ASI - 9343 Profile™ Liquid Soap Dispenser – Surface Mounted

• Frame, waste receptacle and cabinet fabricated of 22 gauge stainless steel alloy 18-8, type 304
• Waste receptacle has hemmed edges for safety
• Internal hooks for hanging a reusable vinyl bag
• Optional reusable vinyl bag model 58-PY for 12 gal unit
• Tumbler lock retains waste receptacle
• Container locks into cabinet and is removable for servicing
• Available in multiple projection, recess, mounting and capacity configurations
• Type 304 Stainless Steel - Satin Finish

Series
0458 Series

Type
Traditional™ Waste Receptacle

Overall Dimensions
17-1/4″ x 30-1/2″ x 8″ (438 x 775 x 203 mm)

Wall Opening
15-3/4″ x 29″ x (variable*) (400 x 737 mm)

Standard Model Capacity
12 gal (46 liters)

Construction
22 gauge stainless steel alloy 18-8, Type 304

Finish
Satin Finish

Mounting
Semi-Recessed or Surface Mounted, depending on selected configuration

• Satin Finish

Waste receptacle is emptied manually on cycle determined by maintenance requirements.

Optional reusable liner bags may be purchased to hang on internal hooks or disposable bags may be draped over rim and held in place when receptacle is locked into cabinet.

Keyed tumbler lock prevents unauthorized removal.

Container locks into cabinet and is removable for servicing.

Mount unit in wall recess using #10 self-threading screws through concealed mounting holes provided.

Top of Rough Wall Opening (RWO) is 3/4″ (19 mm) below top of unit.

Wall opening for the standard configuration is 15-3/4″ x 29″ with depth varying according to the selected configuration.

Select the appropriate model according to the required projection, recess depth, mounting method and waste capacity.

• Product Care & Maintenance
• Technical Data Sheet – 0458 Series

• Horizontal baby changing station
• Recessed mounting
• Type 304 stainless steel door facing and collar
• Available in Satin Finish or Matte Black Powder Coated finish
• Unit complies with 2010 ADA Accessibility Standards
• Intended use for infants up to 3.5 years old and up to 50 lbs (23kg)
• Bed is designed to cradle a child’s body
• Adjustable two-part vinyl-coated safety strap with Sure-Lock latch
• Integral bag hook
• Bed-liner dispenser convertible to a multi-fold towel dispenser
• Damped gas spring aids one-handed operation using less than 5 lbs force (22.2N)

Series
9018 Series

Models
9018 / 9018-41

Type
Baby Changing Station, HORIZONTAL – STAINLESS STEEL, Recessed

Closed Dimensions
39-5⁄32″ x 28-1/4″ x 3⁄8″ (995 x 718 x 10 mm)

Open Dimensions
39-5/32” x 28-1/4” x 18-1/8” (995 x 718 x 460 mm)

Wall Opening
35-1/2″ x 24-1/2″ x 4″ min (902 x 622 x 102 mm)

Construction
Type 304 Stainless Steel

Mounting
Recessed

9018 Finish
Satin Finish

9018-41 Finish
Matte Black Powder Coated

Intended Use
Infants up to 3.5 years old and up to 50 lbs (23kg)

Static Load Testing
Tested during development to sustain 250 lbs (113 kg) static load with minimal deflection.

• 9018 – Type 304 Stainless Steel - Satin Finish
• 9018-41 – Type 304 Stainless Steel - Matte Black Powder Coated

• Complies with 2010 ADA Accessibility Standards
• ASTM F-2285 & F-2388 compliant
• G-21 and G-22 compliant
• ANSI Z535 compliant
• ANSI 117.1 compliant
• EN 12221-1 and EN 12221-2 compliant
• Adjustable two-part vinyl-coated safety strap with Sure-Lock latch
• Operable using less than 5 lbs force (22.2N)

Unit platform is shaped to keep a child restrained from rolling out of the bed. Unit is easily opened and closed by user with one hand in any location and handle cavity is provided on door face for preferred use.

Unit is operable with less than 5 Lbf (22.2N) while not requiring any tight grasping, pinching or twisting of the wrist.

Bed liner/towel dispenser presents liners or towels for user hygiene and convenience. Dispenser lid is provided for sanitary protection and ease of loading of wipes or liners.

Safety strap is easily adjustable by user for baby size and Sure-Lock latch securely resists opening until released by opposing finger pressure by adult caretaker/parent.

Liners/towels are easily replenished by service personnel as required.

Unit is recess mounted using hardware supplied through concealed mounting holes. The supplied hardware kit contains fasteners suitable for metal or wood stud walls in dry locations and general hollow wall construction where adequate substrate strength is obtained.

Fasteners and anchors for masonry walls are not provided. Wall reinforcement must be suitable to sustain transfer of maximum unit loading.

Mounting hole plug covers are supplied to conceal fasteners after installation.

Provide Rough Wall Opening (RWO) of required depth from face of finished wall. Mount unit in properly framed RWO using four (4) #10 x 1-1/2″ [M5 x 38] self-threading pan head screws through side holes.

Alternate rear-hole mounting may be used where wall depth and framing reinforcement permits, using suitable fasteners appropriate for wall conditions.

Rough Wall Opening (RWO) required is 35-1/2″ W x 24-1/2″ H x 4″ D minimum [902 x 622 x 102].

• Product Care & Maintenance
• Installation, Maintenance & Operation Owner's Manual – 9018 Series
• Technical Data Sheet – 9018 – Satin Finish
• Technical Data Sheet – 9018-41 – Matte Black

• Heavy Duty - Round Shaped Rod - 1″ diameter
• Type 304 Stainless Steel - Satin Finish
• Heavy duty solid cast brass plated support posts
• Designed not to turn in support posts
• Surface Mounted

• 0755-SS-18 – 18″ Length (457 mm)
• 0755-SS-24 – 24″ Length (610 mm)

Model / Series
0755-SS

Type
Towel Bar (Heavy-Duty) – Surface Mounted, Stainless Steel

Dimensions
Available in 18″ and 24″ (457 and 610 mm) lengths.

Overall Dimensions
(variable length”) x 2-5/8″ x 2-1/2″ (variable x 67 x 64 mm)

Towel Bar
1″ (25 mm) O.D. x 20 gauge, type 304 stainless steel

Support Posts
Heavy solid cast brass plated to have stainless steel satin finish to match stainless steel

Mounting
Surface Mounted

• Satin Finish

Stainless steel washroom accessory products require regular surface cleaning. Clean with a soft clean rag moistened with a mild detergent, followed by a water-moistened clean rag and then a dry rag.

Stainless steel should be protected against muriatic acid, caustic or abrasive materials, and harsh cleaning detergents.

Surface mount each support post to wall with three (3) 1/4″ diameter [Ø6] oval, pan or round head fasteners of length and type to suit wall conditions (supplied by installer) through mounting holes in posts.

To mount on stud walls, provide concealed backing at screw points, secured to studs. Backing must comply with local building codes. If concealed backing is not provided, secure with toggle bolts.

To mount on solid walls, use plastic or fiber type plugs or expansion bolts.

For compliance with 2010 ADA Accessibility Standards, install unit so that centerline of bar is 48″ [1219] Above Finished Floor (AFF) if clear floor forward reach access is provided or 46″ [1168] AFF if side reach over obstruction is only provided.

• Product Care & Maintenance
• Technical Data Sheet – 0755-SS

• Self-closing door mounted to cabinet with stainless steel spring hinge
• Recessed for side wall installation
• 1.5 gal (5.7 liters) dry solids capacity
• Waste container held in place by “Z” clip retainer
• Safety-edged finger grip provides convenient grip for service
• Door, flanges, waste receptacle and cabinet are 22 gauge type 304 stainless steel alloy 18-8
• Type 304 Stainless Steel - Satin Finish
• Recessed

Model
0473

Type
Sanitary Napkin Disposal – Recessed

Overall Dimensions
13″ x 17-1/4″ x 4-1/4″ (330 x 438 x 108 mm)

Wall Opening
11-1/4″ x 15-3/4″ x 4″ (285 x 400 x 102 mm)

Construction
Type 304 Stainless Steel - Satin Finish

Material Gauge
22 Gauge

Mounting
Recessed

Capacity
1.5 gal (5.7 liters) of dry solids

• Satin Finish

Users push door to deposit waste material. Door is self-closing.

Unit is emptied by removing can and removing disposable waxed waste paper bag which is furnished by others.

Waste container is held in place by a “Z” clip retainer to prevent inadvertent dumping of contents.

Unit is mounted in wall recess using #10 self-threading screws (by others) through concealed mounting holes provided.

Top of rough wall opening is 3/4″ [19] below top of unit.

Rough wall opening required is 11-1/4″ x 15-3/4″ x 4″ minimum.

• Product Care & Maintenance
• Technical Data Sheet – 0473