Toilet Accessories

• Single Roll Dispenser
• Type 304 Stainless Steel
• Chrome-plated roller
• Heavy gauge concealed bracket mounts on wall
• Secured with stainless steel set screw
• Holds 1800 sheet standard core roll
• Mounting plates are 18 gauge steel
• Surface Mounted
• For theft-resistant spindle, add R-009 after model number

Series
7305 Series

Type
Toilet Tissue Holder (Single)

Dimensions
7-3/4″ x 2″ x 3-7/8″ (207 x 51 x 98 mm)

Construction
Type 304 Stainless Steel

Roller
Chrome-plated roller

Mounting Plates
18 gauge steel

Mounting
Surface Mounted

Capacity
Holds 1800 sheet standard core roll

• 7305-B – Bright Finish
• 7305-S – Satin Finish

Spring-loaded spindles revolve freely and hold rolls until cores are removed.

Surface mount unit on wall using #10 self-threading screws (by others) through holes provided in mounting plates into suitable prepared mountings (by others) or other suitable mounting hardware (by others) to suit wall conditions.

Hang post and flange assemblies on mounting plates and tighten setscrews to lock units to plates.

For compliance with ICC/ANSI A-117.1-2003 and 2010 ADA Accessibility Standards install unit so that center line of dispenser is 7″ [178] min to 9″ [229] Max in front of toilet and dispenser center is 15″ [381] Min AFF to 48″ [1219] Max AFF.

Recommended mounting height for general utility is 30″ [762] AFF to centerline of roll and 14″ [356] from front of commode to centerline of dispenser.

• Product Care & Maintenance
• Technical Data Sheet – 7305-B – Bright Finish
• Technical Data Sheet – 7305-S – Satin Finish

• Double Hook
• Type 304 Stainless Steel - Satin Finish
• Surface Mounted
• 4″ (102 mm) wide stainless steel bar forms hook at each end
• Hook is suitable for robes or clothing and small carry bags

Model
7345-S

Type
Robe Hook (Double)

Dimensions
4″ x 2″ x 2″ (102 x 51 x 51 mm)

Construction
Type 304 Stainless Steel - Satin Finish

Mounting
Surface Mounted

• 7345-B – Bright Finish
• 7345-S – Satin Finish

Hook is suitable for a robe or clothing and small carry bags.

Surface mount unit on door back or wall using two (2) #10 self-threading screws (by others) through holes provided in mounting plate into suitable prepared mountings (by others) or other suitable mounting hardware (by others) to suit door or wall conditions. Hang post and flange assembly on mounting plate and tighten set screw to lock unit to plate.

For compliance with ICC/ANSI A-117.1-2003 and 2010 ADA Accessibility Standards, install unit with top of hook 48″ [1219] maximum Above Finished Floor (AFF) or 46″ [1168] max AFF if side reach access over an obstruction (e.g. vanity) with reach depth greater than 10″ [254] and less than 25″ [635] is only provided or 44″ [1118] max AFF if forward reach over an obstruction with reach depth greater than 20″ [508] and less than 25″ [635] is only provided.

For general utility, install hook with centerline of mounting plate 68″ [1727] AFF.

• Product Care & Maintenance
• Technical Data Sheet – 7345-S
• Technical Data Sheet – 7345-B