Cal-Royal EXCR929M Smart Digital Exit Device Trim

$612.00

Category: Exit Device Trim, Exit Devices, Panic Bar, Rim Exit Devices, smart lock, Wifi

The Cal-Royal EXCR929M Smart Digital Exit Device Trim is a residential/commercial ANSI Grade 2 smart digital exit device trim with clutch mechanism and no cylinder override. It is Apple and Android compatible, works with the TTLock app, and can be used as a stand-alone or integrated access control system. Features include close proximity smartphone lock/unlock, Wi-Fi lock/unlock with optional gateway connectivity, proximity RFID card access, master code/passcode, digital touchscreen, timestamped access log audit trail, anti-peeping function, non-handed design, scheduled passage mode, low battery warning, optional auto re-locking, restricted access rights, one-time user PIN code, 1 admin and 1 secondary admin level, 250 passcode users per lock, 1000 card users, water-resistant construction, and 3 years warranty.

PACKAGING: Includes 2 RFID Cards, 4 AA Batteries and Battery Pack.
** Panic Rim Exit Devices are not included . It must be purchased separately.

Features

Apple and Android Compatible – iPhones with iOS 13.0 and above. Android 5.0 or above with Smart Phone connectivity capability.
T T LOCK APP – lock can be managed / synced using the app.
Admin Phone – a lock can only have one Administrator Phone at a time. Only smartphones are used as an Administrator. One admin phone can add a second level admin. It can manage up to 250 locks.
Access Log (Audit Trail) – 2000 audit trail entries.
Gateway Connectivity – optional gateway device to connect compatible locks to the internet, so users can manage locks remotely.
Keypad Anti-Tamper Lockout – if an invalid code is entered 5 times consecutively, the unit will alarm and stay idle for 1 minute.
Low Battery Warning
Optional Auto Re-locking – relock from 5-60 seconds or more.
Passage Mode – keeps the smart lock unlocked for an extended period. This feature can be controlled via Smart Phone connectivity when you're nearby or through Wi-Fi when you're remote, all through the app.
Pre-Entry Codes (Anti-Peeping) – EXCR929M random pre-entry code adds security by displaying random digits before / after entering your code, preventing it from being identified through fingerprints on the touchscreen.
Restricted Access Right – EXCR929M can be programmed to specify the access period or intervals of users.
One-Time User PIN Code for EXCR929M
Factory Setting Construction Passcode - pre-set, generic code to access or reset the device, which can also be utilized during construction. Additionally, a Construction Engineering Card is available for use in construction.

Specifications

APPLICATIONS
For offices, apartments, hotel / motels, residential, and commercial.

DOOR THICKNESS
1 ½” (38mm) - 2 ³/8" (60.3mm) standard

BACKSET
2 ¾” (70mm) standard

ANSI STANDARDS
Meets ANSI / BHMA A156.2 Series 4000, Grade 2 strength and operational requirements.

CLUTCH
Clutch technology allows turning of lever without retracting latch. Thus prolonging the life of the lock by reducing stress on the spindle and other parts.

LOW BATTERY INDICATOR
The blinking sound action signals internal 4 AA alkaline batteries are low. Battery percentage is also displayed in the app.

POWER SOURCE
Powered by 4 AA Alkaline batteries (Included in the box)

EMERGENCY POWER BACK-UP
Type-C USB emergency cable

WEATHER RESISTANT
All models are weather resistant for temperature operating ranges of -4○F ~ 149○F (-20○C ~ +65○C). For outdoor use of the Front Panel, the back panel should not be exposed to outdoor conditions and it is recommended to use an outdoor lock cover protector. Optional rubber seal for enhanced weather resistance in outdoor use. (Included in the box)

COMPATIBILITY
Compatible with 2200, 6600, 5000, T5000, 7700, and 9800 Series RIM Type Exit Devices Only

Functions

Latch bolt operated by lever from outside & pushbar from inside. Outside would need to enter pre-programmed code on the touch screen in order to retract the latch upon turning lever. Key, RFID Card, Smart PhoneApp overrides the use of the touch screen.

Downloads

Related Items

+ Quick Shop

Cal-Royal 5000 & F5000 Fire Rated Series Rim Exit Device

from $149.00

Cal-Royal 5000 & F5000 Fire Rated Series Rim Exit Device

$149.00

Qty

RIM TYPE EXIT DEVICES. Uncompromising security and safety in single and double fire exit doors.

5000 & F5000 SERIES
- ANSI A156.3, GRADE 1 Heavy Duty Rim Exit Device
- UL Listed for Panic and UL10C, UBC 7-2-1997 codes.
- UL Listed for Fire Exit Hardware. 3 hours.
- (A) label rating on pairs of doors up to 8’0″ x 8’0″ swinging in same or opposite directions.
- Chassis mounted unit construction.
- Available in standard functions. Lever and knob trims have an optional clutch freewheeling mechanism. Rose covers 161 cut out.

For Doors - 1 ¾" thick standard. 3 ¾" minimum stile width for single or double door application using standard 938 strike and pull or lever trims.
Chassis - Steel (Panic & Fire Grade)
Cover - Covers stock hollow metal doors with 161 cut out
Mounting - Furnished standard with wood and machine screws. Available with thru-bolts on request. Thru bolts are standard packaging on fire-rated devices.
End Cap - Steel construction
Hand - Non-Handed, center hub.
Latch Bolt - Stainless steel ¾" throw
Spring - Steel throughout
ANSI Standard - A156.3, Grade 1
Rail Assembly - Heavy gauge steel, painted.
Strike - 938 packed standard.
Dogging Feature - Allen-type key furnished standard on non-fire labeled devices.
Mullion - Available.
UL and ULC Listed - 5000 Series for panic. F5000 Series for fire exit hardware for all types of 3' x 7' single doors and 6' x 7' double doors for up to 3-hour fire labeled installations, conforms to standards UL10C and UBC 7-2-1997 codes.
Finish - Aluminum (ALUM), Stainless Steel (US32D)
Anti-Microbial Coating - Available on US32D only. Use part # ANTB-EXIT

Suggested Architect’s Specifications

All exit devices shall be of touch bar design with smooth operation and be operative over ⅔ of the door’s clear opening width
All exit devices must be listed under “Panic Hardware” in the Accident Equipment List of Underwriters’ Laboratories, Inc. where labeled doors are used as exits, they must be equipped with labeled Fire Exit Hardware and UL10C, UBC 7-2-1997 codes
All exit devices shall be of chassis mounted unit construction

Dimensions

Minimum Stile Requirements

Template and Installation Instructions

View Catalog Page

INSTALLATION CHALLENGE LEVEL

wrench wrench Challenging
Recommended for Experienced Installers, but not rocket science.

View full product details »

+ Quick Shop

Cal-Royal 5000V & F5000V Series

from $163.00

Cal-Royal 5000V & F5000V Series

$163.00

VERTICAL ROD TYPE EXIT DEVICES. Uncompromising security and safety in single and double fire exit doors

ANSI A156.3, GRADE 1 Heavy Duty exit device in surface vertical rod and rim designs
Lifetime Warranty
UL listed for panic and ULC10C, UBC 7-2-1997 Codes
UL Listed for Fire Exit Hardware. 3 Hours
Chassis mounted unit construction
Optional Mullion
Available in standard functions. Lever and knob trims have an optional clutch freewheeling mechanism
Architectural plated finishes available

For Doors - 1-3/4" thick standard. 3-3/4" minimum stile width for single door application. 3-1/2" minimum stile width required for double door application. Lever and knob trims available
Chassis - Steel (Panic Grade), steel (Fire Grade)
Cover - Non-ferrous plated material. Covers stock hollow metal doors with 161 cutout
Mounting - Furnished standard with wood and machine screws. Thru-bolts are standard packaging for fire-rated devices
End Cap - Steel Construction
Hand - Non-Handed
Latch Bolt, Spring - Stainless Steel
ANSI Standard - A156.3, Grade 1
Rail Assembly - Heavy gauge steel, painted
Strike - See Strike page.
Dogging Feature - 5mm Allen-type key furnished standard on non-fire labeled devices
UL and ULC Listed - 5000V Series for Panic. F5000V Series for fire exit hardware for all types of 6' x 7' double doors for up to 3-hour fire labeled installations, conforms to standards UL10C and UBC 7-2-1997 codes
Finish - Aluminum, US32D (Stainless Steel)
Door Size - 5000V3684 and F5000V3684 for 36" x 84" doors

Suggested Architect’s Specifications

All exit devices shall be of touch bar design with smooth operation and be operative over ⅔ of the door’s clear opening width
All exit devices must be listed under “Panic Hardware” in the Accident Equipment List of Underwriters’ Laboratories, Inc. Where labeled doors are used as exits, they must be equipped with labeled Fire Exit
Hardware and UL10C, UBC 7-2-1997 codes
All exit devices shall be of chassis mounted unit construction