Cal-Royal Explorer XP/XPRL Series - XP-T360-05
$128.00
Grade 2 Locksets
For Offices, Schools, Hospitals, Apartments, Hotel / Motel, Residential, Commercial and Public Buildings.
- BHMA Certified Lifetime Warranty, GRADE 2
- Conforms with ANSI A 156.2 Series 4000, Heavy Duty, Barrier Free
- UL listed 3-hour rating, conforms to standards UL10C and UBC7-2-1997
- Solid brass 6 pin “C” keyway cylinder, optional other keyways
- Optional Interchangeable Core
- Non-Clutch Mechanism
- Optional thru-bolted installation
- Individual spring on each side to prevent lever sag, maintain reliability and reduce maintenance
- Optional Tactile and Lead Lining
- Meets the Buy American Act
Features
- APPLICATIONS For offices, schools, hospitals, apartments, hotel / motel, residential, commercial and public buildings.
- DOOR RANGES 1 ⅜” to 2” thickness doors.
- BACKSET 2 ¾” Standard, 2 ⅜”, 3 ¾” and 5” optional.
- LATCH BOLT ½” Throw solid brass, reversible for RH or LH applications. UL Listed.
- LATCH FACEPLATE 2 ¼” x 1”, square corner packed with ⅛” plastic filler for 1 ⅛” width.
- ANSI STANDARDS Meets or exceeds requirements of BHMA/ANSI A156.2 Series 4000, Grade 2 (FF-H 106C), 400,000 cycles.
- EXPOSED TRIM Wrought brass, bronze or stainless steel, levers are Zinc casting, plated to match trim finish.
- KEYING 6-pin “C” keyway cylinder, 2 keys per lock. Keying as per individual job requirement.
- CYLINDER & KEYWAYS 6 pin solid brass “C” keyway standard. Schlage E, Schlage C-K, Russwin D1-2-3-4, Corbin 59 / 60, Corbin-Russwin L4, Sargent LA-LB-LC, Falcon / Weiser E, Arrow A, Yale 8, Yale GA and Kwikset. Can also accept Medeco, Assa, Kaba and Cal-Royal (HSK) High Security Cylinders.
- INTERCHANGEABLE CORE (IC) Interchangeable Core locks will accept compatible 6 or 7 pin cores with BEST, FALCON and ARROW. Prefix “IC” before part number. Available combinated or uncombinated. Temporary construction cores available. Factory keying with control key and master key available.
- STRIKES ASA strike standard, “T” and full lip strike available on request.
- TACTILE & LEAD LINING available upon request.
Finishes
-
US26D Satin Chrome Plated -
US10B Dark Bronze
Templates
Installation Instructions
Part Numbers
Catalog Page
INSTALLATION CHALLENGE LEVEL
Challenging
Recommended for Experienced or Professional Installers.
Related Items
PDQ Extremely Heavy Duty Cylindrical Lock - XGT115 Storeroom
$179.50
US made, this line of grade 1 door locks gives you the best in security, durability, and cost. The XGT is able to withstand over 3,000 in. lbs. of torque resistance on its lever trim.
The XGT115 is a Storeroom function lock, where the latch bolt is operated by a key outside and the lever from the inside. The outside lever is rigid.
- Latchbolt operated by inside lever or key in outside lever
- Outside lever always fixed
We also offer the XGT Series Cylindrical Lock in several other functions - Entrance/Office, Privacy, Classroom and Passage. Compare Functions.
Features
- ANSI Grade 1 Extremely Heavy Duty cylindrical door lock
- Exceeds 3,000 in lbs. of torque resistance
- High Strength stainless steel investment cast spindle. Heavy gauge steel mounting plates.
- Door Situation: Fits left, right wood/metal swing doors
- Architectural Finish
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
Specs
- FOR DOORS: 1-3/4" to 2-1/4" thick. Factory adjusted for 1-3/4"
- DOOR PREP: Fits standard 161 door prep. Through-door thru-bolting.
- BACKSET: 2-3/4" only. Guarded
- FRONT: 2-1/4" x 1-1/8". Beveled 1/8" on 2"
- STRIKE: 4-7/8" x 1-1/4"(ASA).
- LATCHBOLT: 9/16" Throw. Adjustable front for flat or beveled doors.
- HAND: Non-handed.
- TRIM: Zinc diecast levers/wrought brass rose.
- KEYS: Two change keys per lock.
- Cylinder(s) included
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging
Recommended for Experienced or Professional Installers.
PDQ Extremely Heavy Duty Cylindrical Lock - XGT116 Entrance/Office
$179.50
US made, this line of grade 1 door locks gives you the best in security, durability, and cost. The XGT is able to withstand over 3,000 in. lbs. of torque resistance on its lever trim.
The XGT116 is an Entrance/Office function lock, where the door is unlocked by a key from the outside when the outer lever is locked by a turn-button on the inside lever. The inside lever is always unlocked.
- Latchbolt operated by lever from either side or key in outside lever
- Outside lever locked by push/turn button on inside
- When outside lever is locked by push button on inside – key from outside,
or rotating inside lever unlocks outside lever - When outside lever is locked by pushing and turning button on the inside,
key from outside or rotating inside lever retracts latch but does not unlock outside lever
We also offer the XGT Series Cylindrical Lock in several other functions - Privacy, Storeroom, Classroom and Passage. Compare Functions.
Features
- ANSI Grade 1 Extremely Heavy Duty cylindrical door lock
- Exceeds 3,000 in lbs. of torque resistance
- High Strength stainless steel investment cast spindle. Heavy gauge steel mounting plates.
- Door Situation: Fits left, right wood/metal swing doors
- Architectural Finish
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
Specs
- FOR DOORS: 1-3/4" to 2-1/4" thick. Factory adjusted for 1-3/4"
- DOOR PREP: Fits standard 161 door prep. Through-door thru-bolting.
- BACKSET: 2-3/4" only. Guarded
- FRONT: 2-1/4" x 1-1/8". Beveled 1/8" on 2"
- STRIKE: 4-7/8" x 1-1/4"(ASA).
- LATCHBOLT: 9/16" Throw. Adjustable front for flat or beveled doors.
- HAND: Non-handed.
- TRIM: Zinc diecast levers/wrought brass rose.
- KEYS: Two change keys per lock.
- Cylinder(s) included
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging
Recommended for Experienced or Professional Installers.
PDQ Extremely Heavy Duty Cylindrical Lock - XGT126 Passage
$142.80
US made, this line of grade 1 door locks gives you the best in security, durability, and cost. The XGT is able to withstand over 3,000 in. lbs. of torque resistance on its lever trim.
The XGT126 is a Passage function lock, where the latch bolt is operated by the lever from either side at all times. There is no locking function.
- Non keyed
- Latchbolt operated by lever from either side at all times
We also offer the XGT Series Cylindrical Lock in several other functions - Entrance/Office, Privacy, Storeroom and Classroom. Compare Functions.
Features
- ANSI Grade 1 Extremely Heavy Duty cylindrical door lock
- Exceeds 3,000 in lbs. of torque resistance
- High Strength stainless steel investment cast spindle. Heavy gauge steel mounting plates.
- Door Situation: Fits left, right wood/metal swing doors
- Architectural Finish
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
Specs
- FOR DOORS: 1-3/4" to 2-1/4" thick. Factory adjusted for 1-3/4"
- DOOR PREP: Fits standard 161 door prep. Through-door thru-bolting.
- BACKSET: 2-3/4" only. Guarded
- FRONT: 2-1/4" x 1-1/8". Beveled 1/8" on 2"
- STRIKE: 4-7/8" x 1-1/4"(ASA).
- LATCHBOLT: 9/16" Throw. Adjustable front for flat or beveled doors.
- HAND: Non-handed.
- TRIM: Zinc diecast levers/wrought brass rose.
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging
Recommended for Experienced or Professional Installers.
PDQ Extremely Heavy Duty Cylindrical Lock - XGT148 Classroom
$177.52
US made, this line of grade 1 door locks gives you the best in security, durability, and cost. The XGT is able to withstand over 3,000 in. lbs. of torque resistance on its lever trim.
The XGT148 is a Classroom function lock, where the latch bolt is operated by a lever on either side EXCEPT when the outside lever is locked from the outside by a key.
- Latchbolt operated by lever from either side
- Outside lever locked by key from outside
- Outside lever unlocked by key from outside
- Inside lever always operates latch
We also offer the XGT Series Cylindrical Lock in several other functions - Entrance/Office, Privacy, Storeroom and Passage. Compare Functions.
Features
- ANSI Grade 1 Extremely Heavy Duty cylindrical door lock
- Exceeds 3,000 in lbs. of torque resistance
- High Strength stainless steel investment cast spindle. Heavy gauge steel mounting plates.
- Door Situation: Fits left, right wood/metal swing doors
- Architectural Finish
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
Specs
- FOR DOORS: 1-3/4" to 2-1/4" thick. Factory adjusted for 1-3/4"
- DOOR PREP: Fits standard 161 door prep. Through-door thru-bolting.
- BACKSET: 2-3/4" only. Guarded
- FRONT: 2-1/4" x 1-1/8". Beveled 1/8" on 2"
- STRIKE: 4-7/8" x 1-1/4"(ASA).
- LATCHBOLT: 9/16" Throw. Adjustable front for flat or beveled doors.
- HAND: Non-handed.
- TRIM: Zinc diecast levers/wrought brass rose.
- KEYS: Two change keys per lock.
- Cylinder(s) included
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging
Recommended for Experienced or Professional Installers.
Company Info
Resources
Why Buy From Us?
Huge Inventory
Huge Inventory
No Hassle Returns
Satisfaction
Guaranteed
Guaranteed
News & Updates
Sign up to get the latest on sales, new releases and more …
