ASI - 3801-41 Matte Black Snap Flange Grab Bars – Straight
CALL FOR PRICING
ASI - 3801-41 Series Matte Black Snap Flange Grab Bars – Straight
ASI’s Matte Black Collection provides a chic alternative for modern washrooms. Carefully curated to be versatile and powder coated for added durability, these accessories are ready to make a statement in any setting. The boldness of black creates an air of sophistication, while the subtlety of the matte finish exudes warmth.
Features include cover that snaps over mounting flange dimples to conceal screws and concealed mounting flange of 3 1/8″ (79 mm) O.D. diameter with 2 screw holes and 3 locking dimples; 1/8″ (3 mm) thick, type 304 stainless steel. Cover is 22 gauge type 304 stainless steel with a powder coated matte black finish and 3 3/16″ (81 mm) diameter.
1-1/2″ DIA (38 mm) Straight Grab Bars With Matte Black Powder Coated Finish
Features
- Straight grab bar
- Snap Flange – cover snaps over mounting flange to conceal screws
- Type 304 Stainless Steel – Matte Black Powder Coated
- Smooth surface
- Surface mounted
- 18 gauge tubing with 1-1/2″ Outside Diameter (38 mm)
- Available in 18″, 24″, 36″, 42″ and 48″ lengths
- 1-1/2″ (38 mm) wall clearance
Available Sizes
- 3801-18-41 – 18″ Length (457 mm)
- 3801-24-41 – 24″ Length (610 mm)
- 3801-36-41 – 36″ Length (914 mm)
- 3801-42-41 – 42″ Length (1067 mm)
- 3801-48-41 – 48″ Length (1219 mm)
Specifications
Series
3801-41 Series
Type
Straight Snap Flange Grab Bar
Available Lengths
18″ (457 mm), 24″ (610 mm), 36″ (914 mm), 42″ (1067 mm), 48″ (1219 mm)
Outside Diameter
1-1/2″ (38 mm)
Tubing
18 Gauge Type 304 Stainless Steel
Surface
Smooth
Mounting Flange
3-1/8″ (79 mm) O.D., 1/8″ (3 mm) thick Type 304 stainless steel with 2 screw holes and 3 locking dimples
Snap-On Cover
22 gauge Type 304 stainless steel, 3-3/16″ (81 mm) diameter
Wall Clearance
1-1/2″ (38 mm)
Mounting
Surface Mounted
Capacity
Designed to meet and exceed 2010 ADA Accessibility Standards and ANSI A117.1 requirements for a load in excess of 250 lbs (113.4 kg) when properly mounted
Finishes
- Matte Black Powder Coated Finish
Operation & Maintenance
All accessible Matte Black Powder Coated surfaces should be cleaned with a mild liquid soap only. The surfaces should then be wiped and dried.
In areas containing showers, the accessories must receive ventilation from the outside so that excess humidity can escape.
Do not use abrasive powders or scouring pads, water closet cleaners, ceramic tile cleaners, solutions containing more than 1% ammonia by volume, solutions containing acids or lye, or solutions containing enzymes.
Installation
Use grab bar as a template to mark mounting hole locations and pre-drill holes.
Install bar using two (2) #10 self-threading flat head or oval head screws (by others), or other suitable fastener system (by others), for each flange.
Appropriate anchoring and backing must be provided in accordance with local building codes or as specified on architectural plans prior to wall finishing.
For compliance with 2010 ADA Accessibility Standards, install unit so that the top of the grab bar is 33″ (840 mm) minimum Above Finished Floor (AFF) to 36″ (915 mm) maximum AFF.
Anchors are available from ASI and must be specified separately for each grab bar style scheduled.
Related Items
ASI - 20477-SM Roval™ Surface Mounted Toilet Seat Cover Dispenser
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
ASI - 20477-SM Roval™ Surface Mounted Toilet Seat Cover Dispenser
Dispenses 250 seat covers. Fabricated of 20 gauge type 304 stainless steel with a satin finish.
Covers are self-feeding until supply is depleted. Unit is manually reloaded with a full box through concealed opening in bottom on schedule determined by maintenance requirements.
Stainless Steel Construction
Our heavy-duty items are made of high-quality 304 stainless steel, which is tough, durable, stain-resistant and easy to clean.
Tumbler Locks
Our tumbler locks provide convenience and security with an elegant look.
Staked Piano Hinges
Our heavy-duty, staked piano hinges provide security and a neat appearance, and they stand up to heavy use.
Removable Waste Receptacle
Fully removable waste cans allow contents to be easily discarded for efficient ongoing maintenance and cleanliness.
Features
- Dispenses 250 seat covers
- 20 gauge type 304 stainless steel construction
- Satin finish
- Surface mounted
- Curved front adds strength and elegance
- Concealed, multi-staked piano hinge
- Covers are self-feeding until supply is depleted
- Concealed bottom opening allows manual reloading
Specifications
Model
20477-SM
Series
Roval™
Type
Surface Mounted Toilet Seat Cover Dispenser
Dimensions
15-3/4″ x 11″ x 2-3/8″ (400 x 280 x 60 mm)
Construction
20 gauge Type 304 Stainless Steel
Finish
Satin Finish
Mounting
Surface Mounted
Capacity
Dispenses 250 seat covers
Hinge
Concealed, Multi-Staked Piano Hinge
Finishes
- Satin Finish
Operation & Maintenance
Covers are self-feeding until supply is depleted. Unit is manually reloaded with a full box through concealed opening in bottom on schedule determined by maintenance requirements.
Regularly inspect and replenish the supply of toilet seat covers according to facility maintenance requirements.
Clean stainless steel surfaces regularly with a soft clean rag moistened with a mild detergent, followed by a water-moistened clean rag and then a dry rag.
Installation
Mount unit on wall or partition surface using two (2) #10 x 1-1/4″ [32] self-threading flat head screws (by others).
Mounting holes are accessible through the dispenser slot during installation and are concealed behind the dispenser box after the dispensing product is loaded for vandal-resistant installation.
For compliance with 2010 ADA Accessibility Standards, install unit so that centerline of dispenser slot is 48″ [1219] maximum Above Finished Floor (AFF) if clear floor access is provided.
Where only side reach over an obstruction is provided, such as over a vanity, centerline of dispenser slot should be 46″ [1168] maximum AFF.
ASI - 0740-Z Robe Hook (Single) – Surface Mounted, Chrome Plated Zamak
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
ASI - 0740-Z Robe Hook (Single) – Surface Mounted, Chrome Plated Zamak
Fabricated from rust resistant Zamak, with stainless steel wall bracket. One stainless steel hex socket set screw is provided along base of flange for anchoring to stainless steel wall bracket.
Features
- Single robe hook
- Fabricated from rust resistant Zamak
- Stainless steel wall bracket
- Stainless steel hex socket set screw provided along base of flange
- Chrome Plated
- Surface Mounted
Specifications
Model
0740-Z
Type
Robe Hook (Single)
Dimensions
2-1/8″ x 1-7/16″ x 2-1/8″ (54 x 37 x 54 mm)
Construction
Chrome Plated Zamac
Wall Bracket
Stainless Steel
Mounting
Surface Mounted
Finishes
- Chrome Plated
Operation & Maintenance
Washroom accessory products require regular surface cleaning. Clean with a soft clean rag moistened with a mild detergent, followed by a water-moistened clean rag and then a dry rag.
Installation
Wall bracket is surface mounted using #10 self-threading screws (supplied) through holes provided. Hook is secured to bracket by tightening stainless steel hex socket set screw.
Typical mounting suggestion is 66″ [1676] Above Finished Floor (AFF).
For compliance with 2010 ADA Accessibility Standards, unit should be installed so that top of hook is 54″ [1372] maximum AFF if clear floor side reach access is provided or 48″ [1219] maximum AFF if clear floor forward reach access is provided.
ASI - 0751-A Robe Hook (Heavy-Duty) – Surface Mounted (Exposed), Satin Chrome Plated Brass
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
ASI - 0751-A Robe Hook (Heavy-Duty) – Surface Mounted (Exposed), Satin Chrome Plated Brass
Fabricated of brass with a chrome finish. Exposed mounting.
Three (3) 7/32″ diameter (Ø5.6) countersunk holes provided for anchoring hook to wall on 2-3/4″ diameter (Ø70) flange. Hook is capable of supporting over 181 lbs. (82 kg) when property attached to building element.
Features
- Heavy-duty robe hook
- Fabricated of brass with a chrome finish
- Exposed mounting
- Three (3) 7/32″ diameter (Ø5.6) countersunk mounting holes
- 2-3/4″ diameter (Ø70) flange
- Surface Mounted
- Capable of supporting over 181 lbs. (82 kg) when properly attached to building element
Specifications
Model
0751-A
Type
Robe Hook (Heavy-Duty) – Surface Mounted (Exposed)
Dimensions
2-3/4″ x 2-3/4″ x 3-1/4 Projection (70 x 70 x 83 mm)
Construction
Heavy Duty Chrome Plated Brass
Mounting
Surface Mounted (Exposed)
Flange Diameter
2-3/4″ (Ø70)
Capacity
Hook is capable of supporting over 181 lbs. (82 kg) when properly attached to building element.
Finishes
- Satin Chrome
Operation & Maintenance
Washroom accessory products require regular surface cleaning. Clean with a soft clean rag moistened with a mild detergent, followed by a water-moistened clean rag and then a dry rag.
Installation
Unit is surface mounted on wall or partition using stainless steel Philips flat or oval head #10 self-threading screws (provided by others to suit wall conditions) in a manner capable of supporting 181 lbs (82 kg).
Ensure that mounting configuration complies with local building codes.
For compliance with 2010 ADA Accessibility Standards install the hook center-line 54″ [1372] maximum Above Finished Floor (AFF) when clear floor side reach access is provided or 48″ [1219] max AFF with clear floor forward reach access only provided.
ASI - 0040 Twin 9″ Jumbo Roll Toilet Tissue Dispenser – Surface Mounted
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
ASI - 0040 Twin 9″ Jumbo Roll Toilet Tissue Dispenser – Surface Mounted
Holds two 9″ (229 mm) diameter rolls of 2-1⁄4″ or 3″ (57 or 76 mm) diameter core. When one roll is depleted, slide panel to expose other roll. Door cabinet and mounting plate fabricated of 18 gauge type 304 stainless steel with a satin finish. Two viewing slots reveal toilet tissue rolls inside. Equipped with tumbler lock.
Stainless Steel Construction
Our heavy-duty items are made of high-quality 304 stainless steel, which is tough, durable, stain-resistant and easy to clean.
Tumbler Locks
Our tumbler locks provide convenience and security with an elegant look.
Viewing Slot
Slot in front cover of jumbo roll dispensers provides easy visual indication of remaining tissue supply.
Features
- Jumbo Twin Roll Dispenser
- Holds two 9″ (229 mm) diameter rolls
- Accommodates 2-1⁄4″ or 3″ (57 or 76 mm) diameter cores
- Slide panel exposes other roll when one roll is depleted
- Door cabinet and mounting plate fabricated of 18 gauge type 304 stainless steel with a satin finish
- Two viewing slots reveal toilet tissue rolls inside
- Equipped with tumbler lock
- Surface Mounted
Specifications
Model
0040
Type
Twin 9″ Jumbo Roll Toilet Tissue Dispenser
Dimensions
20-13⁄16″ x 11-3⁄8″ x 6-3⁄16″ (529 x 289 x 157 mm)
Construction
Type 304 Stainless Steel - Satin Finish
Cabinet & Mounting Plate
18 gauge Type 304 stainless steel
Mounting
Surface Mounted
Capacity
Holds two 9″ (229 mm) diameter rolls
Core Sizes
2-1⁄4″ or 3″ (57 or 76 mm) diameter core
Finishes
- Satin Finish
Operation & Maintenance
Two (2) 9″ [Ø229] outside diameter jumbo rolls of toilet tissue are mounted over 3″ [Ø76] inside diameter (ID) core adapters. Two (2) 2-1/4″ [Ø57] ID core rolls may be used by removing the core adapters.
Whenever one roll of toilet tissue is depleted, the other roll is selected by shifting over the lever at the bottom of the unit.
Viewing slots continuously reveal tissue level. Keylocked door prevents unauthorized access or removal. Tissue supply is replenished on a cycle determined by maintenance needs.
Installation
For general utility surface mount unit within 12″ [305] of front of toilet from center line and 31″ [787] above finished floor (AFF) from bottom of unit with five (5) No. 12 x 3/4″ [Ø5.5 x 20] pan head self threading screws (by others), or other types as more suitable to site conditions (by others), including wall type appropriate anchors (by others) as may be required through mounting holes provided.
For compliance with 2010 ADA Accessibility Standards install unit so that centerline of first roll is between 7″ and 9″ [178 to 229] from front of toilet and centerline of rolls is 19″ [483] minimum above finished floor (AFF) to 44″ [1118] max. AFF.
Company Info
Resources
Why Buy From Us?
Huge Inventory
Huge Inventory
No Hassle Returns
Satisfaction
Guaranteed
Guaranteed
News & Updates
Sign up to get the latest on sales, new releases and more …
