Grab Bars

• Straight grab bar
• Snap Flange – cover snaps over mounting flange to conceal screws
• Type 304 Stainless Steel – Matte Black Powder Coated
• Smooth surface
• Surface mounted
• 18 gauge tubing with 1-1/2″ Outside Diameter (38 mm)
• Available in 18″, 24″, 36″, 42″ and 48″ lengths
• 1-1/2″ (38 mm) wall clearance

• 3801-18-41 – 18″ Length (457 mm)
• 3801-24-41 – 24″ Length (610 mm)
• 3801-36-41 – 36″ Length (914 mm)
• 3801-42-41 – 42″ Length (1067 mm)
• 3801-48-41 – 48″ Length (1219 mm)

Series
3801-41 Series

Type
Straight Snap Flange Grab Bar

Available Lengths
18″ (457 mm), 24″ (610 mm), 36″ (914 mm), 42″ (1067 mm), 48″ (1219 mm)

Outside Diameter
1-1/2″ (38 mm)

Tubing
18 Gauge Type 304 Stainless Steel

Surface
Smooth

Mounting Flange
3-1/8″ (79 mm) O.D., 1/8″ (3 mm) thick Type 304 stainless steel with 2 screw holes and 3 locking dimples

Snap-On Cover
22 gauge Type 304 stainless steel, 3-3/16″ (81 mm) diameter

Wall Clearance
1-1/2″ (38 mm)

Mounting
Surface Mounted

Capacity
Designed to meet and exceed 2010 ADA Accessibility Standards and ANSI A117.1 requirements for a load in excess of 250 lbs (113.4 kg) when properly mounted

• Matte Black Powder Coated Finish

All accessible Matte Black Powder Coated surfaces should be cleaned with a mild liquid soap only. The surfaces should then be wiped and dried.

In areas containing showers, the accessories must receive ventilation from the outside so that excess humidity can escape.

Do not use abrasive powders or scouring pads, water closet cleaners, ceramic tile cleaners, solutions containing more than 1% ammonia by volume, solutions containing acids or lye, or solutions containing enzymes.

Use grab bar as a template to mark mounting hole locations and pre-drill holes.

Install bar using two (2) #10 self-threading flat head or oval head screws (by others), or other suitable fastener system (by others), for each flange.

Appropriate anchoring and backing must be provided in accordance with local building codes or as specified on architectural plans prior to wall finishing.

For compliance with 2010 ADA Accessibility Standards, install unit so that the top of the grab bar is 33″ (840 mm) minimum Above Finished Floor (AFF) to 36″ (915 mm) maximum AFF.

Anchors are available from ASI and must be specified separately for each grab bar style scheduled.

• Product Care & Maintenance
• Grab Bar Configurations
• Technical Data Sheet – 3801-18-41 – 18″
• Technical Data Sheet – 3801-24-41 – 24″
• Technical Data Sheet – 3801-36-41 – 36″
• Technical Data Sheet – 3801-42-41 – 42″
• Technical Data Sheet – 3801-48-41 – 48″