Washroom Accessories

• Horizontal baby changing station
• Recessed mounting
• Type 304 stainless steel door facing and collar
• Available in Satin Finish or Matte Black Powder Coated finish
• Unit complies with 2010 ADA Accessibility Standards
• Intended use for infants up to 3.5 years old and up to 50 lbs (23kg)
• Bed is designed to cradle a child’s body
• Adjustable two-part vinyl-coated safety strap with Sure-Lock latch
• Integral bag hook
• Bed-liner dispenser convertible to a multi-fold towel dispenser
• Damped gas spring aids one-handed operation using less than 5 lbs force (22.2N)

Series
9018 Series

Models
9018 / 9018-41

Type
Baby Changing Station, HORIZONTAL – STAINLESS STEEL, Recessed

Closed Dimensions
39-5⁄32″ x 28-1/4″ x 3⁄8″ (995 x 718 x 10 mm)

Open Dimensions
39-5/32” x 28-1/4” x 18-1/8” (995 x 718 x 460 mm)

Wall Opening
35-1/2″ x 24-1/2″ x 4″ min (902 x 622 x 102 mm)

Construction
Type 304 Stainless Steel

Mounting
Recessed

9018 Finish
Satin Finish

9018-41 Finish
Matte Black Powder Coated

Intended Use
Infants up to 3.5 years old and up to 50 lbs (23kg)

Static Load Testing
Tested during development to sustain 250 lbs (113 kg) static load with minimal deflection.

• 9018 – Type 304 Stainless Steel - Satin Finish
• 9018-41 – Type 304 Stainless Steel - Matte Black Powder Coated

• Complies with 2010 ADA Accessibility Standards
• ASTM F-2285 & F-2388 compliant
• G-21 and G-22 compliant
• ANSI Z535 compliant
• ANSI 117.1 compliant
• EN 12221-1 and EN 12221-2 compliant
• Adjustable two-part vinyl-coated safety strap with Sure-Lock latch
• Operable using less than 5 lbs force (22.2N)

Unit platform is shaped to keep a child restrained from rolling out of the bed. Unit is easily opened and closed by user with one hand in any location and handle cavity is provided on door face for preferred use.

Unit is operable with less than 5 Lbf (22.2N) while not requiring any tight grasping, pinching or twisting of the wrist.

Bed liner/towel dispenser presents liners or towels for user hygiene and convenience. Dispenser lid is provided for sanitary protection and ease of loading of wipes or liners.

Safety strap is easily adjustable by user for baby size and Sure-Lock latch securely resists opening until released by opposing finger pressure by adult caretaker/parent.

Liners/towels are easily replenished by service personnel as required.

Unit is recess mounted using hardware supplied through concealed mounting holes. The supplied hardware kit contains fasteners suitable for metal or wood stud walls in dry locations and general hollow wall construction where adequate substrate strength is obtained.

Fasteners and anchors for masonry walls are not provided. Wall reinforcement must be suitable to sustain transfer of maximum unit loading.

Mounting hole plug covers are supplied to conceal fasteners after installation.

Provide Rough Wall Opening (RWO) of required depth from face of finished wall. Mount unit in properly framed RWO using four (4) #10 x 1-1/2″ [M5 x 38] self-threading pan head screws through side holes.

Alternate rear-hole mounting may be used where wall depth and framing reinforcement permits, using suitable fasteners appropriate for wall conditions.

Rough Wall Opening (RWO) required is 35-1/2″ W x 24-1/2″ H x 4″ D minimum [902 x 622 x 102].

• Product Care & Maintenance
• Installation, Maintenance & Operation Owner's Manual – 9018 Series
• Technical Data Sheet – 9018 – Satin Finish
• Technical Data Sheet – 9018-41 – Matte Black

• Horizontal baby changing station
• 100% high-density polyethylene construction
• Surface Mounted
• Low profile – only 4″ (102 mm) deep when closed
• Designed to support an infant up to 3.5 years old and up to 50 lbs (23 kg)
• Bed is shaped to cradle a child’s body
• Easy one-handed operation
• Adjustable two-part safety strap with Sure-Lock latch
• Two integral bag hooks
• Bed-liner dispenser convertible to a multi-fold towel dispenser
• Damped gas spring aids one-handed operation

Model
9012

Type
Baby Changing Station, HORIZONTAL – PLASTIC

Closed Dimensions
36” x 22” x 4” (914 x 559 x 102 mm)

Open Dimensions
36” x 22” x 20-7/16” (914 x 559 x 519 mm)

Construction
High-Density Polyethylene (HDPE)

Mounting
Surface Mounted

Intended Use
Infants up to 3.5 years old and up to 50 lbs (23 kg)

• ADA compliant
• ASTM F-2285 & F-2388 compliant
• ANSI Z535 compliant
• ANSI 117.1 compliant
• Adjustable safety strap with Sure-Lock latch
• Operable with less than 5 lbs force (22.2N)
• No tight grasping, pinching or twisting of the wrist is required for operation

Unit platform is shaped to cradle a child’s body. Unit is easily opened and closed by user with one hand anywhere on top or front edge of bed or using bag hooks/hand grips on sides.

Bed liner/towel dispenser presents liners or towels for user hygiene and convenience. Dispenser lip retains stack for single liner/towel dispensing.

Safety strap is easily adjustable by user for baby size and Sure-Lock latch securely resists opening until released by opposing finger pressure by adult caretaker.

Ensure that the liner compartment is adequately stocked. Thoroughly clean the unit daily with warm water and mild anti-bacterial detergent, rinse with clean water and dry. Do not use abrasive cleaning agents.

Periodically inspect the unit to ensure that it remains securely attached to the wall and that the unit and wall mounting have not been affected by vandalism or abnormal wear.

Surface mount unit using hardware supplied through recessed mounting holes provided. Hardware kit supplied has fasteners suitable for metal or wood stud walls in dry locations and general hollow wall construction where adequate substrate strength is obtained.

Fasteners and anchors for masonry walls are not provided. Wall reinforcement must be suitable to sustain transfer of maximum unit loading.

Locate wall studs at 16″ (406 mm) O.C. for fastening the station. If two wall studs cannot be used, use two screws into one stud and install suitable toggle fasteners securely at the non-stud location.

Attach unit to wall studs with four 1/4″ x 3″ long Philips pan head self-threading screws with flat washers. Where wall studs are not available, attach with four 1/4″-20 x 3″ toggle bolts with flat washers into toggles or expansion nuts.

Installation should be performed by a qualified technician, and the wall and attachment method must be strong enough to support the rated load.

• Product Care & Maintenance
• Installation & Maintenance Instructions – 9012
• Technical Data Sheet – 9012