PDQ SDE Tubular Pushbutton Lock – PIN + Key Override (Spirit Series)
$350.00
Electronic Interconnected Lock — Mobile/RFID/PIN Credentials, BLE 4.2/5.2 w/ AES-256, Quick Retrofit on Standard Preps, Spirit Series (CLS)
PDQ’s CLS is a wireless, app-managed interconnected lock for multifamily and light commercial entries. It drops into standard interconnected preps, supports smartphone mobile keys, RFID cards/fobs, and optional PIN keypad, and is managed with the PDQ Spirit app—no control panels or door wiring required.
Installation Difficulty
Level 3 — Pro Starter: Trade basics recommended; precise templating and alignment; door/frame adjustments likely; no building wiring.
Related Items
Cal-Royal CR8000 Series - Commercial Grade 1 Digital Keypad Door Lock ( Formerly CR3000)
$439.25
Grade 1 Heavy Duty Digital Keypad Door Lock
For Offices, Schools, Hospitals, Apartments, Hotel / Motel, Residential, Commercial, and Public Buildings
- Available in 2 3/8" backset just put in note on your order.
- Meets or exceeds requirements of BHMA / ANSI A156.2 Series 4000, GRADE 1
- Easy Installation & Programming
- Long-Life Battery Operation
- 2 Remote Switch Terminals
- Interchangeable Core
- Master Code
- 10 Manager Codes
- 1 Sub-Master Code
- 90 User Codes
- 5 Service Codes
- Passage Mode
- Weather Resistant
- Buzzer & Led Indicators
- Anti-Tamper Lockout
- Clutch Technology
- Non-Handed, Reversible
- Enable & Disable Users Mode
- Tactile Metal Keypad
- User Friendly
- Master Code – performs all programming functions.
- Sub-Master Code – performs all programming functions except delete or change Master Code.
- Manager Codes – CR3000 can accommodate 10 Managers each having different codes and under each Manager has 9 Users (1 Manager + 9 Users = 1 Bank). Managers are capable of programming / adding and deleting User codes under his Bank. Managers are also capable of accessing the next higher bank until another Manager Code appears.
- Service Codes (5) – are one-time codes only. It cannot be used again. Once a Service Code is entered, the unit will unlock but will automatically delete the code.
- Passage Mode – once enabled, the unit is unlocked continuously until “Disable Passage Mode” is initiated.
- Tones and LED Indicators – can be programmed for different settings. Making sure that every key pressed is confirmed by an accompanying LED and/or tone.
- Next Free Code Location Finder – no need of guessing what free location is available in entering a new code. CR3000 can pinpoint and tell you where the next available location is.
- Code Locator Function – CR3000 can tell you the exact location of a certain code. Making it easy to determine what manager a user code is under.
- Keypad Anti-Tamper Lockout – if an invalid code is entered 3 times in succession, the unit will turn off for 30 seconds to prevent tampering.
- Remote Switch Terminal / Release – CR3000 provides 2 Remote Switch Terminal. Either can be used for an emergency push button switch, or connected to alarm systems such as fire alarms.
- Weather Resistant – CR3000 are manufactured making sure that internal electronic parts are protected from moisture, dust, water, and corrosion. All models are weather-resistant for temperature ranges of +158°F to -22°F (+70°C to -30°C).
- Clutch Technology – the outside lever of the CR3000 is a free-wheeling lever. If no valid code is entered, the lever will just turn freely without moving any parts inside, thus preventing breaking or tampering.
- Non-Handed – CR3000 can be installed for both left and right door opening.
- APPLICATIONS For offices, schools, hospitals, apartments, hotel/motel, residential, commercial, and public buildings.
- DOOR RANGES 1 ⅜” to 2” thickness.
- BACKSET 2 ¾” Standard, 2 ⅜”, 3 ¾”, 5” and 2 ¾” anti-friction latch with ¾” throw for pair of fire doors optional.
- LATCH FACEPLATE Standard 2 ¼” x 1 ⅛” for 2 ¾” backset. Optional 2 ¼” x 1 ⅛” for 2 ⅜” backset.
- STRIKES ASA strike standard, “T” and full lip strike available on request.
- ANSI STANDARDS Meets or exceeds BHMA/ANSI A156.2 Series 4000 Grade 1 requirements.
- POWER SUPPLY 4 AA Batteries (comes standard in packing)
- CLUTCH Clutch technology allows turning of lever without retracting the latch, thus prolonging the life of the lock by reducing stress on the spindle and other parts.
- CYLINDER & KEYWAYS 6 pin solid brass “C” keyway standard. Schlage E, Schlage C-K, Russwin D1-2-3-4, Corbin 59/60, Corbin-Russwin L4, Sargent LA-LB-LC, Falcon / Weiser E, Arrow A, Yale 8, Yale GA and Kwikset. Can also accept Medeco, Assa, Kaba and Cal-Royal (HSK) High-Security Cylinders.
- INTERCHANGEABLE CORE (IC) Interchangeable Core locks will accept compatible 6 or 7 pin cores with BEST, FALCON, and ARROW. Prefix “IC” before part number.
- WEATHER RESISTANT All models are weather-resistant for temperature ranges of +158○F to -22○F (+70○C to -30○C).
- KEYPAD 12 programmable buttons for multi-level access functions including group or individual user codes, master and management codes, passage, and emergency or service codes.
-
(IC) Indicates function available with BEST, FALCON & ARROW Interchangeable Core.
Installation Challenge Level
Challenging
Recommended for Experienced Installers, but not rocket science.
Don-Jo 87 — Protection Bar, 3-1/4″ × 8-3/4″, 7-ga Stainless, 630
$98.00
Don-Jo 87 — Protection Bar (Lever / Exit Device Guard)
Don-Jo 87 is a stainless-steel hardware protection bar that shields levers/exit devices from carts and gurneys. Made from 7-ga (.188) stainless, screw-mounted, finish 630 / US32D Satin Stainless. Typical size: 3-1/4″ × 8-3/4″.
Lead time: Generally stocked in 630 Satin Stainless.
Product Specs
Vendor
Don-Jo Manufacturing
Model
87 — Protection Bar
Material / Gauge
Stainless steel, 7-ga (.188)
Mounting
Screw mount (surface)
Use
Deflects carts away from levers/exit devices; wall or door mount
Nominal Size
3-1/4″ W × 8-3/4″ H
Finishes
- 630 / US32D — Satin Stainless
Manufacturer lists 630 as the finish for 87.
Technical Specs
Model
87 — Protection Bar
Material
Stainless steel
Gauge / Thickness
7-ga (.188)
Finish
630 / US32D Satin Stainless
Mounting
Screw mount (surface)
Nominal Size
3-1/4″ × 8-3/4″
Projection (ref.)
≈2″–3-1/4″ noted across reseller listings (verify for your application)
Videos
Manufacturer does not publish an 87-specific video; this clip shows comparable guard/protector use-cases.
Don-Jo CLP106 — Commercial Latch Protector (Outswing), 2-1/8″ × 6″, 12-ga Stainless, 630
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
Don-Jo CLP106 — Commercial Latch Protector (Outswing)
Don-Jo CLP106 is a commercial latch protector for outswing doors, sized 2-1/8″ × 6″, made from 12-ga (.104) stainless steel with concealed welded studs and fasteners. Works with levers and exit devices; ideal for key-in-knob/lever preps. Standard finish: 630 / US32D Satin Stainless. :contentReference[oaicite:0]{index=0}
Lead time: Generally stocked in 630; verify before quoting.
- VendorDon-Jo Manufacturing
- ModelCLP106 (Commercial latch protector)
- Door SwingOutswing
- Size2-1/8″ W × 6″ H
- Material / GaugeStainless steel, 12-ga (.104)
- IncludesConcealed welded studs with fasteners
Specs per Don-Jo product page & spec sheet. :contentReference[oaicite:1]{index=1}
- 630 / US32D — Satin Stainless (CLP-106-630)
CLP106 is a stainless model; 630 is the published finish. Treat other colors as special-order only if factory confirms. :contentReference[oaicite:2]{index=2}
| Application | Works with levers & exit devices; covers strike area |
| Door Swing | Outswing |
| Dimensions | 2-1/8″ × 6″ |
| Gauge | 12-ga (.104) |
| Mounting | Concealed welded studs; supplied fasteners |
Installation Difficulty
Level 1 — Simple: Drill/bolt-through install.
Don-Jo ELP-208 — Electric-Strike Latch Protector (Outswing), 3-1/2″ × 8″, 12-ga Steel
Sold Out
Please contact us by email or phone for pricing on this item.
Don-Jo ELP-208 — Electric-Strike Latch Protector (Outswing)
Don-Jo ELP-208 is a steel latch protector for electric strikes on outswing doors. 12-ga (.104) steel, 3-1/2″ × 8″, furnished with carriage bolts, washers & acorn cap nuts. Variants include ELP-208P (no cylinder hole) and LELP-208 (cut to clear lever rose). Optional EBF fastener version. Finishes: SL Silver, DU Dark Bronze, 622 Black. Specs/finishes per Don-Jo pages & PDF. :contentReference[oaicite:0]{index=0}
Lead time: Generally stocked; confirm finish/variant availability.
- VendorDon-Jo Manufacturing
- ModelsELP-208 (std) • ELP-208P (blank) • LELP-208 (lever cut)
- FastenersStandard bolts • EBF fasteners option
- Door SwingOutswing
- Material / GaugeSteel, 12-ga (.104)
- Size3-1/2″ × 8″
- FinishSL Silver • DU Dark Bronze • 622 Black
- UseDesigned to fit most electric strikes; completely encases keeper; use with mortise, keyless & exit devices
Refs: ELP-208, LELP-208, ELP-208P pages; EBF variants & finishes in catalog. :contentReference[oaicite:1]{index=1}
| Models | ELP-208 (with cylinder hole) • ELP-208P (no cylinder hole) • LELP-208 (clearance for up to ~3-3/4″ lever rose) :contentReference[oaicite:2]{index=2} |
| Fastener option | EBF (factory “EBF fasteners” versions) :contentReference[oaicite:3]{index=3} |
| Dimensions | 3-1/2″ × 8″ • 12-ga (.104) steel :contentReference[oaicite:4]{index=4} |
| Door swing | Outswing :contentReference[oaicite:5]{index=5} |
| Finishes | SL (Silver), DU (Duro/Dark Bronze), 622 (Black) :contentReference[oaicite:6]{index=6} |
Installation Difficulty
Level 1 — Simple: Drill/bolt-through install.
Company Info
Resources
Why Buy From Us?
Huge Inventory
Huge Inventory
No Hassle Returns
Satisfaction
Guaranteed
Guaranteed
News & Updates
Sign up to get the latest on sales, new releases and more …
