Door Trim & Accessories
Commercial Door Keyed Removable Mullions, Push Plates, Pull Handles, Pull Bars, Push Bars, Pull Handles, Kickplates, Corner Guards, Latch Guards, Door Stops, Door Holds, Manual Flushbolts, and Door Viewers from PDQ. Our products meet the requirements of the Buy American Act.
Cal-Royal 7700 Panic Device Accessories - RIGID LEVER ESCUTCHEON
$150.00
CONSTRUCTION
• Rigid, non-clutch mechanism
• Double heavy duty spring support to prevent
sagging and enhance operation
• Grade 1, thru-bolted design. Non-handed design.
Easily field reversible
• Hardened steel heavy duty tailpiece. Available
for fire and non-fire rated rim and vertical rod exit
devices
• Standard 6-Pin Schlage “C” Mortise Cylinder
included
DOOR THICKNESS
Standard 1 ¾”. For 2 ¼” thick door use additional
Part # TAIL3
ESCUTCHEON DIMENSIONS
2 ¾” width X 10 ¼” length. Lever length: 4 ¾”.
Fits and covers 2 ⅛” 161 cutout
Installation Challenge Level
Challenging
Recommended for Experienced Installers, but not rocket science.
Cal-Royal A7700 Accessories -Outside Trim CLUTCH CYLINDRICAL LEVER
$121.00
COMPATIBLE WITH: Cal-Royal 7700 Series Exit Device, Cal-Royal 5000 Series Exit Device
Non-Handed Grade 1 (Clutch Style)
Cylindrical body hardened steel heavy duty tailpiece. For 1 ¾” and 2 ¼” doors.
Prefix “THI” before Part # for 2 ¼” door thickness.
Available for fire and non-fire rated rim and vertical rod exit devices.
Rose diameter 3 ½”, lever length 4 ¾”. Fits and covers 161 cutout.
Finishes: US32D, US26D
INCLUDES GRADE 304SS LEVER AND ROSE
Installation Challenge Level
Challenging
Recommended for Experienced Installers, but not rocket science.
Cal-Royal Mechanical Easy Code Change Trim only
$267.00
Cal-Royal Mechanical Easy Code Change EXIT DEVICE TRIM ONLY for Rim and Surface Vertical Rods
Outside Trim for CAL-ROYAL 2200, 6600, 7700 and 9800 Series Rim and Surface Vertical Rods
Operated by lever from outside and when push pad is depressed, except outside has to enter a pre-programmed code on the keypad in order to retract the latch upon turning the lever. For use with 2200, 6600, 7700 and 9800 Series Rim and Surface Vertical Rods.
Default Function: Storeroom
Optional Function: Passage Mode
Finish: Satin Chrome (US26D)
Door Thickness: 1 3⁄4” - 2”
Catalogue page-crcode200-series
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
PDQ Keyed Removable Mullion-83" Non Fire Rated
$468.00
The PDQ/AE 9300 series keyed removable mullions are for use with our 4200 and 6300 series Rim Exit Devices on non fire or fire rated pairs of doors. They are designed for quick removal from the top bracket by a simple operation of the rim cylinder when a clear, unobstructed large opening is required. Once the mullion is removed, carts, gurneys, large machinery and the like can freely pass through the opening. When the mullion is re-installed, the unit will self lock in place without the need for the key. Each keyed removable mullion set includes top and bottom bracket set, mullion tube, and shims. Includes rim cylinder.
Specs
- TUBE DIMENSIONS: 2” W x 3” D / 1/8” wall thickness / 11 Gauge steel tube
- SIZE: 8’ and 10’ sizes available in Fire and Non-Fire Rated styles
- COLOR: Gray Baked Powder Coating
- CERTIFICATION: UL Rated by UL 10B / UL10S standard
- WARRANTY: One (1) year limited warranty
- CALL for Fire Rated availability and 10' availability
Finishes
Gray Powder Coating
Installation Challenge Level
Challenging
Recommended for Experienced Installers
Instructions & Templates
PDQ Angled Wall Stop
$24.00
The PDQ 115 Angled Wall Stop is cast from solid brass and features a strong rubber bumper. This Angled Wall Stop is available in a Satin Chrome Finish.
Features
- Sloped design reduces damage due to abuse
Specs
- MATERIAL: Solid cast brass with rubber bumper
- COMPLIANCES: ANSI/BHMA A156.16, TYPE L02051
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
PDQ Door Holder with Stop
$32.00
The PDQ Door Holder with Stop is mounted either vertically to the floor or horizontally to baseboard or wall. This Door Holder stops help prevent damage to walls when opening a door. Stops and Holders are mounted overhead and also protect the abuse of the hardware such as closers and hinges from wear and tear.
Specs
- MATERIAL: Cast brass
- COMPLIANCES: ANSI/BHMA A156.16, TYPE L01291
Finish
Satin chrome plated 702-US26D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
PDQ Door Stop-Spring Base
$5.00
This broad base Spring Door Stop is designed to install on a wall, door or baseboard to prevent wall or door damage. The large rubber tip of PDQ 112 Spring Base door Stops helps soften contact with wall or door to prevent damage. The flexible construction allows stop to flex when vacuuming and then snap back to original shape. Broad base provides a wider surface to support spring.
Minimum Order Quantity: 20 pieces.
Specs
- MATERIAL: Spring steel
- COMPLIANCES: ANSI/BHMA A156.16, TYPE L02051
Finishes
Satin Nickel Plated 619/US515
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
PDQ Door Viewer
$7.00
This PDQ Door Viewer allows a user to identify visitors from the security of a locked door. Viewer adjusts to fit doors from 1-3/8" To 2" thick. Offers 160 Degrees Lens Angle for Wide Viewing. Includes 4 Precision Ground Glass Lenses, Carded. It is constructed from solid brass and comes plated in satin nickel.
Minimum Order Quantity: 5 pieces.
Features
- Privacy cover, 160 degrees viewing area
Specs
- MATERIAL: Brass
- COMPLIANCES, LISTINGS: Complies with ANSI/BHMA A156.16, TYPE 03222. UL/CUL Listed for use with Certified Swinging-Type Fire Doors rated up to and including 1-1/2 hrs
Finishes
Polished Chrome Plated 625/US26
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
PDQ Hinge Stop
$5.00
The PDQ 245 Hinge Stops helps prevent damage to walls when opening a door. The rubber bumper tip of hinge stops for doors protects the door from getting damaged. Spring design allows flexibility with door and is easy to install.
Minimum Order Quantity: 10 pieces.
Features
- Positive slip proof adjustment
- Heavy wrought steel construction works with both 1⁄4” and 5⁄16” hinge pins
Specs
- MATERIAL: Wrought steel with rubber bumpers
- COMPLIANCES: ANSI/BHMA A156.16, TYPE L02223
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
PDQ Kick Down
$8.50
The PDQ Kick-Down Door Stop flips down easily to hold a door open. This Door Stop does not interfere with door operation while in raised position and is easy to install.
Minimum Order Quantity: 5 pieces.
Features
- Bumper provides reliable grip on floor
Specs
- MATERIAL: Cast steel
- COMPLIANCES: ANSI/BHMA A156.16, TYPE L01382
Finishes
Aluminum Painted 689/SP28
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
PDQ Kick Plate
$85.00
Provides protection for the bottom of the door from scuffing due to foot traffic or cleaning maintenance. Recommended for all doors especially when using a door closer.
Specs
- MATERIAL: Stainless Steel, Brass, Aluminum
- THICKNESS: 0.050"
- MOUNTING FASTENERS: • #6 x 5/8 OH PH SMS
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
PDQ Manual Flushbolt for Metal Door
$14.50
Flush bolts are used to secure an inactive door on a pair of double doors. PDQ 93170 series flush bolts are manual flush bolts for hollow metal doors. We have brass flush bolts, and steel flush bolts. PDQ 93170 flush bolts for hollow metal doors. Also please note that we also carry door coordinators if needed. We carry different types of flush bolt hardware for various installations.
Features
- Compatible with ANSI/BHMA 156.115 door and frame prep
- 3/4" slide bolt throw, 3⁄4" backset.
- 12" rod length (center of face to bolt end - retracted).
- 1-1⁄ 2" adjustable slide bolt.
- PDQ # 909 Dust Proof Strike recommended to prevent dirt from accumulating and clogging the bottom strike (ordered separately)
Specs
- BASE MATERIAL: Brass and steel
- FASTENERS: 16 ea. #8 x 3⁄4" FH combo screws
- FACE PLATE: 1" x 6-3⁄4"
- STRIKE: 15⁄16" x 2-1/4"
- GUIDE: 1" x 2"
- CERTIFICATIONS, LISTINGS, COMPLIANCES: Meets requirements of Buy American Act
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging
Recommended for Experienced Installers
Instructions & Templates
PDQ Offset Pull Handle
$66.12
The PDQ 9E Series Offset Pull Handle is neat and stylish in appearance. This pull Handle is suited to many different door applications in commercial and residential environments.
Specs
- SIZE: 10"
- PROJECTION: .3-1/4"
- OVERALL LENGTH: 11"
- CLEARANCE: 2-1/4"
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
INSTRUCTIONS & TEMPLATES
PDQ Offset Pull Handle & Push Bar Set
$292.56
The Offset Pull Handle and Push Bar are neat and stylish in appearance. Both are suited to many different door applications in commercial and residential environments.
The set includes the Offset Pull Handle and Push Bar.
Specs
- Offset Pull Handle 1" round 10" CTC
- Push Bar 1" round 33" CTC
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
INSTRUCTIONS & TEMPLATES
PDQ Pull Handle
$30.10
The PDQ 3 Series Round Straight Pull Door handle features an arched D shape, 2 mounting holes, 9" overall length. This compact sized, light weight, Round Straight Door Pull handle is suitable for office buildings, department stores, and supermarkets.
Specs
- SIZE: 8"
- PROJECTION: 3"
- OVERALL LENGTH: 9"
- CLEARANCE: 2"
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
INSTRUCTIONS & TEMPLATES
PDQ Push Plate
$25.00
Door push plates protect the wood of a door which closes automatically, usually on swinging doors or doors with a pull handle on one side. These PDQ 96 Series are faithfully recreated from classic designs and available in a variety of finishes to match your home's decor.
Minimum Order Quantity: 5 pieces.
Specs
- Mounting Fasteners: #6 x 5/8 OH PH SMS
- Material: Brass, Stainless Steel
- Size: 4"x16" / Thickness: 0.050"
- Standard Cutout for Cylinder: 1-1/4” DIA
- Standard Cutout for Thumbturn: 3/8" DIA
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
PDQ Universal Dome Stop
$5.68
This floor mounted Dome Door Stop helps keep doors from hitting walls. A fashionable yet functional addition to a room's decor.This PDQ Dome Stops eliminates the need to determine requirement for traditional low or high dome stop - one stop for all applications.
Minimum Order Quantity: 5 pieces.
Features
- For doors with thresholds or undercut doors
Specs
- MATERIAL: Solid cast brass with bumper
- COMPLIANCES: ANSI/BHMA A156.16, TYPES L02141 (for plastic anchor), L20161 (for lead anchor)
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
PDQ Wall Stop-Concave Bumper
$4.00
The PDQ 102 Concave wall stop is ideal for residential and commercial applications. Protects walls from damage that can occur from door locks.
Minimum Order Quantity: 10 pieces.
Features
- Concealed Mounting
- Concave Bumper
- Backplate prevents damage to wall
Specs
- MATERIAL: Wrought brass, bronze, and stainless steel with bumper
- COMPLIANCES: ANSI/BHMA A156.16, TYPE L02251
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
PDQ Wall Stop-Convex Bumper
$4.00
The PDQ Convex wall stop bumper is ideal for residential and commercial applications. Protects walls from damage that can occur from door locks.
Minimum Order Quantity: 10 pieces.
Features
- Concealed Mounting
- Convex Bumper
- Backplate prevents damage to wall
Specs
- MATERIAL: Wrought brass, bronze, and stainless steel with bumper
- COMPLIANCES: ANSI/BHMA A156.16, TYPE L02251
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
Company Info
Resources
Why Buy From Us?
Huge Inventory
Huge Inventory
No Hassle Returns
Satisfaction
Guaranteed
Guaranteed
News & Updates
Sign up to get the latest on sales, new releases and more …
