Cal-Royal ZWDB-10 Z-Wave Touch Screen Electronic Deadbolt




Cal-Royal ZWDB-10 — Electronic Z-Wave Deadbolt (Keyed Override)

Cal-Royal ZWDB-10 is a Z-Wave enabled touchscreen electronic deadbolt with keyed override. Supports standard 2-1/8″ cross-bore and 1″ edge-bore, adjustable backset 2-3/8″ or 2-3/4″. 30 user codes (4–10 digits), random pre-entry, auto-lock, service code, low-battery alert. Powered by 4× AA.

Main Features

  • Administrator Code - 1 group administrator password, 4-10 digits. It is used for managing all codes. Add / delete user's code individually.

  • User Codes - this feature only opens the lock by entering the code on the touchpad. It can accommodate up to 30 sets of passcode, 4-10 digits.

  • Pre-Entry Codes - random pre-entry code prevents deciphering of user code. It is also useful to remove remaining fingerprint smudges and prevent exposure of password.

  • Disposable Code - one-time user code is available for temporary access.

  • Touch screen panel - this feature helps ease of operating in the dark. It is useful in making sure that every key pressed is successfully entered by an accompanying beep / tone.

  • Auto-Locking Function - when the door is unlocked, it automatically locks within just a few seconds for security and convenience.

  • Low Battery Warning - when voltage is lower than safety power, the low battery indicator will turn on until the low battery alarm goes off, then you have to change the batteries.

  • User Friendly Design - simplifies your access management.

  • Z-Wave Technology - it has a built-in 500 Series Z-WAVE module to connect with compatible controller / hub with gateway frequency of 908.4 MHz. By using an existing controller, you could use app and / or mobile phone to manage all compatible devices such as control lights, security systems, and home automation in one tap.

  • High-Strength Deadbolt - 1" throw high-strength deadbolt with anti-saw pin.

  • Deadbolt Detection - touchpad deadbolt with auto latch bolt locking detection prevents any incomplete door locking.

  • Non-Handed - ZWDB-10 Series can be installed for both left and right door opening.

Applications For Residential and Standard Duty Commercial Applications
Door Ranges 1 ⅜” (35mm) to 1 ¾” (45mm) Thickness
Material Zinc Alloy and Steel
Backset 2 ⅜” (60mm) or 2 ¾” (70mm) 2-Way Adjustable Backset
Latch Faceplate 1” (25.4mm) × 2 ¼” (57mm) Square Corner
Strike 1” (25.4mm) × 2 ¼” (57mm) Square Corner Strike
Deadbolt 1” Throw High-Strength Deadbolt with Anti-Saw Pin
Power Supply 4 AA 1.5V Alkaline Batteries (comes standard in packing)
Door Preparation 1” (25.4mm) Diameter for Edge Bore
2 ⅛” (54mm) Cross Bore
Dimensions Exterior Trim: 5 ¼” (133mm) × 2 ⅝” (67mm) × 11/16” (23mm)
Interior Trim: 7 7/16” (189mm) × 2 ⅞” (73mm) × 1 ⅛” (28mm)
Cylinder & Keyways 5-Pin, Kwikset KW1 Keyway
Finishes US3 - Bright Brass
US15 - Satin Nickel
US26 - Bright Chrome
US26D - Satin Chrome
US12P - Tuscany

  • US26 — Polished Chrome
  • US26D — Satin Chrome
  • US12P — Satin Bronze (Clear Coated)
  • US15 — Satin Nickel
  • US3 — Bright Brass

Installation Difficulty

 

Level 2 — Skilled DIY: Standard deadbolt prep; keypad setup; Z-Wave pairing.



Related Items