Washroom Accessories

• Roll formed, interlocking frame with heliarc welded corners
• Corners are ground and polished smooth to a uniform satin finish
• Type 304 stainless steel frame
• Concealed hanging bracket
• Tamper-proof set screws lock onto top and bottom of frame
• One-piece back plate with theft-resistant locking device
• Surface Mounted
• Various sizes and reflective surfaces available

Plate Glass

• 0600-1620 – 16” wide x 20” high (406 x 508 mm)
• 0600-1624 – 16” wide x 24” high (406 x 610 mm)
• 0600-1630 – 16” wide x 30” high (406 x 762 mm)
• 0600-1824 – 18” wide x 24” high (457 x 610 mm)
• 0600-1830 – 18” wide x 30” high (457 x 762 mm)
• 0600-1836 – 18” wide x 36” high (457 x 914 mm)
• 0600-2060 – 20” wide x 60” high (508 x 1524 mm)
• 0600-2430 – 24” wide x 30” high (610 x 762 mm)
• 0600-2436 – 24” wide x 36” high (610 x 914 mm)
• 0600-2442 – 24” wide x 42” high (610 x 1067 mm)
• 0600-2448 – 24” wide x 48” high (610 x 1219 mm)
• 0600-2460 – 24” wide x 60” high (610 x 1524 mm)
• 0600-2472 – 24” wide x 72” high (610 x 1829 mm)
• 0600-3036 – 30” wide x 36” high (610 x 914 mm)
• 0600-3636 – 36” wide x 36” high (914 x 914 mm)
• 0600-3648 – 36” wide x 48” high (914 x 1219 mm)
• 0600-4830 – 48” wide x 30” high (1219 x 762 mm)
• 0600-4836 – 48” wide x 36” high (1219 x 914 mm)
• 0600-6036 – 60” wide x 36” high (1524 x 914 mm)
• 0600-7236 – 72” wide x 36” high (1829 x 914 mm)

Tempered Glass

• 0600-B1824 – 18” wide x 24” high (457 x 610 mm)
• 0600-B1830 – 18” wide x 30” high (457 x 762 mm)
• 0600-B1836 – 18” wide x 36” high (457 x 914 mm)
• 0600-B2430 – 24” wide x 30” high (610 x 762 mm)
• 0600-B2436 – 24” wide x 36” high (610 x 914 mm)
• 0600-B2448 – 24” wide x 48” high (610 x 1219 mm)
• 0600-B2460 – 24” wide x 60” high (610 x 1524 mm)
• 0600-B2472 – 24” wide x 72” high (610 x 1829 mm)

Stainless Steel, Type 304 with #8 Finish

• 0600-C1418 – 14” wide x 18” high (356 x 457 mm)
• 0600-C1824 – 18” wide x 24” high (457 x 610 mm)
• 0600-C1830 – 18” wide x 30” high (457 x 762 mm)
• 0600-C2430 – 24” wide x 30” high (610 x 762 mm)
• 0600-C2436 – 24” wide x 36” high (610 x 914 mm)
• 0600-C2460 – 24” wide x 60” high (610 x 1524 mm)

Series
0600 Series

Type
Stainless Steel Inter-Lok Angle Frame Mirror

Frame
3⁄4″ x 5⁄8″ (19 x 16 mm) roll formed 18 gauge type 304 stainless steel angle

Frame Finish
Uniform satin finish

Construction
Type 304 stainless steel

Mounting
Surface Mounted

Reflective Surface Options
Plate Glass, Tempered Glass, and Stainless Steel Type 304 with #8 Finish

Back Plate
One piece, attached to frame with theft-resistant locking device

Plate Glass
#1 quality polished plate glass with silver coating and protective copper plating. Image quality: BEST.

Tempered Glass
1/4″ (6.4 mm) polished tempered glass with silver coating. Image quality: BETTER.

Stainless Steel with #8 Finish
Type 304 stainless steel polished to a #8 mirror finish. Image quality: FAIR.

Reflective quality may vary by surface type, and the likelihood of distortion increases as reflective surface size increases.

• Frame: Type 304 Stainless Steel - Satin Finish
• Reflective Surface: Plate Glass
• Reflective Surface: Tempered Glass
• Reflective Surface: Type 304 Stainless Steel with #8 Finish

Install bracket level and plumb as per diagram location using #10 self-threading screws (by others).

Hang mirror on bracket and tighten locking screws at top and bottom.

For compliance with 2010 ADA Accessibility Standards and 2015 ABA Standards, bottom edge of reflecting surface should be no higher than 40″ [1016] Above Finished Floor.

• Product Care & Maintenance
• Mirror Size Options Chart
• Technical Data Sheet – 0600 Series

• One-piece stainless steel channel encases mirror and backing
• Tight mitered corners add sophistication
• Type 304, alloy 18-8 stainless steel - Satin Finish Frame
• Plate Glass Mirror
• Surface Mounted
• Various sizes and glazing options
• Mirror is held secure by theft-resistant screws

Series
0620 Series

Type
Stainless Steel Chan-Lok Frame Mirror

Dimensions
Various sizes and glazing options

Mounting
Surface Mounted

Frame
18-8, type 304, 20 gauge stainless steel. Exposed surfaces have satin finish. Edges and corners are burr free.

Glass
Standard glazing is #1 quality, 1/4" [6.4] thick plate/float, silver coated and hermetically sealed with a uniform coating of electrolytic copper plating, warranted against silver spoilage for 15 years. Mirrors meet Federal Spec. DD-M-411C, ASTM C-1503, and ASTM C-1036-91.

Filler
Expanded polyethylene microcell foam sheet material, abrasion resistant and shock absorbing, water resistant, 1/8" [3.2] total layer thickness.

Plate Glass
#1 quality polished, silver coated and hermetically sealed with an electrolytic copper plating. Image quality: BEST

Tempered Glass
1/4" [6.4] thick polished tempered glass with two coats of silver. Image quality: BETTER

Important
The reflective quality of tempered glass is not as true as plate glass. As the reflective surface size increases, regardless of glazing type, the likelihood of distortion also increases.

• Type 304, alloy 18-8 stainless steel - Satin Finish Frame

Install “H” wall brackets level and plumb per diagram location using ONLY #8 or #10 Pan Head screws (by others).

Hang mirror on brackets and tighten locking screw (#6-32Fx3/4" Philips Pan Head, supplied separately taped to mirror back) at bottom (note: this screw should be started prior to hanging mirror on wall bracket).

For compliance with 2010 ADA Accessibility Standards and ABA Standards 2015, bottom edge of reflecting surface should be no higher than 40" [1016] Above Finished Floor.

Mirrors larger than 32 sq. ft. (2.97 m²) are fabricated in two (2) or more sections to provide installation and handling ease.

• Product Care & Maintenance
• Technical Data Sheet – 0620 Series
• Mirror Chart