PDQ Mortise Lock - MR126 Passage
$299.00
The PDQ MR Series Mortise Lock is a Grade 1 commercial door lock made in the USA. The J Wide Series Trim covers previous fastener holes when replacing other brands of mortise lock.
The MR126 is a Passage function lock, where the latch bolt is operated by the lever from either side at all times. There is no locking function.
- Non keyed
- Latchbolt is operated by lever from either side
We also offer the MR Series Mortise Lock in several other functions - Entrance/Office, Classroom, Privacy, Apartment/Corridor, and Storeroom. Compare Functions.
We carry four lever styles (see photo) and four handing configurations:
- LH: Left Hand - from key side, hinges are on your left and the door swings away from you.
- RH: Right Hand - from key side, hinges are on your right and the door swings away from you.
- LHR: Left Hand Reverse - from key side, hinges are on your left and the door swings toward you.
- RHR: Right Hand Reverse - from key side, hinges are on your right and the door swings toward you.
Features
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
- Windstorm Resistant
- 12 ga. Heavy Duty Alloy Steel Case
- Single Cam for All Locking Functions
- Four Compression Springs Eliminate Sagging Levers
- Independent Single Retractor Hub
- Stainless Steel Stop Works, Deadbolt, Latchbolt, Deadlatch and Armor Plate
Specs
- FOR DOORS: 1-3/4"
- BACKSET: 2-3/4"
- CASE: 12-gauge cold rolled steel mechanism, dichromated for corrosion resistance
- ARMOR FRONT: Beveled 1/8" on 2"
- STRIKE: Handed Curved Lip Strike
- LATCHBOLT: 3/4" Throw, Investment Cast Stainless Steel, Anti-friction
- DEADBOLT: 1" Throw, Investment Cast Stainless Steel
- TRIM: Stainless steel escutcheon and levers
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
INSTRUCTIONS & TEMPLATES
Related Items
PDQ Mortise Lock - MR115 Storeroom-Single Cylinder no deadbolt
$375.00
The PDQ MR Series Mortise Lock is a Grade 1 commercial door lock made in the USA. The J Wide Series Trim covers previous fastener holes when replacing other brands of mortise lock.
The MR115 is a Storeroom function lock, where the latch bolt is operated by a key outside and the lever from the inside. The outside lever is rigid.
- Latchbolt operated by lever from inside
- Key outside retracts latchbolt
- Rigid outside lever
- Auxiliary latch deadlocks latchbolt
We also offer the MR Series Mortise Lock in several other functions - Entrance/Office, Classroom, Privacy, Apartment/Corridor, and Passage. Compare Functions.
We carry four lever styles (see photo) and four handing configurations:
- LH: Left Hand - from key side, hinges are on your left and the door swings away from you.
- RH: Right Hand - from key side, hinges are on your right and the door swings away from you.
- LHR: Left Hand Reverse - from key side, hinges are on your left and the door swings toward you.
- RHR: Right Hand Reverse - from key side, hinges are on your right and the door swings toward you.
Features
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
- Windstorm Resistant
- 12 ga. Heavy Duty Alloy Steel Case
- Single Cam for All Locking Functions
- Four Compression Springs Eliminate Sagging Levers
- Independent Single Retractor Hub
- Stainless Steel Stop Works, Deadbolt, Latchbolt, Deadlatch and Armor Plate
Specs
- FOR DOORS: 1-3/4"
- BACKSET: 2-3/4"
- CASE: 12-gauge cold rolled steel mechanism, dichromated for corrosion resistance
- ARMOR FRONT: Beveled 1/8" on 2"
- STRIKE: Handed Curved Lip Strike
- LATCHBOLT: 3/4" Throw, Investment Cast Stainless Steel, Anti-friction
- DEADBOLT: 1" Throw, Investment Cast Stainless Steel
- TRIM: Stainless steel escutcheon and levers
- KEYS: Two (2) per Lock
- KEYWAYS: SCC standard (Schlage C Compatible)
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
INSTRUCTIONS & TEMPLATES
PDQ Mortise Lock - MR116 Entrance/Office-Single Cylinder no deadbolt
$375.00
The PDQ MR Series Mortise Lock is a Grade 1 commercial door lock made in the USA. The J Wide Series Trim covers previous fastener holes when replacing other brands of mortise lock.
The MR116 is an Entrance/Office function lock, where the door is unlocked by a key from the outside when the outer lever is locked by a turn-button on the inside lever. The inside lever is always unlocked.
- Latchbolt operated by lever from either side
- Toggle locks/unlocks outside lever
- Key outside retracts latchbolt
- Auxiliary latch deadlocks latchbolt
We also offer the MR Series Mortise Lock in several other functions - Classroom, Privacy, Apartment/Corridor, Storeroom and Passage. Compare Functions.
We carry four lever styles (see photo) and four handing configurations:
- LH: Left Hand - from key side, hinges are on your left and the door swings away from you.
- RH: Right Hand - from key side, hinges are on your right and the door swings away from you.
- LHR: Left Hand Reverse - from key side, hinges are on your left and the door swings toward you.
- RHR: Right Hand Reverse - from key side, hinges are on your right and the door swings toward you.
Features
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
- Windstorm Resistant
- 12 ga. Heavy Duty Alloy Steel Case
- Single Cam for All Locking Functions
- Four Compression Springs Eliminate Sagging Levers
- Independent Single Retractor Hub
- Stainless Steel Stop Works, Deadbolt, Latchbolt, Deadlatch and Armor Plate
Specs
- FOR DOORS: 1-3/4"
- BACKSET: 2-3/4"
- CASE: 12-gauge cold rolled steel mechanism, dichromated for corrosion resistance
- ARMOR FRONT: Beveled 1/8" on 2"
- STRIKE: Handed Curved Lip Strike
- LATCHBOLT: 3/4" Throw, Investment Cast Stainless Steel, Anti-friction
- DEADBOLT: 1" Throw, Investment Cast Stainless Steel
- TRIM: Stainless steel escutcheon and levers
- KEYS: Two (2) per Lock
- KEYWAYS: SCC standard (Schlage C Compatible)
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
INSTRUCTIONS & TEMPLATES
PDQ Mortise Lock - MR148 Classroom-Single Cylinder no deadbolt
$375.00
The PDQ MR Series Mortise Lock is a Grade 1 commercial door lock made in the USA. The J Wide Series Trim covers previous fastener holes when replacing other brands of mortise lock.
The MR148 is a Classroom function lock, where the latch bolt is operated by a lever on either side EXCEPT when the outside lever is locked from the outside by a key.
- Latchbolt operated by lever from either side
- Key outside retracts latchbolt
- Inside lever always free
- Auxiliary latch deadlocks latchbolt
We also offer the MR Series Mortise Lock in several other functions - Entrance/Office, Privacy, Apartment/Corridor, Storeroom and Passage. Compare Functions.
We carry four lever styles (see photo) and four handing configurations:
- LH: Left Hand - from key side, hinges are on your left and the door swings away from you.
- RH: Right Hand - from key side, hinges are on your right and the door swings away from you.
- LHR: Left Hand Reverse - from key side, hinges are on your left and the door swings toward you.
- RHR: Right Hand Reverse - from key side, hinges are on your right and the door swings toward you.
Features
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
- Windstorm Resistant
- 12 ga. Heavy Duty Alloy Steel Case
- Single Cam for All Locking Functions
- Four Compression Springs Eliminate Sagging Levers
- Independent Single Retractor Hub
- Stainless Steel Stop Works, Deadbolt, Latchbolt, Deadlatch and Armor Plate
Specs
- FOR DOORS: 1-3/4"
- BACKSET: 2-3/4"
- CASE: 12-gauge cold rolled steel mechanism, dichromated for corrosion resistance
- ARMOR FRONT: Beveled 1/8" on 2"
- STRIKE: Handed Curved Lip Strike
- LATCHBOLT: 3/4" Throw, Investment Cast Stainless Steel, Anti-friction
- DEADBOLT: 1" Throw, Investment Cast Stainless Steel
- TRIM: Stainless steel escutcheon and levers
- KEYS: Two (2) per Lock
- KEYWAYS: SCC standard (Schlage C Compatible)
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
INSTRUCTIONS & TEMPLATES
PDQ Mortise Lock - MR162 Apartment/Corridor-Single Cylinder with deadbolt
$375.00
The PDQ MR Series Mortise Lock is a Grade 1 commercial door lock made in the USA. The J Wide Series Trim covers previous fastener holes when replacing other brands of mortise lock.
The MR162 is an Apartment/Corridor function lock:
- Latchbolt operated by lever from either side
- Toggle locks/unlocks outside lever
- Key outside retracts latchbolt
- Key outside extends/retracts deadbolt
- Thumbturn inside extends/retracts deadbolt
- Inside lever simultaneously retracts latchbolt and deadbolt
- Auxiliary latch deadlocks latchbolt
We also offer the MR Series Mortise Lock in several other functions - Entrance/Office, Classroom, Privacy, Storeroom and Passage. Compare Functions.
We carry four lever styles (see photo) and four handing configurations:
- LH: Left Hand - from key side, hinges are on your left and the door swings away from you.
- RH: Right Hand - from key side, hinges are on your right and the door swings away from you.
- LHR: Left Hand Reverse - from key side, hinges are on your left and the door swings toward you.
- RHR: Right Hand Reverse - from key side, hinges are on your right and the door swings toward you.
Features
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
- Windstorm Resistant
- 12 ga. Heavy Duty Alloy Steel Case
- Single Cam for All Locking Functions
- Four Compression Springs Eliminate Sagging Levers
- Independent Single Retractor Hub
- Stainless Steel Stop Works, Deadbolt, Latchbolt, Deadlatch and Armor Plate
Specs
- FOR DOORS: 1-3/4"
- BACKSET: 2-3/4"
- CASE: 12-gauge cold rolled steel mechanism, dichromated for corrosion resistance
- ARMOR FRONT: Beveled 1/8" on 2"
- STRIKE: Handed Curved Lip Strike
- LATCHBOLT: 3/4" Throw, Investment Cast Stainless Steel, Anti-friction
- DEADBOLT: 1" Throw, Investment Cast Stainless Steel
- TRIM: Stainless steel escutcheon and levers
- KEYS: Two (2) per Lock
- KEYWAYS: SCC standard (Schlage C Compatible)
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
INSTRUCTIONS & TEMPLATES
PDQ Mortise Lock - MR176 Privacy
$364.00
The PDQ MR Series Mortise Lock is a Grade 1 commercial door lock made in the USA. The J Wide Series Trim covers previous fastener holes when replacing other brands of mortise lock.
The MR176 is a Privacy function lock featuring thumbturn locking. The lock can be opened from the outside with a coin. The inside push button can be released by turning the inside lever.
- Non keyed
- Latchbolt operated by lever from either side
- Emergency coin turn outside unlocks outside lever
- Thumbturn inside locks/unlocks outside lever
- Closing door unlocks outside lever
- Rotating inside lever unlocks outside lever
We also offer the MR Series Mortise Lock in several other functions - Entrance/Office, Classroom, Apartment/Corridor, Storeroom and Passage. Compare Functions.
We carry four lever styles (see photo) and four handing configurations:
- LH: Left Hand - from key side, hinges are on your left and the door swings away from you.
- RH: Right Hand - from key side, hinges are on your right and the door swings away from you.
- LHR: Left Hand Reverse - from key side, hinges are on your left and the door swings toward you.
- RHR: Right Hand Reverse - from key side, hinges are on your right and the door swings toward you.
Features
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
- Windstorm Resistant
- 12 ga. Heavy Duty Alloy Steel Case
- Single Cam for All Locking Functions
- Four Compression Springs Eliminate Sagging Levers
- Independent Single Retractor Hub
- Stainless Steel Stop Works, Deadbolt, Latchbolt, Deadlatch and Armor Plate
Specs
- FOR DOORS: 1-3/4"
- BACKSET: 2-3/4"
- CASE: 12-gauge cold rolled steel mechanism, dichromated for corrosion resistance
- ARMOR FRONT: Beveled 1/8" on 2"
- STRIKE: Handed Curved Lip Strike
- LATCHBOLT: 3/4" Throw, Investment Cast Stainless Steel, Anti-friction
- DEADBOLT: 1" Throw, Investment Cast Stainless Steel
- TRIM: Stainless steel escutcheon and levers
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
INSTRUCTIONS & TEMPLATES
Company Info
Resources
Why Buy From Us?
Huge Inventory
Huge Inventory
No Hassle Returns
Satisfaction
Guaranteed
Guaranteed
News & Updates
Sign up to get the latest on sales, new releases and more …
