Locks
Standard and Heavy Duty Commercial Door Cylindrical and Mortise Locksets, Deadbolts, and Keyless Door Locks from PDQ, Alarm Lock, and Simplex. Our products meet the requirements of the Buy American Act.
PDQ Cylindrical Lock - SD126 Passage
$70.00
PDQ SD series grade 2 lever set for commercial doors features unique through bolt installation for added security and durability and is UL listed A label for single swing doors.
The SD126 is a Passage function lock, where the latch bolt is operated by the lever from either side at all times. There is no locking function.
- Non keyed
- Latch bolt operated by lever from either side at all times
We also offer the SD Series Cylindrical Lock in several other functions - Entrance/Office, Privacy, and Storeroom. Compare Functions.
Features
- Listed by UL 10C / UBC 7-2 (1997) positive pressure, for single doors up to 4’0” x 8’0”.
- Certified to ANSI/BHMA A156.2–1996, Series 4000, Grade 2.
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
Specs
- FOR DOORS: 1-3/8" to 1-3/4" thick.
- DOOR PREP: Fits standard 161 door prep (2 1/8" hole x 2 3/4" backset). Through-door through-bolting. Through-bolts removable if desired.
- BACKSET: 2-3/4" is standard.
- FRONT: 2-1/4" x 1-1/8" for 2-3/4" backset. Stainless steel or wrought brass.
- STRIKE: 4-7/8" x 1-1/4" (ASA).
- LATCHBOLT: 1/2" throw. Adjustable front for flat or beveled doors.
- HAND: Non-handed.
- TRIM: Zinc diecast levers/wrought brass rose.
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging
Recommended for Experienced or Professional Installers.
PDQ Cylindrical Lock - SD176 Privacy
$80.00
PDQ SD series grade 2 lever set for commercial doors features unique through bolt installation for added security and durability and is UL listed A label for single swing doors.
The SD176 is a Privacy function lock which features push-button locking. The lock can be opened from the outside with an emergency release. The inside push button can be released by turning the inside lever.
- Non keyed
- Latch bolt operated by lever from either side or emergency release in outside lever
- Outside lever locked by push button on inside
- Outside lever unlocked by emergency release from outside, rotating inside lever, or closing door
We also offer the SD Series Cylindrical Lock in several other functions - Entrance/Office, Storeroom and Passage. Compare Functions.
Features
- Listed by UL 10C / UBC 7-2 (1997) positive pressure, for single doors up to 4’0” x 8’0”.
- Certified to ANSI/BHMA A156.2–1996, Series 4000, Grade 2.
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
- Cylinder(s) included
Specs
- FOR DOORS: 1-3/8" to 1-3/4" thick.
- DOOR PREP: Fits standard 161 door prep (2 1/8" hole x 2 3/4" backset). Through-door through-bolting. Through-bolts removable if desired.
- BACKSET: 2-3/4" is standard.
- FRONT: 2-1/4" x 1-1/8" for 2-3/4" backset. Stainless steel or wrought brass.
- STRIKE: 4-7/8" x 1-1/4" (ASA).
- LATCHBOLT: 1/2" throw. Adjustable front for flat or beveled doors.
- HAND: Non-handed.
- TRIM: Zinc diecast levers/wrought brass rose.
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging
Recommended for Experienced or Professional Installers.
PDQ Cylindrical Lock - SD115 Storeroom
$85.00
PDQ SD series grade 2 lever set for commercial doors features unique through bolt installation for added security and durability and is UL listed A label for single swing doors.
The SD115 is a Storeroom function lock, where the latch bolt is operated by a key outside and the lever from the inside. The outside lever is rigid.
- Latch bolt operated from outside by key, inside by lever
- Outside lever always fixed
- Inside lever always free
- Deadlocking (guarded) latch bolt all times
We also offer the SD Series Cylindrical Lock in several other functions - Entrance/Office, Privacy, and Passage. Compare Functions.
Features
- Listed by UL 10C / UBC 7-2 (1997) positive pressure, for single doors up to 4’0” x 8’0”.
- Certified to ANSI/BHMA A156.2–1996, Series 4000, Grade 2.
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
- Cylinder(s) included
Specs
- FOR DOORS: 1-3/8" to 1-3/4" thick.
- DOOR PREP: Fits standard 161 door prep (2 1/8" hole x 2 3/4" backset). Through-door through-bolting. Through-bolts removable if desired.
- BACKSET: 2-3/4" is standard.
- FRONT: 2-1/4" x 1-1/8" for 2-3/4" backset. Stainless steel or wrought brass.
- STRIKE: 4-7/8" x 1-1/4" (ASA).
- LATCHBOLT: 1/2" throw. Adjustable front for flat or beveled doors.
- HAND: Non-handed.
- TRIM: Zinc diecast levers/wrought brass rose.
- KEYS: Two change keys per lock.
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging
Recommended for Experienced or Professional Installers.
PDQ Cylindrical Lock - SD116 Entrance/Office
$85.00
PDQ SD series grade 2 lever set for commercial doors features unique through bolt installation for added security and durability and is UL listed A label for single swing doors.
The SD116 is an Entrance/Office function lock, where the door is unlocked by a key from the outside when the outer lever is locked by a turn-button on the inside lever. The inside lever is always unlocked.
- Latch bolt operated by lever from either side or key in outside lever
- Outside lever locked by push/turn button on inside
- When outside lever is locked by push button on inside – key from outside,
or rotating inside lever unlocks outside lever - When outside lever is locked by pushing and turning the button on the inside,
key from outside or rotating inside lever retracts latch but does not unlock outside lever - Deadlocking (guarded) latch bolt
We also offer the SD Series Cylindrical Lock in several other functions - Privacy, Storeroom,and Passage. Compare Functions.
Features
- Listed by UL 10C / UBC 7-2 (1997) positive pressure, for single doors up to 4’0” x 8’0”.
- Certified to ANSI/BHMA A156.2–1996, Series 4000, Grade 2.
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
- Cylinder included
Specs
- FOR DOORS: 1-3/8" to 1-3/4" thick.
- DOOR PREP: Fits standard 161 door prep (2 1/8" hole x 2 3/4" backset). Through-door through-bolting. Through-bolts removable if desired.
- BACKSET: 2-3/4" is standard.
- FRONT: 2-1/4" x 1-1/8" for 2-3/4" backset. Stainless steel or wrought brass.
- STRIKE: 4-7/8" x 1-1/4" (ASA).
- LATCHBOLT: 1/2" throw. Adjustable front for flat or beveled doors.
- HAND: Non-handed.
- TRIM: Zinc diecast levers/wrought brass rose.
- KEYS: Two change keys per lock.
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging
Recommended for Experienced or Professional Installers.
PDQ Extremely Heavy Duty Cylindrical Lock - XGT126 Passage
$142.80
US made, this line of grade 1 door locks gives you the best in security, durability, and cost. The XGT is able to withstand over 3,000 in. lbs. of torque resistance on its lever trim.
The XGT126 is a Passage function lock, where the latch bolt is operated by the lever from either side at all times. There is no locking function.
- Non keyed
- Latchbolt operated by lever from either side at all times
We also offer the XGT Series Cylindrical Lock in several other functions - Entrance/Office, Privacy, Storeroom and Classroom. Compare Functions.
Features
- ANSI Grade 1 Extremely Heavy Duty cylindrical door lock
- Exceeds 3,000 in lbs. of torque resistance
- High Strength stainless steel investment cast spindle. Heavy gauge steel mounting plates.
- Door Situation: Fits left, right wood/metal swing doors
- Architectural Finish
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
Specs
- FOR DOORS: 1-3/4" to 2-1/4" thick. Factory adjusted for 1-3/4"
- DOOR PREP: Fits standard 161 door prep. Through-door thru-bolting.
- BACKSET: 2-3/4" only. Guarded
- FRONT: 2-1/4" x 1-1/8". Beveled 1/8" on 2"
- STRIKE: 4-7/8" x 1-1/4"(ASA).
- LATCHBOLT: 9/16" Throw. Adjustable front for flat or beveled doors.
- HAND: Non-handed.
- TRIM: Zinc diecast levers/wrought brass rose.
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging
Recommended for Experienced or Professional Installers.
PDQ Extremely Heavy Duty Cylindrical Lock - XGT176 Privacy
$161.00
PDQ XGT Series Heavy Duty Cylindrical Lock
US made, this line of grade 1 door locks gives you the best in security, durability, and cost. The XGT is able to withstand over 3,000 in. lbs. of torque resistance on its lever trim.
The XGT176 is a Privacy function lock which features push-button locking. The lock can be opened from the outside with an emergency release. The inside push button can be released by turning the inside lever.
- Non keyed
- Latchbolt operated by lever from either side or emergency release in outside lever
- Outside lever locked by push button on inside
- Outside lever unlocked by emergency release from outside, rotating inside lever, or closing door
We also offer the XGT Series Cylindrical Lock in several other functions - Entrance/Office, Storeroom, Classroom and Passage. Compare Functions.
Features
- ANSI Grade 1 Extremely Heavy Duty cylindrical door lock
- Exceeds 3,000 in lbs. of torque resistance
- High Strength stainless steel investment cast spindle. Heavy gauge steel mounting plates.
- Door Situation: Fits left, right wood/metal swing doors
- Architectural Finish
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
Specs
- FOR DOORS: 1-3/4" to 2-1/4" thick. Factory adjusted for 1-3/4"
- DOOR PREP: Fits standard 161 door prep. Through-door thru-bolting.
- BACKSET: 2-3/4" only. Guarded
- FRONT: 2-1/4" x 1-1/8". Beveled 1/8" on 2"
- STRIKE: 4-7/8" x 1-1/4"(ASA).
- LATCHBOLT: 9/16" Throw. Adjustable front for flat or beveled doors.
- HAND: Non-handed.
- TRIM: Zinc diecast levers/wrought brass rose.
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging
Recommended for Experienced or Professional Installers.
PDQ Extremely Heavy Duty Cylindrical Lock - XGT115 Storeroom
$179.50
US made, this line of grade 1 door locks gives you the best in security, durability, and cost. The XGT is able to withstand over 3,000 in. lbs. of torque resistance on its lever trim.
The XGT115 is a Storeroom function lock, where the latch bolt is operated by a key outside and the lever from the inside. The outside lever is rigid.
- Latchbolt operated by inside lever or key in outside lever
- Outside lever always fixed
We also offer the XGT Series Cylindrical Lock in several other functions - Entrance/Office, Privacy, Classroom and Passage. Compare Functions.
Features
- ANSI Grade 1 Extremely Heavy Duty cylindrical door lock
- Exceeds 3,000 in lbs. of torque resistance
- High Strength stainless steel investment cast spindle. Heavy gauge steel mounting plates.
- Door Situation: Fits left, right wood/metal swing doors
- Architectural Finish
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
Specs
- FOR DOORS: 1-3/4" to 2-1/4" thick. Factory adjusted for 1-3/4"
- DOOR PREP: Fits standard 161 door prep. Through-door thru-bolting.
- BACKSET: 2-3/4" only. Guarded
- FRONT: 2-1/4" x 1-1/8". Beveled 1/8" on 2"
- STRIKE: 4-7/8" x 1-1/4"(ASA).
- LATCHBOLT: 9/16" Throw. Adjustable front for flat or beveled doors.
- HAND: Non-handed.
- TRIM: Zinc diecast levers/wrought brass rose.
- KEYS: Two change keys per lock.
- Cylinder(s) included
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging
Recommended for Experienced or Professional Installers.
PDQ Extremely Heavy Duty Cylindrical Lock - XGT116 Entrance/Office
$179.50
US made, this line of grade 1 door locks gives you the best in security, durability, and cost. The XGT is able to withstand over 3,000 in. lbs. of torque resistance on its lever trim.
The XGT116 is an Entrance/Office function lock, where the door is unlocked by a key from the outside when the outer lever is locked by a turn-button on the inside lever. The inside lever is always unlocked.
- Latchbolt operated by lever from either side or key in outside lever
- Outside lever locked by push/turn button on inside
- When outside lever is locked by push button on inside – key from outside,
or rotating inside lever unlocks outside lever - When outside lever is locked by pushing and turning button on the inside,
key from outside or rotating inside lever retracts latch but does not unlock outside lever
We also offer the XGT Series Cylindrical Lock in several other functions - Privacy, Storeroom, Classroom and Passage. Compare Functions.
Features
- ANSI Grade 1 Extremely Heavy Duty cylindrical door lock
- Exceeds 3,000 in lbs. of torque resistance
- High Strength stainless steel investment cast spindle. Heavy gauge steel mounting plates.
- Door Situation: Fits left, right wood/metal swing doors
- Architectural Finish
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
Specs
- FOR DOORS: 1-3/4" to 2-1/4" thick. Factory adjusted for 1-3/4"
- DOOR PREP: Fits standard 161 door prep. Through-door thru-bolting.
- BACKSET: 2-3/4" only. Guarded
- FRONT: 2-1/4" x 1-1/8". Beveled 1/8" on 2"
- STRIKE: 4-7/8" x 1-1/4"(ASA).
- LATCHBOLT: 9/16" Throw. Adjustable front for flat or beveled doors.
- HAND: Non-handed.
- TRIM: Zinc diecast levers/wrought brass rose.
- KEYS: Two change keys per lock.
- Cylinder(s) included
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging
Recommended for Experienced or Professional Installers.
PDQ Extremely Heavy Duty Cylindrical Lock - XGT148 Classroom
$177.52
US made, this line of grade 1 door locks gives you the best in security, durability, and cost. The XGT is able to withstand over 3,000 in. lbs. of torque resistance on its lever trim.
The XGT148 is a Classroom function lock, where the latch bolt is operated by a lever on either side EXCEPT when the outside lever is locked from the outside by a key.
- Latchbolt operated by lever from either side
- Outside lever locked by key from outside
- Outside lever unlocked by key from outside
- Inside lever always operates latch
We also offer the XGT Series Cylindrical Lock in several other functions - Entrance/Office, Privacy, Storeroom and Passage. Compare Functions.
Features
- ANSI Grade 1 Extremely Heavy Duty cylindrical door lock
- Exceeds 3,000 in lbs. of torque resistance
- High Strength stainless steel investment cast spindle. Heavy gauge steel mounting plates.
- Door Situation: Fits left, right wood/metal swing doors
- Architectural Finish
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
Specs
- FOR DOORS: 1-3/4" to 2-1/4" thick. Factory adjusted for 1-3/4"
- DOOR PREP: Fits standard 161 door prep. Through-door thru-bolting.
- BACKSET: 2-3/4" only. Guarded
- FRONT: 2-1/4" x 1-1/8". Beveled 1/8" on 2"
- STRIKE: 4-7/8" x 1-1/4"(ASA).
- LATCHBOLT: 9/16" Throw. Adjustable front for flat or beveled doors.
- HAND: Non-handed.
- TRIM: Zinc diecast levers/wrought brass rose.
- KEYS: Two change keys per lock.
- Cylinder(s) included
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging
Recommended for Experienced or Professional Installers.
PDQ Mortise Lock - MR126 Passage
$230.00
The PDQ MR Series Mortise Lock is a Grade 1 commercial door lock made in the USA. The J Wide Series Trim covers previous fastener holes when replacing other brands of mortise lock.
The MR126 is a Passage function lock, where the latch bolt is operated by the lever from either side at all times. There is no locking function.
- Non keyed
- Latchbolt is operated by lever from either side
We also offer the MR Series Mortise Lock in several other functions - Entrance/Office, Classroom, Privacy, Apartment/Corridor, and Storeroom. Compare Functions.
We carry four lever styles (see photo) and four handing configurations:
- LH: Left Hand - from key side, hinges are on your left and the door swings away from you.
- RH: Right Hand - from key side, hinges are on your right and the door swings away from you.
- LHR: Left Hand Reverse - from key side, hinges are on your left and the door swings toward you.
- RHR: Right Hand Reverse - from key side, hinges are on your right and the door swings toward you.
Features
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
- Windstorm Resistant
- 12 ga. Heavy Duty Alloy Steel Case
- Single Cam for All Locking Functions
- Four Compression Springs Eliminate Sagging Levers
- Independent Single Retractor Hub
- Stainless Steel Stop Works, Deadbolt, Latchbolt, Deadlatch and Armor Plate
Specs
- FOR DOORS: 1-3/4"
- BACKSET: 2-3/4"
- CASE: 12-gauge cold rolled steel mechanism, dichromated for corrosion resistance
- ARMOR FRONT: Beveled 1/8" on 2"
- STRIKE: Handed Curved Lip Strike
- LATCHBOLT: 3/4" Throw, Investment Cast Stainless Steel, Anti-friction
- DEADBOLT: 1" Throw, Investment Cast Stainless Steel
- TRIM: Stainless steel escutcheon and levers
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
INSTRUCTIONS & TEMPLATES
PDQ Mortise Lock - MR176 Privacy
$239.00
The PDQ MR Series Mortise Lock is a Grade 1 commercial door lock made in the USA. The J Wide Series Trim covers previous fastener holes when replacing other brands of mortise lock.
The MR176 is a Privacy function lock featuring thumbturn locking. The lock can be opened from the outside with a coin. The inside push button can be released by turning the inside lever.
- Non keyed
- Latchbolt operated by lever from either side
- Emergency coin turn outside unlocks outside lever
- Thumbturn inside locks/unlocks outside lever
- Closing door unlocks outside lever
- Rotating inside lever unlocks outside lever
We also offer the MR Series Mortise Lock in several other functions - Entrance/Office, Classroom, Apartment/Corridor, Storeroom and Passage. Compare Functions.
We carry four lever styles (see photo) and four handing configurations:
- LH: Left Hand - from key side, hinges are on your left and the door swings away from you.
- RH: Right Hand - from key side, hinges are on your right and the door swings away from you.
- LHR: Left Hand Reverse - from key side, hinges are on your left and the door swings toward you.
- RHR: Right Hand Reverse - from key side, hinges are on your right and the door swings toward you.
Features
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
- Windstorm Resistant
- 12 ga. Heavy Duty Alloy Steel Case
- Single Cam for All Locking Functions
- Four Compression Springs Eliminate Sagging Levers
- Independent Single Retractor Hub
- Stainless Steel Stop Works, Deadbolt, Latchbolt, Deadlatch and Armor Plate
Specs
- FOR DOORS: 1-3/4"
- BACKSET: 2-3/4"
- CASE: 12-gauge cold rolled steel mechanism, dichromated for corrosion resistance
- ARMOR FRONT: Beveled 1/8" on 2"
- STRIKE: Handed Curved Lip Strike
- LATCHBOLT: 3/4" Throw, Investment Cast Stainless Steel, Anti-friction
- DEADBOLT: 1" Throw, Investment Cast Stainless Steel
- TRIM: Stainless steel escutcheon and levers
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
INSTRUCTIONS & TEMPLATES
PDQ Mortise Lock - MR115 Storeroom
$257.00
The PDQ MR Series Mortise Lock is a Grade 1 commercial door lock made in the USA. The J Wide Series Trim covers previous fastener holes when replacing other brands of mortise lock.
The MR115 is a Storeroom function lock, where the latch bolt is operated by a key outside and the lever from the inside. The outside lever is rigid.
- Latchbolt operated by lever from inside
- Key outside retracts latchbolt
- Rigid outside lever
- Auxiliary latch deadlocks latchbolt
We also offer the MR Series Mortise Lock in several other functions - Entrance/Office, Classroom, Privacy, Apartment/Corridor, and Passage. Compare Functions.
We carry four lever styles (see photo) and four handing configurations:
- LH: Left Hand - from key side, hinges are on your left and the door swings away from you.
- RH: Right Hand - from key side, hinges are on your right and the door swings away from you.
- LHR: Left Hand Reverse - from key side, hinges are on your left and the door swings toward you.
- RHR: Right Hand Reverse - from key side, hinges are on your right and the door swings toward you.
Features
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
- Windstorm Resistant
- 12 ga. Heavy Duty Alloy Steel Case
- Single Cam for All Locking Functions
- Four Compression Springs Eliminate Sagging Levers
- Independent Single Retractor Hub
- Stainless Steel Stop Works, Deadbolt, Latchbolt, Deadlatch and Armor Plate
Specs
- FOR DOORS: 1-3/4"
- BACKSET: 2-3/4"
- CASE: 12-gauge cold rolled steel mechanism, dichromated for corrosion resistance
- ARMOR FRONT: Beveled 1/8" on 2"
- STRIKE: Handed Curved Lip Strike
- LATCHBOLT: 3/4" Throw, Investment Cast Stainless Steel, Anti-friction
- DEADBOLT: 1" Throw, Investment Cast Stainless Steel
- TRIM: Stainless steel escutcheon and levers
- KEYS: Two (2) per Lock
- KEYWAYS: SCC standard (Schlage C Compatible)
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
INSTRUCTIONS & TEMPLATES
PDQ Mortise Lock - MR116 Entrance/Office
$257.00
The PDQ MR Series Mortise Lock is a Grade 1 commercial door lock made in the USA. The J Wide Series Trim covers previous fastener holes when replacing other brands of mortise lock.
The MR116 is an Entrance/Office function lock, where the door is unlocked by a key from the outside when the outer lever is locked by a turn-button on the inside lever. The inside lever is always unlocked.
- Latchbolt operated by lever from either side
- Toggle locks/unlocks outside lever
- Key outside retracts latchbolt
- Auxiliary latch deadlocks latchbolt
We also offer the MR Series Mortise Lock in several other functions - Classroom, Privacy, Apartment/Corridor, Storeroom and Passage. Compare Functions.
We carry four lever styles (see photo) and four handing configurations:
- LH: Left Hand - from key side, hinges are on your left and the door swings away from you.
- RH: Right Hand - from key side, hinges are on your right and the door swings away from you.
- LHR: Left Hand Reverse - from key side, hinges are on your left and the door swings toward you.
- RHR: Right Hand Reverse - from key side, hinges are on your right and the door swings toward you.
Features
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
- Windstorm Resistant
- 12 ga. Heavy Duty Alloy Steel Case
- Single Cam for All Locking Functions
- Four Compression Springs Eliminate Sagging Levers
- Independent Single Retractor Hub
- Stainless Steel Stop Works, Deadbolt, Latchbolt, Deadlatch and Armor Plate
Specs
- FOR DOORS: 1-3/4"
- BACKSET: 2-3/4"
- CASE: 12-gauge cold rolled steel mechanism, dichromated for corrosion resistance
- ARMOR FRONT: Beveled 1/8" on 2"
- STRIKE: Handed Curved Lip Strike
- LATCHBOLT: 3/4" Throw, Investment Cast Stainless Steel, Anti-friction
- DEADBOLT: 1" Throw, Investment Cast Stainless Steel
- TRIM: Stainless steel escutcheon and levers
- KEYS: Two (2) per Lock
- KEYWAYS: SCC standard (Schlage C Compatible)
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
INSTRUCTIONS & TEMPLATES
PDQ Mortise Lock - MR148 Classroom
$257.00
The PDQ MR Series Mortise Lock is a Grade 1 commercial door lock made in the USA. The J Wide Series Trim covers previous fastener holes when replacing other brands of mortise lock.
The MR148 is a Classroom function lock, where the latch bolt is operated by a lever on either side EXCEPT when the outside lever is locked from the outside by a key.
- Latchbolt operated by lever from either side
- Key outside retracts latchbolt
- Inside lever always free
- Auxiliary latch deadlocks latchbolt
We also offer the MR Series Mortise Lock in several other functions - Entrance/Office, Privacy, Apartment/Corridor, Storeroom and Passage. Compare Functions.
We carry four lever styles (see photo) and four handing configurations:
- LH: Left Hand - from key side, hinges are on your left and the door swings away from you.
- RH: Right Hand - from key side, hinges are on your right and the door swings away from you.
- LHR: Left Hand Reverse - from key side, hinges are on your left and the door swings toward you.
- RHR: Right Hand Reverse - from key side, hinges are on your right and the door swings toward you.
Features
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
- Windstorm Resistant
- 12 ga. Heavy Duty Alloy Steel Case
- Single Cam for All Locking Functions
- Four Compression Springs Eliminate Sagging Levers
- Independent Single Retractor Hub
- Stainless Steel Stop Works, Deadbolt, Latchbolt, Deadlatch and Armor Plate
Specs
- FOR DOORS: 1-3/4"
- BACKSET: 2-3/4"
- CASE: 12-gauge cold rolled steel mechanism, dichromated for corrosion resistance
- ARMOR FRONT: Beveled 1/8" on 2"
- STRIKE: Handed Curved Lip Strike
- LATCHBOLT: 3/4" Throw, Investment Cast Stainless Steel, Anti-friction
- DEADBOLT: 1" Throw, Investment Cast Stainless Steel
- TRIM: Stainless steel escutcheon and levers
- KEYS: Two (2) per Lock
- KEYWAYS: SCC standard (Schlage C Compatible)
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
INSTRUCTIONS & TEMPLATES
PDQ Mortise Lock - MR162 Apartment/Corridor
$260.00
The PDQ MR Series Mortise Lock is a Grade 1 commercial door lock made in the USA. The J Wide Series Trim covers previous fastener holes when replacing other brands of mortise lock.
The MR162 is an Apartment/Corridor function lock:
- Latchbolt operated by lever from either side
- Toggle locks/unlocks outside lever
- Key outside retracts latchbolt
- Key outside extends/retracts deadbolt
- Thumbturn inside extends/retracts deadbolt
- Inside lever simultaneously retracts latchbolt and deadbolt
- Auxiliary latch deadlocks latchbolt
We also offer the MR Series Mortise Lock in several other functions - Entrance/Office, Classroom, Privacy, Storeroom and Passage. Compare Functions.
We carry four lever styles (see photo) and four handing configurations:
- LH: Left Hand - from key side, hinges are on your left and the door swings away from you.
- RH: Right Hand - from key side, hinges are on your right and the door swings away from you.
- LHR: Left Hand Reverse - from key side, hinges are on your left and the door swings toward you.
- RHR: Right Hand Reverse - from key side, hinges are on your right and the door swings toward you.
Features
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
- Windstorm Resistant
- 12 ga. Heavy Duty Alloy Steel Case
- Single Cam for All Locking Functions
- Four Compression Springs Eliminate Sagging Levers
- Independent Single Retractor Hub
- Stainless Steel Stop Works, Deadbolt, Latchbolt, Deadlatch and Armor Plate
Specs
- FOR DOORS: 1-3/4"
- BACKSET: 2-3/4"
- CASE: 12-gauge cold rolled steel mechanism, dichromated for corrosion resistance
- ARMOR FRONT: Beveled 1/8" on 2"
- STRIKE: Handed Curved Lip Strike
- LATCHBOLT: 3/4" Throw, Investment Cast Stainless Steel, Anti-friction
- DEADBOLT: 1" Throw, Investment Cast Stainless Steel
- TRIM: Stainless steel escutcheon and levers
- KEYS: Two (2) per Lock
- KEYWAYS: SCC standard (Schlage C Compatible)
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
INSTRUCTIONS & TEMPLATES
PDQ Commercial Deadbolt - KV137 Double Cylinder
$55.00
The PDQ KV is Standard Duty Commercial Grade Deadbolt. The PDQ KV Series deadbolt provides tough, effective protection as a security door lock, while still being an affordable deadbolt. This commercial grade deadbolt is easy to install and fits all standard door preparations, and can be installed on wood doors and on hollow metal doors because they have adjustable backset for easy installation.
The PDQ KV137 is a Double Cylinder deadbolt providing the following functionality:
- Lock or unlock by key from both sides
We also offer the KV Series deadbolt in two other functions - Single Sided with Indicator, and Single Cylinder. Compare Functions.
Features
- Adjustable backset deadbolt for easy installation on wood or metal doors
- Architectural Finish
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
Specs
- FOR DOORS: 1-1/4" to 1-3/4"
- BACKSET: Adjustable 2-3/8" to 2-3/4"
- FRONT: 2-1/4" x 1", Stainless Steel or Wrought Brass
- STRIKE: 2-3/4" x 1-1/8". Brass or stainless steel.
- DEADBOLT: 1" throw with case-hardened roller pin. Brass.
- HAND: Non-handed.
- TRIM: Stainless steel, wrought brass
- KEYS: Two change keys per lock.
Finishes
Satin Chrome 626/US26D
Dark Oxidized Satin Bronze, Oil Rubbed 626/US10B
Installation Challenge Level
Challenging
Recommended for Experienced or Professional Installers.
INSTRUCTIONS & TEMPLATES
PDQ Commercial Deadbolt - KV116 Single Cylinder
$39.60
The PDQ KV is a Standard Duty Commercial Grade Deadbolt. The PDQ KV Series deadbolt provides tough, effective protection as a security door lock, while still being an affordable deadbolt. This commercial grade deadbolt is easy to install and fits all standard door preparations, and can be installed on wood doors and on hollow metal doors because they have adjustable backset for easy installation.
The PDQ KV116 is a Single Cylinder deadbolt providing the following functionality:
- Lock or unlock by key from outside, by thumb turn from inside
We also offer the KV Series deadbolt in two other functions - Single Sided with Indicator, and Double Cylinder. Compare Functions.
Features
- Adjustable backset deadbolt for easy installation on wood or metal doors
- Architectural Finish
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
Specs
- FOR DOORS: 1-1/4" to 1-3/4"
- BACKSET: Adjustable 2-3/8" to 2-3/4"
- FRONT: 2-1/4" x 1", Stainless Steel or Wrought Brass
- STRIKE: 2-3/4" x 1-1/8". Brass or stainless steel.
- DEADBOLT: 1" throw with case-hardened roller pin. Brass.
- HAND: Non-handed.
- TRIM: Stainless steel, wrought brass
- KEYS: Two change keys per lock.
Finishes
Satin Chrome 626/US26D
Dark Oxidized Satin Bronze, Oil Rubbed 626/US10B
Installation Challenge Level
Challenging
Recommended for Experienced or Professional Installers.
INSTRUCTIONS & TEMPLATES
PDQ Commercial Deadbolt - KV125 IND Single Sided with Indicator
$55.00
The PDQ KV is Standard Duty Commercial Grade Deadbolt. The PDQ KV Series deadbolt provides tough, effective protection as a security door lock, while still being an affordable deadbolt. This commercial grade deadbolt is easy to install and fits all standard door preparations, and can be installed on wood doors and on hollow metal doors because they have adjustable backset for easy installation.
The PDQ KV125 IND is a Single Sided with Indicator deadbolt providing the following functionality:
- No key outside
- Indicator outside
- ADA compliant thumbturn inside extends/retracts deadbolt
- Emergency key outside retracts deadbolt
We also offer the KV Series deadbolt in two other functions - Double Cylinder and Single Cylinder. Compare Functions.
Features
- Americans with Disabilities Act (ADA) Compliant
- Adjustable backset deadbolt for easy installation on wood or metal doors
- Architectural Finish
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
Specs
- FOR DOORS: 1-1/4" to 1-3/4"
- BACKSET: Adjustable 2-3/8" to 2-3/4"
- FRONT: 2-1/4" x 1", Stainless Steel or Wrought Brass
- STRIKE: 2-3/4" x 1-1/8". Brass or stainless steel.
- DEADBOLT: 1" throw with case-hardened roller pin. Brass.
- HAND: Non-handed.
- TRIM: Stainless steel, wrought brass
- KEYS: Two change keys per lock.
Finishes
Satin Chrome 626/US26D
Dark Oxidized Satin Bronze, Oil Rubbed 626/US10B
Installation Challenge Level
Challenging
Recommended for Experienced or Professional Installers.
INSTRUCTIONS & TEMPLATES
PDQ Extremely Heavy Duty Cylindrical Lock - XGT135 Intruder Classroom
$255.00
Extremely Heavy Duty Cylindrical Lock - XGT135 Intruder Classroom
US made, this line of grade 1 door locks gives you the best in security, durability, and cost. The XGT is able to withstand over 3,000 in. lbs. of torque resistance on its lever trim.
The XGT135 is a Classroom function lock, where the latch bolt is operated by a lever on either side EXCEPT when the outside lever is locked from the outside by a key.
- Latchbolt operated by lever from either side
- Outside lever locked by key from outside
- Outside lever unlocked by key from outside
- Inside lever always operates latch
We also offer the XGT Series Cylindrical Lock in several other functions - Entrance/Office, Privacy, Storeroom and Passage. Compare Functions.
Features
- ANSI Grade 1 Extremely Heavy Duty cylindrical door lock
- Exceeds 3,000 in lbs. of torque resistance
- High Strength stainless steel investment cast spindle. Heavy gauge steel mounting plates.
- Door Situation: Fits left, right wood/metal swing doors
- Architectural Finish
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
Specs
- FOR DOORS: 1-3/4" to 2-1/4" thick. Factory adjusted for 1-3/4"
- DOOR PREP: Fits standard 161 door prep. Through-door thru-bolting.
- BACKSET: 2-3/4" only. Guarded
- FRONT: 2-1/4" x 1-1/8". Beveled 1/8" on 2"
- STRIKE: 4-7/8" x 1-1/4"(ASA).
- LATCHBOLT: 9/16" Throw. Adjustable front for flat or beveled doors.
- HAND: Non-handed.
- TRIM: Zinc diecast levers/wrought brass rose.
- KEYS: Two change keys per lock.
- Cylinder(s) included
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging
Recommended for Experienced or Professional Installers.
Company Info
Resources
Why Buy From Us?
Huge Inventory
Huge Inventory
No Hassle Returns
Satisfaction
Guaranteed
Guaranteed
News & Updates
Sign up to get the latest on sales, new releases and more …
