Toilet Accessories

• Single robe hook
• Fabricated from rust resistant Zamak
• Stainless steel wall bracket
• Stainless steel hex socket set screw provided along base of flange
• Chrome Plated
• Surface Mounted

Model
0740-Z

Type
Robe Hook (Single)

Dimensions
2-1/8″ x 1-7/16″ x 2-1/8″ (54 x 37 x 54 mm)

Construction
Chrome Plated Zamac

Wall Bracket
Stainless Steel

Mounting
Surface Mounted

• Chrome Plated

Washroom accessory products require regular surface cleaning. Clean with a soft clean rag moistened with a mild detergent, followed by a water-moistened clean rag and then a dry rag.

Wall bracket is surface mounted using #10 self-threading screws (supplied) through holes provided. Hook is secured to bracket by tightening stainless steel hex socket set screw.

Typical mounting suggestion is 66″ [1676] Above Finished Floor (AFF).

For compliance with 2010 ADA Accessibility Standards, unit should be installed so that top of hook is 54″ [1372] maximum AFF if clear floor side reach access is provided or 48″ [1219] maximum AFF if clear floor forward reach access is provided.

• Product Care & Maintenance
• Technical Data Sheet – 0740-Z

• Single Hook
• Type 304 Stainless Steel - Satin Finish
• Surface Mounted
• Hook extends 2" [51] from wall
• Hook is suitable for a robe or clothing and small carry bags

Model
7340-S

Type
Robe Hook (Single)

Dimensions
2" [51] W x 2" [51] H x 2" [51] D

Construction
Type 304 Stainless Steel - Satin Finish

Mounting
Surface Mounted

• 7340-B – Bright Finish
• 7340-S – Satin Finish

Hook is suitable for a robe or clothing and small carry bags.

Surface mount unit on door back or wall using two (2) #10 self-threading screws (by others) through holes provided in mounting plate into suitable prepared mountings (by others) or other suitable mounting hardware (by others) to suit door or wall conditions.

Hang post and flange assembly on mounting plate and tighten set screw to lock unit to plate.

For compliance with ICC/ANSI A-117.1-2003 and 2010 ADA Accessibility Standards, install unit with top of hook 48" [1219] maximum Above Finished Floor (AFF) or 46" [1168] max AFF if side reach access over an obstruction (e.g. vanity) with reach depth greater than 10" [254] and less than 25" [635] is only provided or 44" [1118] max AFF if forward reach over an obstruction with reach depth greater than 20" [508] and less than 25" [635] is only provided.

For general utility, install hook with centerline of mounting plate 68" [1727] AFF.

• Product Care & Maintenance
• Technical Data Sheet – 7340-S
• Technical Data Sheet – 7340-B