security
Don-Jo 87 — Protection Bar, 3-1/4″ × 8-3/4″, 7-ga Stainless, 630
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
Don-Jo 87 is a stainless-steel hardware protection bar that shields levers/exit devices from carts and gurneys. Made from 7-ga (.188) stainless, screw-mounted, finish 630 / US32D Satin Stainless. Typical size: 3-1/4″ × 8-3/4″. :contentReference[oaicite:0]{index=0}
Lead time: Generally stocked in 630 Satin Stainless.
Don-Jo 87 — Protection Bar (Lever / Exit Device Guard)
- VendorDon-Jo Manufacturing
- Model87 — Protection Bar
- Material / GaugeStainless steel, 7-ga (.188)
- MountingScrew mount (surface)
- UseDeflects carts away from levers/exit devices; wall or door mount
- Nominal Size3-1/4″ W × 8-3/4″ H
Gauge/finish/mount per Don-Jo product page; size corroborated from multiple distributors. :contentReference[oaicite:1]{index=1}
- 630 / US32D — Satin Stainless (published finish)
Manufacturer lists 630 as the finish for 87. :contentReference[oaicite:2]{index=2}
| Model | 87 — Protection Bar |
| Material | Stainless steel |
| Gauge / Thickness | 7-ga (.188) |
| Finish | 630 / US32D Satin Stainless |
| Mounting | Screw mount (surface) |
| Nominal Size | 3-1/4″ × 8-3/4″ |
| Projection (ref.) | ≈2″–3-1/4″ noted across reseller listings (verify for your application) |
Spec basis: Don-Jo page; size/pricing pages show 3-1/4″ × 8-3/4″; projection varies by listing. :contentReference[oaicite:3]{index=3}
Direct from Don-Jo. :contentReference[oaicite:4]{index=4}
Manufacturer does not publish an 87-specific video; above clips show comparable guard/protector use-cases. :contentReference[oaicite:5]{index=5}
Installation Difficulty
Level 1 — Simple: Basic drill/bolt-through install.
Don-Jo CLP106 — Commercial Latch Protector (Outswing), 2-1/8″ × 6″, 12-ga Stainless, 630
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
Don-Jo CLP106 is a commercial latch protector for outswing doors, sized 2-1/8″ × 6″, made from 12-ga (.104) stainless steel with concealed welded studs and fasteners. Works with levers and exit devices; ideal for key-in-knob/lever preps. Standard finish: 630 / US32D Satin Stainless. :contentReference[oaicite:0]{index=0}
Lead time: Generally stocked in 630; verify before quoting.
Don-Jo CLP106 — Commercial Latch Protector (Outswing)
- VendorDon-Jo Manufacturing
- ModelCLP106 (Commercial latch protector)
- Door SwingOutswing
- Size2-1/8″ W × 6″ H
- Material / GaugeStainless steel, 12-ga (.104)
- IncludesConcealed welded studs with fasteners
Specs per Don-Jo product page & spec sheet. :contentReference[oaicite:1]{index=1}
- 630 / US32D — Satin Stainless (CLP-106-630)
CLP106 is a stainless model; 630 is the published finish. Treat other colors as special-order only if factory confirms. :contentReference[oaicite:2]{index=2}
| Application | Works with levers & exit devices; covers strike area |
| Door Swing | Outswing |
| Dimensions | 2-1/8″ × 6″ |
| Gauge | 12-ga (.104) |
| Mounting | Concealed welded studs; supplied fasteners |
Installation Difficulty
Level 1 — Simple: Drill/bolt-through install.
Don-Jo LP-107 — Latch Protector (Outswing), 2-3/4″ × 7″, 12-ga Stainless, 630
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
Don-Jo LP-107 is a latch protector for outswing doors, sized 2-3/4″ × 7″, made from 12-ga (.104) stainless steel. Furnished with carriage bolts, washers & acorn cap nuts. Also offered with EBF fasteners as model LP-107-EBF. Works with key-in-knob/lever preps and exit devices. :contentReference[oaicite:0]{index=0}
Lead time: Generally stocked in 630 Satin Stainless; confirm before quoting.
Don-Jo LP-107 — Latch Protector (Outswing)
- VendorDon-Jo Manufacturing
- ModelLP-107 (std) • LP-107-EBF (EBF fasteners)
- Door SwingOutswing
- Size2-3/4″ W × 7″ H
- Material / GaugeStainless steel, 12-ga (.104)
- IncludesCarriage bolts, washers, acorn cap nuts
Specs per Don-Jo LP-107 & LP-107-EBF pages and spec sheet. :contentReference[oaicite:1]{index=1}
- 630 / US32D — Satin Stainless (LP-107-630, LP-107-EBF-630)
LP-107 series publishes 630 Satin Stainless as the finish. :contentReference[oaicite:2]{index=2}
| Application | Protects latch/strike on outswing doors; works with levers & exit devices |
| Dimensions | 2-3/4″ × 7″ |
| Gauge | 12-ga (.104) |
| Fasteners | Standard carriage bolts set (std) • EBF fasteners (LP-107-EBF) |
| Material | Stainless steel |
Refs: Don-Jo pages & spec PDF. :contentReference[oaicite:3]{index=3}
Installation Difficulty
Level 1 — Simple: Drill/bolt-through install.
Company Info
Resources
Why Buy From Us?
Huge Inventory
Huge Inventory
No Hassle Returns
Satisfaction
Guaranteed
Guaranteed
News & Updates
Sign up to get the latest on sales, new releases and more …
