ASI - 0760-Z Towel Bar (Square) – Surface Mounted, Chrome Plated Zamak

• Heavy Duty - Round Shaped Rod - 1″ diameter
• Type 304 Stainless Steel - Satin Finish
• Heavy duty solid cast brass plated support posts
• Designed not to turn in support posts
• Surface Mounted

• 0755-SS-18 – 18″ Length (457 mm)
• 0755-SS-24 – 24″ Length (610 mm)

Model / Series
0755-SS

Type
Towel Bar (Heavy-Duty) – Surface Mounted, Stainless Steel

Dimensions
Available in 18″ and 24″ (457 and 610 mm) lengths.

Overall Dimensions
(variable length”) x 2-5/8″ x 2-1/2″ (variable x 67 x 64 mm)

Towel Bar
1″ (25 mm) O.D. x 20 gauge, type 304 stainless steel

Support Posts
Heavy solid cast brass plated to have stainless steel satin finish to match stainless steel

Mounting
Surface Mounted

• Satin Finish

Stainless steel washroom accessory products require regular surface cleaning. Clean with a soft clean rag moistened with a mild detergent, followed by a water-moistened clean rag and then a dry rag.

Stainless steel should be protected against muriatic acid, caustic or abrasive materials, and harsh cleaning detergents.

Surface mount each support post to wall with three (3) 1/4″ diameter [Ø6] oval, pan or round head fasteners of length and type to suit wall conditions (supplied by installer) through mounting holes in posts.

To mount on stud walls, provide concealed backing at screw points, secured to studs. Backing must comply with local building codes. If concealed backing is not provided, secure with toggle bolts.

To mount on solid walls, use plastic or fiber type plugs or expansion bolts.

For compliance with 2010 ADA Accessibility Standards, install unit so that centerline of bar is 48″ [1219] Above Finished Floor (AFF) if clear floor forward reach access is provided or 46″ [1168] AFF if side reach over obstruction is only provided.

• Product Care & Maintenance
• Technical Data Sheet – 0755-SS

• L Shaped – Left Hand – 33″ (838 mm) Wide – ADA
• Seat folds up when not in use
• Requires only one hand operation to manually lower to horizontal position for use or raise for departure and arrival
• White solid phenolic seat with black core
• Frame, support legs, flanges, and bracket are type 304 satin finish stainless steel
• Phenolic seat ONLY is field reversible
• Seat is slotted for drainage
• Surface Mounted
• Supports loads up to 500 lbs maximum if installed properly

Model
8206-L

Type
Folding Shower Seat – L Shaped – Left Hand

Seat
½” (13 mm) thick, one piece solid, white colored, black core phenolic

Width
33″ (838 mm)

Projection
22-7⁄8″ (581 mm) from wall

Fold Down Dimensions
33″ x 17″ x 22-7/8″ (838 x 432 x 581 mm)

Fold Up Dimensions
33″ x 35-3/8″ x 22-7/8″ (457 x 899 x 581 mm)

Frame Construction
Type 304 Stainless Steel – Satin Finish

Mounting
Surface Mounted

Compliance
ADA

Supports loads up to 500 lbs maximum if installed properly.

• Seat: White Phenolic with Black Core
• Frame / Body: Type 304 Stainless Steel – Satin Finish

Fold-up Shower Seat requires only one hand operation to manually lower to horizontal position for use or raise for departure and arrival.

Guide bracket with spring detent prevents seat from dropping and provides positive support in usage position as well as spring locked storage position.

This unit is surface mounted. Installer/contractor must provide concealed anchor plate or blocking as specified in construction documents or as required by local building codes prior to wall finishing.

Fasten unit flanges and guide bracket to concealed anchor or blocking plate with appropriate hardware.

Concealed mounting plates or anchors and hardware are not supplied with this product and must be specified separately.

Ensure that mounting configuration complies with local building codes.

• Product Care & Maintenance
• Technical Data Sheet – 8206-L

• 1″ diameter (Ø25) bar
• 20 gauge tubing
• Type 304 Stainless Steel - Satin Finish
• Length will be as specified
• Wall Mounted
• Rod is held captive by flanges (#1214-1, sold separately) when installed properly
• Curtain hooks Model 1200-SHU may be used with the rod

• 24″ (610 mm)
• 30″ (762 mm)
• 36″ (914 mm)
• 42″ (1067 mm)
• 48″ (1219 mm)
• 54″ (1372 mm)
• 60″ (1524 mm)
• 66″ (1676 mm)
• 72″ (1829 mm)

Maximum rod length is 120″ (3048 mm). Rods longer than 72″ (1829 mm) require ceiling hanger Model #1224-C18.

Model
1214-2

Type
Shower Curtain Rod – 1″ dia. Bar, Stainless Steel

Diameter
1″ (Ø25)

Tubing
20 gauge

Construction
Type 304 Stainless Steel

Maximum Length
120″ (3048 mm)

Mounting
Wall Mounted

Flanges
#1214-1, sold separately

• Satin Finish

Rod is held captive by flanges (#1214-1, sold separately) when installed properly. Rod may rotate in flanges if turned by hand.

Correctly installed rod and flanges will support specified shower curtain(s) hung on hooks 1200-SHU or others.

Rod will bend and pull from flanges if significant body weight is suspended.

Install rod in straight section between two (2) mounting flanges with no more than 1/4″ [6] total wall clearance.

Rods longer than 72″ [1829] require ceiling hanger Model #1224-C18.

For use with standard shower curtain Model #1200 or #1200-V having 72″ [1829] length and standard hooks (Model #1200-SHU), install unit with rod centerline 74-1/2″ [1892] maximum above finished floor (MAX AFF) or 67″ [1702] above tub rim to obtain 6″ [152] bottom overlap.

Seal screw holes in walls under flange to prevent any sprayed water from possibly infiltrating the wall structure.

• Product Care & Maintenance
• Technical Data Sheet – 1214-2

• Anti-bacterial, 10 gauge white vinyl fabric
• Standard height of 72″ (1829 mm)
• Multiple widths available
• White Vinyl
• Aluminum or Stainless Steel Grommets
• Self-Extinguishing and NFPA 701 compliant
• Curtain hooks Model № 1200-SHU are recommended

• 1200-V36 – 36″ (762 mm) wide, 6 hooks recommended
• 1200-V42 – 42″ (1067 mm) wide, 7 hooks recommended
• 1200-V48 – 48″ (1219 mm) wide, 8 hooks recommended
• 1200-V60 – 60″ (1524 mm) wide, 10 hooks recommended
• 1200-V72 – 72″ (1829 mm) wide, 12 hooks recommended
• 1200-V84 – 84″ (2134 mm) wide, 14 hooks recommended

Model
1200-V Series

Type
Shower Curtain – 10 ga. White Vinyl, Various Widths

Height
72″ (1829 mm) standard height

Material
10 gauge white vinyl fabric

Grommets
Aluminum or Stainless Steel

Compliance
Self-Extinguishing and NFPA 701 compliant

Curtain should be 6″ (152 mm) wider than opening up to 42″ (1067 mm) and 12″ (305 mm) wider than opening exceeding 42″ (1067 mm).

• 30″ opening – 36″ curtain
• 36″ opening – 42″ curtain
• 42″ opening – 48″ curtain
• 48″ opening – 60″ curtain
• 60″ opening – 72″ curtain
• 72″ opening – 84″ curtain

For openings up to 42″ (1067 mm) wide curtains should be specified an additional 6″ (152 mm) wider than opening and 12″ (305 mm) wider for openings exceeding 42″ (1067 mm).

Shower curtain should be attached with hooks (not provided, order separately) to rod (not provided, order separately). Curtain hooks Model № 1200-SHU are recommended.

• Product Care & Maintenance
• Technical Data Sheet – 1200-V