable wall reinforcements (by others) or two (2) pre-installed #10 x 3/4″ [19] self-threading pan head screws (by others) through the mounting keyhole slots provided into metal partition.

Surface mounting collars conveniently adapt standard recessed mounting cabinets for use on walls with insufficient depth for recessing or wall materials that would make cutouts impossible.

• Product Care & Maintenance
• Surface Mounting Collar Installation
• Technical Data Sheet – 20852