Door Trim & Accessories
Commercial Door Keyed Removable Mullions, Push Plates, Pull Handles, Pull Bars, Push Bars, Pull Handles, Kickplates, Corner Guards, Latch Guards, Door Stops, Door Holds, Manual Flushbolts, and Door Viewers from PDQ. Our products meet the requirements of the Buy American Act.
Don-Jo 87 — Protection Bar, 3-1/4″ × 8-3/4″, 7-ga Stainless, 630
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
Don-Jo 87 is a stainless-steel hardware protection bar that shields levers/exit devices from carts and gurneys. Made from 7-ga (.188) stainless, screw-mounted, finish 630 / US32D Satin Stainless. Typical size: 3-1/4″ × 8-3/4″. :contentReference[oaicite:0]{index=0}
Lead time: Generally stocked in 630 Satin Stainless.
Don-Jo 87 — Protection Bar (Lever / Exit Device Guard)
- VendorDon-Jo Manufacturing
- Model87 — Protection Bar
- Material / GaugeStainless steel, 7-ga (.188)
- MountingScrew mount (surface)
- UseDeflects carts away from levers/exit devices; wall or door mount
- Nominal Size3-1/4″ W × 8-3/4″ H
Gauge/finish/mount per Don-Jo product page; size corroborated from multiple distributors. :contentReference[oaicite:1]{index=1}
- 630 / US32D — Satin Stainless (published finish)
Manufacturer lists 630 as the finish for 87. :contentReference[oaicite:2]{index=2}
| Model | 87 — Protection Bar |
| Material | Stainless steel |
| Gauge / Thickness | 7-ga (.188) |
| Finish | 630 / US32D Satin Stainless |
| Mounting | Screw mount (surface) |
| Nominal Size | 3-1/4″ × 8-3/4″ |
| Projection (ref.) | ≈2″–3-1/4″ noted across reseller listings (verify for your application) |
Spec basis: Don-Jo page; size/pricing pages show 3-1/4″ × 8-3/4″; projection varies by listing. :contentReference[oaicite:3]{index=3}
Direct from Don-Jo. :contentReference[oaicite:4]{index=4}
Manufacturer does not publish an 87-specific video; above clips show comparable guard/protector use-cases. :contentReference[oaicite:5]{index=5}
Installation Difficulty
Level 1 — Simple: Basic drill/bolt-through install.
Don-Jo CLP106 — Commercial Latch Protector (Outswing), 2-1/8″ × 6″, 12-ga Stainless, 630
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
Don-Jo CLP106 is a commercial latch protector for outswing doors, sized 2-1/8″ × 6″, made from 12-ga (.104) stainless steel with concealed welded studs and fasteners. Works with levers and exit devices; ideal for key-in-knob/lever preps. Standard finish: 630 / US32D Satin Stainless. :contentReference[oaicite:0]{index=0}
Lead time: Generally stocked in 630; verify before quoting.
Don-Jo CLP106 — Commercial Latch Protector (Outswing)
- VendorDon-Jo Manufacturing
- ModelCLP106 (Commercial latch protector)
- Door SwingOutswing
- Size2-1/8″ W × 6″ H
- Material / GaugeStainless steel, 12-ga (.104)
- IncludesConcealed welded studs with fasteners
Specs per Don-Jo product page & spec sheet. :contentReference[oaicite:1]{index=1}
- 630 / US32D — Satin Stainless (CLP-106-630)
CLP106 is a stainless model; 630 is the published finish. Treat other colors as special-order only if factory confirms. :contentReference[oaicite:2]{index=2}
| Application | Works with levers & exit devices; covers strike area |
| Door Swing | Outswing |
| Dimensions | 2-1/8″ × 6″ |
| Gauge | 12-ga (.104) |
| Mounting | Concealed welded studs; supplied fasteners |
Installation Difficulty
Level 1 — Simple: Drill/bolt-through install.
Don-Jo LP-107 — Latch Protector (Outswing), 2-3/4″ × 7″, 12-ga Stainless, 630
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
Don-Jo LP-107 is a latch protector for outswing doors, sized 2-3/4″ × 7″, made from 12-ga (.104) stainless steel. Furnished with carriage bolts, washers & acorn cap nuts. Also offered with EBF fasteners as model LP-107-EBF. Works with key-in-knob/lever preps and exit devices. :contentReference[oaicite:0]{index=0}
Lead time: Generally stocked in 630 Satin Stainless; confirm before quoting.
Don-Jo LP-107 — Latch Protector (Outswing)
- VendorDon-Jo Manufacturing
- ModelLP-107 (std) • LP-107-EBF (EBF fasteners)
- Door SwingOutswing
- Size2-3/4″ W × 7″ H
- Material / GaugeStainless steel, 12-ga (.104)
- IncludesCarriage bolts, washers, acorn cap nuts
Specs per Don-Jo LP-107 & LP-107-EBF pages and spec sheet. :contentReference[oaicite:1]{index=1}
- 630 / US32D — Satin Stainless (LP-107-630, LP-107-EBF-630)
LP-107 series publishes 630 Satin Stainless as the finish. :contentReference[oaicite:2]{index=2}
| Application | Protects latch/strike on outswing doors; works with levers & exit devices |
| Dimensions | 2-3/4″ × 7″ |
| Gauge | 12-ga (.104) |
| Fasteners | Standard carriage bolts set (std) • EBF fasteners (LP-107-EBF) |
| Material | Stainless steel |
Refs: Don-Jo pages & spec PDF. :contentReference[oaicite:3]{index=3}
Installation Difficulty
Level 1 — Simple: Drill/bolt-through install.
Company Info
Resources
Why Buy From Us?
Huge Inventory
Huge Inventory
No Hassle Returns
Satisfaction
Guaranteed
Guaranteed
News & Updates
Sign up to get the latest on sales, new releases and more …
