Seat Cover Dispensers

• Dispenses 250 seat covers
• 20 gauge type 304 stainless steel construction
• Satin finish
• Surface mounted
• Curved front adds strength and elegance
• Concealed, multi-staked piano hinge
• Covers are self-feeding until supply is depleted
• Concealed bottom opening allows manual reloading

Model
20477-SM

Series
Roval™

Type
Surface Mounted Toilet Seat Cover Dispenser

Dimensions
15-3/4″ x 11″ x 2-3/8″ (400 x 280 x 60 mm)

Construction
20 gauge Type 304 Stainless Steel

Finish
Satin Finish

Mounting
Surface Mounted

Capacity
Dispenses 250 seat covers

Hinge
Concealed, Multi-Staked Piano Hinge

• Satin Finish

Covers are self-feeding until supply is depleted. Unit is manually reloaded with a full box through concealed opening in bottom on schedule determined by maintenance requirements.

Regularly inspect and replenish the supply of toilet seat covers according to facility maintenance requirements.

Clean stainless steel surfaces regularly with a soft clean rag moistened with a mild detergent, followed by a water-moistened clean rag and then a dry rag.

Mount unit on wall or partition surface using two (2) #10 x 1-1/4″ [32] self-threading flat head screws (by others).

Mounting holes are accessible through the dispenser slot during installation and are concealed behind the dispenser box after the dispensing product is loaded for vandal-resistant installation.

For compliance with 2010 ADA Accessibility Standards, install unit so that centerline of dispenser slot is 48″ [1219] maximum Above Finished Floor (AFF) if clear floor access is provided.

Where only side reach over an obstruction is provided, such as over a vanity, centerline of dispenser slot should be 46″ [1168] maximum AFF.

• Product Care & Maintenance
• Technical Data Sheet – 20477-SM

• Dispenses 250 single or half-fold seat covers
• Fabricated of 22 gauge type 304 stainless steel with satin finish
• Heavy-duty 3/16″ Dia. [Ø4.8] stainless steel multi-staked piano hinged door
• Door includes tumbler lock
• Type 304 Stainless Steel - Satin Finish
• Surface Mounted

Model
0477-SM

Type
Toilet Seat Cover Dispenser – Surface Mounted

Dimensions
15-3/4” x 11” x 1-7/8” (400 x 279 x 48 mm)

Construction
Type 304 Stainless Steel - Satin Finish

Cabinet
22 gauge

Mounting
Surface Mounted

Capacity
Dispenses 250 standard single or half-fold paper toilet seat covers

• Type 304 Stainless Steel - Satin Finish

Covers are self-feeding until supply is depleted. Unit is manually reloaded with a full box through concealed opening in bottom on schedule determined by maintenance requirements.

Unit is surface mounted on wall or partition using two (2) #10 x 1-1/2″ [Ø5 x 40] self-threading screws (by others).

Mounting holes are hidden behind dispenser box for vandal resistant locking but clearly accessible through dispenser slot for installation hanging.

For compliance with 2010 ADA Accessibility Standards, unit should be installed so that dispenser slot is 54″ [1372] maximum above finished floor (AFF) if clear floor side reach access is provided or 48″ [1219] maximum AFF if clear floor forward reach access only is provided or 46″ [1168] maximum AFF if side reach over an obstruction only is provided (ie: vanity).

• Product Care & Maintenance
• Technical Data Sheet – 0477-SM