For Offices, Schools, Hospitals, Apartments, Hotel / Motel, Residential, Commercial and Public Buildings.
BHMA Certified Lifetime Warranty,GRADE 2
Conforms with ANSI A 156.2 Series 4000, Heavy Duty, Barrier Free
UL listed 3-hour rating, conforms to standards UL10C and UBC7-2-1997
Solid brass 6 pin “C” keyway cylinder, optional other keyways
Optional Interchangeable Core
Non-Clutch Mechanism
Optional thru-bolted installation
Individual spring on each side to prevent lever sag, maintain reliability and reduce maintenance
Optional Tactile and Lead Lining
Meets the Buy American Act
Features
APPLICATIONSFor offices, schools, hospitals, apartments, hotel / motel, residential, commercial and public buildings.
DOOR RANGES1 ⅜” to 2” thickness doors.
BACKSET2 ¾” Standard, 2 ⅜”, 3 ¾” and 5” optional.
LATCH BOLT½” Throw solid brass, reversible for RH or LH applications. UL Listed.
LATCH FACEPLATE2 ¼” x 1”, square corner packed with ⅛” plastic filler for 1 ⅛” width.
ANSI STANDARDSMeets or exceeds requirements of BHMA/ANSI A156.2 Series 4000, Grade 2 (FF-H 106C), 400,000 cycles.
EXPOSED TRIMWrought brass, bronze or stainless steel, levers are Zinc casting, plated to match trim finish.
KEYING6-pin “C” keyway cylinder, 2 keys per lock. Keying as per individual job requirement.
CYLINDER & KEYWAYS6 pin solid brass “C” keyway standard. Schlage E, Schlage C-K, Russwin D1-2-3-4, Corbin 59 / 60, Corbin-Russwin L4, Sargent LA-LB-LC, Falcon / Weiser E, Arrow A, Yale 8, Yale GA and Kwikset. Can also accept Medeco, Assa, Kaba and Cal-Royal (HSK) High Security Cylinders.
INTERCHANGEABLE CORE (IC)Interchangeable Core locks will accept compatible 6 or 7 pin cores with BEST, FALCON and ARROW. Prefix “IC” before part number. Available combinated or uncombinated. Temporary construction cores available. Factory keying with control key and master key available.
STRIKESASA strike standard, “T” and full lip strike available on request.
For Offices, Schools, Hospitals, Apartments, Hotel / Motel, Residential, Commercial and Public Buildings.
BHMA Certified Lifetime Warranty,GRADE 2
Conforms with ANSI A 156.2 Series 4000, Heavy Duty, Barrier Free
UL listed 3-hour rating, conforms to standards UL10C and UBC7-2-1997
Solid brass 6 pin “C” keyway cylinder, optional other keyways
Optional Interchangeable Core
Non-Clutch Mechanism
Optional thru-bolted installation
Individual spring on each side to prevent lever sag, maintain reliability and reduce maintenance
Optional Tactile and Lead Lining
Meets the Buy American Act
Features
APPLICATIONSFor offices, schools, hospitals, apartments, hotel / motel, residential, commercial and public buildings.
DOOR RANGES1 ⅜” to 2” thickness doors.
BACKSET2 ¾” Standard, 2 ⅜”, 3 ¾” and 5” optional.
LATCH BOLT½” Throw solid brass, reversible for RH or LH applications. UL Listed.
LATCH FACEPLATE2 ¼” x 1”, square corner packed with ⅛” plastic filler for 1 ⅛” width.
ANSI STANDARDSMeets or exceeds requirements of BHMA/ANSI A156.2 Series 4000, Grade 2 (FF-H 106C), 400,000 cycles.
EXPOSED TRIMWrought brass, bronze or stainless steel, levers are Zinc casting, plated to match trim finish.
KEYING6-pin “C” keyway cylinder, 2 keys per lock. Keying as per individual job requirement.
CYLINDER & KEYWAYS6 pin solid brass “C” keyway standard. Schlage E, Schlage C-K, Russwin D1-2-3-4, Corbin 59 / 60, Corbin-Russwin L4, Sargent LA-LB-LC, Falcon / Weiser E, Arrow A, Yale 8, Yale GA and Kwikset. Can also accept Medeco, Assa, Kaba and Cal-Royal (HSK) High Security Cylinders.
INTERCHANGEABLE CORE (IC)Interchangeable Core locks will accept compatible 6 or 7 pin cores with BEST, FALCON and ARROW. Prefix “IC” before part number. Available combinated or uncombinated. Temporary construction cores available. Factory keying with control key and master key available.
STRIKESASA strike standard, “T” and full lip strike available on request.
Cal-Royal Pioneer SL/CSL Series - AG00-Office/Entry Lock
$70.00
Grade 2 Locksets
For Offices, Schools, Hospitals, Apartments, Hotel / Motel, Residential, Commercial and Public Buildings.
BHMA Certified Lifetime Warranty,GRADE 2
Conforms with ANSI A 156.2 Series 4000, Heavy Duty, Barrier Free
UL listed 3-hour rating, conforms to standards UL10C and UBC7-2-1997
Solid brass 6 pin “C” keyway cylinder, optional other keyways
Optional Interchangeable Core
Optional Clutch System (CSL Series), free turning handle to deter breaking of the handle
Optional thru bolt installation
Individual spring on each side to prevent lever sag, maintain reliability and reduce maintenance
Optional Tactile and Lead Lining
Hurricane Approved Hardware. Florida Building Code FL13922
Meets the Buy American Act
Features
APPLICATIONSFor offices, schools, hospitals, apartments, hotel / motel, residential, commercial and public buildings.
DOOR RANGES1 ⅜” to 1 ¾” thickness doors.
BACKSET2 ¾” Standard, 2 ⅜”, 3 ¾” and 5” optional.
LATCH BOLT½” Throw solid brass, reversible for RH or LH applications. UL Listed.
LATCH FACEPLATE2 ¼” x 1 ⅛”, adjustable for flat or beveled doors ⅛” in 2”, for 2 ¾” backset. Optional 2 ¼” x 1” for 2 ⅜” backset.
ANSI STANDARDSMeets or exceeds requirements of BHMA / ANSI A156.2 Series 4000, Grade 2 (FF-H 106C), 400,000 cycles.
EXPOSED TRIMWrought brass, bronze or stainless steel, levers are Zinc casting, plated to match trim finish.
KEYING6-pin “C” keyway cylinder, 2 keys per lock. Keying as per individual job requirement.
CYLINDER & KEYWAYS6 pin solid brass “C” keyway standard. Schlage E, Schlage C-K, Russwin D1-2-3-4, Corbin 59 / 60, Corbin-Russwin L4, Sargent LA-LB-LC, Falcon / Weiser E, Arrow A, Yale 8, Yale GA and Kwikset. Can also accept Medeco, Assa, Kaba and Cal-Royal (HSK) High Security Cylinders.
CLUTCHClutch available on all keyed locks and privacy functions. Prefix“C” before part number.
INTERCHANGEABLE COREInterchangeable Core locks will accept compatible 6 or 7 pin cores with BEST, FALCON and ARROW. Prefix “IC” before part number. Available combinated or uncombinated. Temporary construction cores available. Factory keying with control key and master key available.
STRIKESASA strike standard, “T” and full lip strike available on request.
Cal-Royal Pioneer SL/CSL Series - RL00 Office / Entry Lock
$70.00
Grade 2 Locksets
For Offices, Schools, Hospitals, Apartments, Hotel / Motel, Residential, Commercial and Public Buildings.
BHMA Certified Lifetime Warranty,GRADE 2
Conforms with ANSI A 156.2 Series 4000, Heavy Duty, Barrier Free
UL listed 3-hour rating, conforms to standards UL10C and UBC7-2-1997
Solid brass 6 pin “C” keyway cylinder, optional other keyways
Optional Interchangeable Core
Optional Clutch System (CSL Series), free turning handle to deter breaking of the handle
Optional thru bolt installation
Individual spring on each side to prevent lever sag, maintain reliability and reduce maintenance
Optional Tactile and Lead Lining
Hurricane Approved Hardware. Florida Building Code FL13922
Meets the Buy American Act
Features
APPLICATIONSFor offices, schools, hospitals, apartments, hotel / motel, residential, commercial and public buildings.
DOOR RANGES1 ⅜” to 1 ¾” thickness doors.
BACKSET2 ¾” Standard, 2 ⅜”, 3 ¾” and 5” optional.
LATCH BOLT½” Throw solid brass, reversible for RH or LH applications. UL Listed.
LATCH FACEPLATE2 ¼” x 1 ⅛”, adjustable for flat or beveled doors ⅛” in 2”, for 2 ¾” backset. Optional 2 ¼” x 1” for 2 ⅜” backset.
ANSI STANDARDSMeets or exceeds requirements of BHMA / ANSI A156.2 Series 4000, Grade 2 (FF-H 106C), 400,000 cycles.
EXPOSED TRIMWrought brass, bronze or stainless steel, levers are Zinc casting, plated to match trim finish.
KEYING6-pin “C” keyway cylinder, 2 keys per lock. Keying as per individual job requirement.
CYLINDER & KEYWAYS6 pin solid brass “C” keyway standard. Schlage E, Schlage C-K, Russwin D1-2-3-4, Corbin 59 / 60, Corbin-Russwin L4, Sargent LA-LB-LC, Falcon / Weiser E, Arrow A, Yale 8, Yale GA and Kwikset. Can also accept Medeco, Assa, Kaba and Cal-Royal (HSK) High Security Cylinders.
CLUTCHClutch available on all keyed locks and privacy functions. Prefix“C” before part number.
INTERCHANGEABLE COREInterchangeable Core locks will accept compatible 6 or 7 pin cores with BEST, FALCON and ARROW. Prefix “IC” before part number. Available combinated or uncombinated. Temporary construction cores available. Factory keying with control key and master key available.
STRIKESASA strike standard, “T” and full lip strike available on request.
Cal-Royal Pioneer SL/CSL Series - SL00-Office / Entry Lock
$70.00
Grade 2 Locksets
For Offices, Schools, Hospitals, Apartments, Hotel / Motel, Residential, Commercial and Public Buildings.
BHMA Certified Lifetime Warranty,GRADE 2
Conforms with ANSI A 156.2 Series 4000, Heavy Duty, Barrier Free
UL listed 3-hour rating, conforms to standards UL10C and UBC7-2-1997
Solid brass 6 pin “C” keyway cylinder, optional other keyways
Optional Interchangeable Core
Optional Clutch System (CSL Series), free turning handle to deter breaking of the handle
Optional thru bolt installation
Individual spring on each side to prevent lever sag, maintain reliability and reduce maintenance
Optional Tactile and Lead Lining
Hurricane Approved Hardware. Florida Building Code FL13922
Meets the Buy American Act
Features
APPLICATIONSFor offices, schools, hospitals, apartments, hotel / motel, residential, commercial and public buildings.
DOOR RANGES1 ⅜” to 1 ¾” thickness doors.
BACKSET2 ¾” Standard, 2 ⅜”, 3 ¾” and 5” optional.
LATCH BOLT½” Throw solid brass, reversible for RH or LH applications. UL Listed.
LATCH FACEPLATE2 ¼” x 1 ⅛”, adjustable for flat or beveled doors ⅛” in 2”, for 2 ¾” backset. Optional 2 ¼” x 1” for 2 ⅜” backset.
ANSI STANDARDSMeets or exceeds requirements of BHMA / ANSI A156.2 Series 4000, Grade 2 (FF-H 106C), 400,000 cycles.
EXPOSED TRIMWrought brass, bronze or stainless steel, levers are Zinc casting, plated to match trim finish.
KEYING6-pin “C” keyway cylinder, 2 keys per lock. Keying as per individual job requirement.
CYLINDER & KEYWAYS6 pin solid brass “C” keyway standard. Schlage E, Schlage C-K, Russwin D1-2-3-4, Corbin 59 / 60, Corbin-Russwin L4, Sargent LA-LB-LC, Falcon / Weiser E, Arrow A, Yale 8, Yale GA and Kwikset. Can also accept Medeco, Assa, Kaba and Cal-Royal (HSK) High Security Cylinders.
CLUTCHClutch available on all keyed locks and privacy functions. Prefix“C” before part number.
INTERCHANGEABLE COREInterchangeable Core locks will accept compatible 6 or 7 pin cores with BEST, FALCON and ARROW. Prefix “IC” before part number. Available combinated or uncombinated. Temporary construction cores available. Factory keying with control key and master key available.
STRIKESASA strike standard, “T” and full lip strike available on request.
PDQ SD series grade 2 lever set for commercial doors features unique through bolt installation for added security and durability and is UL listed A label for single swing doors.
The SD115 is a Storeroom function lock, where the latch bolt is operated by a key outside and the lever from the inside. The outside lever is rigid.
Latch bolt operated from outside by key, inside by lever
Outside lever always fixed
Inside lever always free
Deadlocking (guarded) latch bolt all times
We also offer the SD Series Cylindrical Lock in several other functions - Entrance/Office, Privacy, and Passage. Compare Functions.
Features
Listed by UL 10C / UBC 7-2 (1997) positive pressure, for single doors up to 4’0” x 8’0”.
Certified to ANSI/BHMA A156.2–1996, Series 4000, Grade 2.
Assembled in USA, meeting the requirements of the Buy American Act
Lifetime Manufacturer's Limited Warranty
Cylinder(s) included
Specs
FOR DOORS: 1-3/8" to 1-3/4" thick.
DOOR PREP: Fits standard 161 door prep (2 1/8" hole x 2 3/4" backset). Through-door through-bolting. Through-bolts removable if desired.
BACKSET: 2-3/4" is standard.
FRONT: 2-1/4" x 1-1/8" for 2-3/4" backset. Stainless steel or wrought brass.
STRIKE: 4-7/8" x 1-1/4" (ASA).
LATCHBOLT: 1/2" throw. Adjustable front for flat or beveled doors.
HAND: Non-handed.
TRIM: Zinc diecast levers/wrought brass rose.
KEYS: Two change keys per lock.
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging Recommended for Experienced or Professional Installers.
PDQ SD series grade 2 lever set for commercial doors features unique through bolt installation for added security and durability and is UL listed A label for single swing doors.
The SD116 is an Entrance/Office function lock, where the door is unlocked by a key from the outside when the outer lever is locked by a turn-button on the inside lever. The inside lever is always unlocked.
Latch bolt operated by lever from either side or key in outside lever
Outside lever locked by push/turn button on inside
When outside lever is locked by push button on inside – key from outside, or rotating inside lever unlocks outside lever
When outside lever is locked by pushing and turning the button on the inside, key from outside or rotating inside lever retracts latch but does not unlock outside lever
Deadlocking (guarded) latch bolt
We also offer the SD Series Cylindrical Lock in several other functions - Privacy, Storeroom,and Passage. Compare Functions.
Features
Listed by UL 10C / UBC 7-2 (1997) positive pressure, for single doors up to 4’0” x 8’0”.
Certified to ANSI/BHMA A156.2–1996, Series 4000, Grade 2.
Assembled in USA, meeting the requirements of the Buy American Act
Lifetime Manufacturer's Limited Warranty
Cylinder included
Specs
FOR DOORS: 1-3/8" to 1-3/4" thick.
DOOR PREP: Fits standard 161 door prep (2 1/8" hole x 2 3/4" backset). Through-door through-bolting. Through-bolts removable if desired.
BACKSET: 2-3/4" is standard.
FRONT: 2-1/4" x 1-1/8" for 2-3/4" backset. Stainless steel or wrought brass.
STRIKE: 4-7/8" x 1-1/4" (ASA).
LATCHBOLT: 1/2" throw. Adjustable front for flat or beveled doors.
HAND: Non-handed.
TRIM: Zinc diecast levers/wrought brass rose.
KEYS: Two change keys per lock.
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging Recommended for Experienced or Professional Installers.
PDQ SD series grade 2 lever set for commercial doors features unique through bolt installation for added security and durability and is UL listed A label for single swing doors.
The SD126 is a Passage function lock, where the latch bolt is operated by the lever from either side at all times. There is no locking function.
Non keyed
Latch bolt operated by lever from either side at all times
We also offer the SD Series Cylindrical Lock in several other functions - Entrance/Office, Privacy, and Storeroom. Compare Functions.
Features
Listed by UL 10C / UBC 7-2 (1997) positive pressure, for single doors up to 4’0” x 8’0”.
Certified to ANSI/BHMA A156.2–1996, Series 4000, Grade 2.
Assembled in USA, meeting the requirements of the Buy American Act
Lifetime Manufacturer's Limited Warranty
Specs
FOR DOORS: 1-3/8" to 1-3/4" thick.
DOOR PREP: Fits standard 161 door prep (2 1/8" hole x 2 3/4" backset). Through-door through-bolting. Through-bolts removable if desired.
BACKSET: 2-3/4" is standard.
FRONT: 2-1/4" x 1-1/8" for 2-3/4" backset. Stainless steel or wrought brass.
STRIKE: 4-7/8" x 1-1/4" (ASA).
LATCHBOLT: 1/2" throw. Adjustable front for flat or beveled doors.
HAND: Non-handed.
TRIM: Zinc diecast levers/wrought brass rose.
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging Recommended for Experienced or Professional Installers.
PDQ SD series grade 2 lever set for commercial doors features unique through bolt installation for added security and durability and is UL listed A label for single swing doors.
The SD176 is a Privacy function lock which features push-button locking. The lock can be opened from the outside with an emergency release. The inside push button can be released by turning the inside lever.
Non keyed
Latch bolt operated by lever from either side or emergency release in outside lever
Outside lever locked by push button on inside
Outside lever unlocked by emergency release from outside, rotating inside lever, or closing door
We also offer the SD Series Cylindrical Lock in several other functions - Entrance/Office, Storeroom and Passage. Compare Functions.
Features
Listed by UL 10C / UBC 7-2 (1997) positive pressure, for single doors up to 4’0” x 8’0”.
Certified to ANSI/BHMA A156.2–1996, Series 4000, Grade 2.
Assembled in USA, meeting the requirements of the Buy American Act
Lifetime Manufacturer's Limited Warranty
Cylinder(s) included
Specs
FOR DOORS: 1-3/8" to 1-3/4" thick.
DOOR PREP: Fits standard 161 door prep (2 1/8" hole x 2 3/4" backset). Through-door through-bolting. Through-bolts removable if desired.
BACKSET: 2-3/4" is standard.
FRONT: 2-1/4" x 1-1/8" for 2-3/4" backset. Stainless steel or wrought brass.
STRIKE: 4-7/8" x 1-1/4" (ASA).
LATCHBOLT: 1/2" throw. Adjustable front for flat or beveled doors.
HAND: Non-handed.
TRIM: Zinc diecast levers/wrought brass rose.
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging Recommended for Experienced or Professional Installers.
PDQ Extremely Heavy Duty Cylindrical Lock - XGT115 Storeroom
$179.50
US made, this line of grade 1 door locks gives you the best in security, durability, and cost. The XGT is able to withstand over 3,000 in. lbs. of torque resistance on its lever trim.
The XGT115 is a Storeroom function lock, where the latch bolt is operated by a key outside and the lever from the inside. The outside lever is rigid.
Latchbolt operated by inside lever or key in outside lever
Outside lever always fixed
We also offer the XGT Series Cylindrical Lock in several other functions - Entrance/Office, Privacy, Classroom and Passage. Compare Functions.
Features
ANSI Grade 1 Extremely Heavy Duty cylindrical door lock
Exceeds 3,000 in lbs. of torque resistance
High Strength stainless steel investment cast spindle. Heavy gauge steel mounting plates.
Door Situation: Fits left, right wood/metal swing doors
Architectural Finish
Assembled in USA, meeting the requirements of the Buy American Act
Lifetime Manufacturer's Limited Warranty
Specs
FOR DOORS: 1-3/4" to 2-1/4" thick. Factory adjusted for 1-3/4"
DOOR PREP: Fits standard 161 door prep. Through-door thru-bolting.
BACKSET: 2-3/4" only. Guarded
FRONT: 2-1/4" x 1-1/8". Beveled 1/8" on 2"
STRIKE: 4-7/8" x 1-1/4"(ASA).
LATCHBOLT: 9/16" Throw. Adjustable front for flat or beveled doors.
HAND: Non-handed.
TRIM: Zinc diecast levers/wrought brass rose.
KEYS: Two change keys per lock.
Cylinder(s) included
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging Recommended for Experienced or Professional Installers.
PDQ Extremely Heavy Duty Cylindrical Lock - XGT116 Entrance/Office
$179.50
US made, this line of grade 1 door locks gives you the best in security, durability, and cost. The XGT is able to withstand over 3,000 in. lbs. of torque resistance on its lever trim.
The XGT116 is an Entrance/Office function lock, where the door is unlocked by a key from the outside when the outer lever is locked by a turn-button on the inside lever. The inside lever is always unlocked.
Latchbolt operated by lever from either side or key in outside lever
Outside lever locked by push/turn button on inside
When outside lever is locked by push button on inside – key from outside, or rotating inside lever unlocks outside lever
When outside lever is locked by pushing and turning button on the inside, key from outside or rotating inside lever retracts latch but does not unlock outside lever
We also offer the XGT Series Cylindrical Lock in several other functions - Privacy, Storeroom, Classroom and Passage. Compare Functions.
Features
ANSI Grade 1 Extremely Heavy Duty cylindrical door lock
Exceeds 3,000 in lbs. of torque resistance
High Strength stainless steel investment cast spindle. Heavy gauge steel mounting plates.
Door Situation: Fits left, right wood/metal swing doors
Architectural Finish
Assembled in USA, meeting the requirements of the Buy American Act
Lifetime Manufacturer's Limited Warranty
Specs
FOR DOORS: 1-3/4" to 2-1/4" thick. Factory adjusted for 1-3/4"
DOOR PREP: Fits standard 161 door prep. Through-door thru-bolting.
BACKSET: 2-3/4" only. Guarded
FRONT: 2-1/4" x 1-1/8". Beveled 1/8" on 2"
STRIKE: 4-7/8" x 1-1/4"(ASA).
LATCHBOLT: 9/16" Throw. Adjustable front for flat or beveled doors.
HAND: Non-handed.
TRIM: Zinc diecast levers/wrought brass rose.
KEYS: Two change keys per lock.
Cylinder(s) included
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging Recommended for Experienced or Professional Installers.
PDQ Extremely Heavy Duty Cylindrical Lock - XGT126 Passage
$142.80
US made, this line of grade 1 door locks gives you the best in security, durability, and cost. The XGT is able to withstand over 3,000 in. lbs. of torque resistance on its lever trim.
The XGT126 is a Passage function lock, where the latch bolt is operated by the lever from either side at all times. There is no locking function.
Non keyed
Latchbolt operated by lever from either side at all times
We also offer the XGT Series Cylindrical Lock in several other functions - Entrance/Office, Privacy, Storeroom and Classroom. Compare Functions.
Features
ANSI Grade 1 Extremely Heavy Duty cylindrical door lock
Exceeds 3,000 in lbs. of torque resistance
High Strength stainless steel investment cast spindle. Heavy gauge steel mounting plates.
Door Situation: Fits left, right wood/metal swing doors
Architectural Finish
Assembled in USA, meeting the requirements of the Buy American Act
Lifetime Manufacturer's Limited Warranty
Specs
FOR DOORS: 1-3/4" to 2-1/4" thick. Factory adjusted for 1-3/4"
DOOR PREP: Fits standard 161 door prep. Through-door thru-bolting.
BACKSET: 2-3/4" only. Guarded
FRONT: 2-1/4" x 1-1/8". Beveled 1/8" on 2"
STRIKE: 4-7/8" x 1-1/4"(ASA).
LATCHBOLT: 9/16" Throw. Adjustable front for flat or beveled doors.
HAND: Non-handed.
TRIM: Zinc diecast levers/wrought brass rose.
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging Recommended for Experienced or Professional Installers.
PDQ Extremely Heavy Duty Cylindrical Lock - XGT135 Intruder Classroom
$255.00
Extremely Heavy Duty Cylindrical Lock - XGT135 Intruder Classroom
US made, this line of grade 1 door locks gives you the best in security, durability, and cost. The XGT is able to withstand over 3,000 in. lbs. of torque resistance on its lever trim.
The XGT135 is a Classroom function lock, where the latch bolt is operated by a lever on either side EXCEPT when the outside lever is locked from the outside by a key.
Latchbolt operated by lever from either side
Outside lever locked by key from outside
Outside lever unlocked by key from outside
Inside lever always operates latch
We also offer the XGT Series Cylindrical Lock in several other functions - Entrance/Office, Privacy, Storeroom and Passage. Compare Functions.
Features
ANSI Grade 1 Extremely Heavy Duty cylindrical door lock
Exceeds 3,000 in lbs. of torque resistance
High Strength stainless steel investment cast spindle. Heavy gauge steel mounting plates.
Door Situation: Fits left, right wood/metal swing doors
Architectural Finish
Assembled in USA, meeting the requirements of the Buy American Act
Lifetime Manufacturer's Limited Warranty
Specs
FOR DOORS: 1-3/4" to 2-1/4" thick. Factory adjusted for 1-3/4"
DOOR PREP: Fits standard 161 door prep. Through-door thru-bolting.
BACKSET: 2-3/4" only. Guarded
FRONT: 2-1/4" x 1-1/8". Beveled 1/8" on 2"
STRIKE: 4-7/8" x 1-1/4"(ASA).
LATCHBOLT: 9/16" Throw. Adjustable front for flat or beveled doors.
HAND: Non-handed.
TRIM: Zinc diecast levers/wrought brass rose.
KEYS: Two change keys per lock.
Cylinder(s) included
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging Recommended for Experienced or Professional Installers.
PDQ Extremely Heavy Duty Cylindrical Lock - XGT148 Classroom
$177.52
US made, this line of grade 1 door locks gives you the best in security, durability, and cost. The XGT is able to withstand over 3,000 in. lbs. of torque resistance on its lever trim.
The XGT148 is a Classroom function lock, where the latch bolt is operated by a lever on either side EXCEPT when the outside lever is locked from the outside by a key.
Latchbolt operated by lever from either side
Outside lever locked by key from outside
Outside lever unlocked by key from outside
Inside lever always operates latch
We also offer the XGT Series Cylindrical Lock in several other functions - Entrance/Office, Privacy, Storeroom and Passage. Compare Functions.
Features
ANSI Grade 1 Extremely Heavy Duty cylindrical door lock
Exceeds 3,000 in lbs. of torque resistance
High Strength stainless steel investment cast spindle. Heavy gauge steel mounting plates.
Door Situation: Fits left, right wood/metal swing doors
Architectural Finish
Assembled in USA, meeting the requirements of the Buy American Act
Lifetime Manufacturer's Limited Warranty
Specs
FOR DOORS: 1-3/4" to 2-1/4" thick. Factory adjusted for 1-3/4"
DOOR PREP: Fits standard 161 door prep. Through-door thru-bolting.
BACKSET: 2-3/4" only. Guarded
FRONT: 2-1/4" x 1-1/8". Beveled 1/8" on 2"
STRIKE: 4-7/8" x 1-1/4"(ASA).
LATCHBOLT: 9/16" Throw. Adjustable front for flat or beveled doors.
HAND: Non-handed.
TRIM: Zinc diecast levers/wrought brass rose.
KEYS: Two change keys per lock.
Cylinder(s) included
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging Recommended for Experienced or Professional Installers.
PDQ Extremely Heavy Duty Cylindrical Lock - XGT176 Privacy
$161.00
PDQ XGT Series Heavy Duty Cylindrical Lock
US made, this line of grade 1 door locks gives you the best in security, durability, and cost. The XGT is able to withstand over 3,000 in. lbs. of torque resistance on its lever trim.
The XGT176 is a Privacy function lock which features push-button locking. The lock can be opened from the outside with an emergency release. The inside push button can be released by turning the inside lever.
Non keyed
Latchbolt operated by lever from either side or emergency release in outside lever
Outside lever locked by push button on inside
Outside lever unlocked by emergency release from outside, rotating inside lever, or closing door
We also offer the XGT Series Cylindrical Lock in several other functions - Entrance/Office, Storeroom, Classroom and Passage. Compare Functions.
Features
ANSI Grade 1 Extremely Heavy Duty cylindrical door lock
Exceeds 3,000 in lbs. of torque resistance
High Strength stainless steel investment cast spindle. Heavy gauge steel mounting plates.
Door Situation: Fits left, right wood/metal swing doors
Architectural Finish
Assembled in USA, meeting the requirements of the Buy American Act
Lifetime Manufacturer's Limited Warranty
Specs
FOR DOORS: 1-3/4" to 2-1/4" thick. Factory adjusted for 1-3/4"
DOOR PREP: Fits standard 161 door prep. Through-door thru-bolting.
BACKSET: 2-3/4" only. Guarded
FRONT: 2-1/4" x 1-1/8". Beveled 1/8" on 2"
STRIKE: 4-7/8" x 1-1/4"(ASA).
LATCHBOLT: 9/16" Throw. Adjustable front for flat or beveled doors.
HAND: Non-handed.
TRIM: Zinc diecast levers/wrought brass rose.
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging Recommended for Experienced or Professional Installers.