Door Trim & Accessories
Commercial Door Keyed Removable Mullions, Push Plates, Pull Handles, Pull Bars, Push Bars, Pull Handles, Kickplates, Corner Guards, Latch Guards, Door Stops, Door Holds, Manual Flushbolts, and Door Viewers from PDQ. Our products meet the requirements of the Buy American Act.
Don-Jo 87 — Protection Bar, 3-1/4″ × 8-3/4″, 7-ga Stainless, 630
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
Don-Jo 87 is a stainless-steel hardware protection bar that shields levers/exit devices from carts and gurneys. Made from 7-ga (.188) stainless, screw-mounted, finish 630 / US32D Satin Stainless. Typical size: 3-1/4″ × 8-3/4″. :contentReference[oaicite:0]{index=0}
Lead time: Generally stocked in 630 Satin Stainless.
Don-Jo 87 — Protection Bar (Lever / Exit Device Guard)
- VendorDon-Jo Manufacturing
- Model87 — Protection Bar
- Material / GaugeStainless steel, 7-ga (.188)
- MountingScrew mount (surface)
- UseDeflects carts away from levers/exit devices; wall or door mount
- Nominal Size3-1/4″ W × 8-3/4″ H
Gauge/finish/mount per Don-Jo product page; size corroborated from multiple distributors. :contentReference[oaicite:1]{index=1}
- 630 / US32D — Satin Stainless (published finish)
Manufacturer lists 630 as the finish for 87. :contentReference[oaicite:2]{index=2}
| Model | 87 — Protection Bar |
| Material | Stainless steel |
| Gauge / Thickness | 7-ga (.188) |
| Finish | 630 / US32D Satin Stainless |
| Mounting | Screw mount (surface) |
| Nominal Size | 3-1/4″ × 8-3/4″ |
| Projection (ref.) | ≈2″–3-1/4″ noted across reseller listings (verify for your application) |
Spec basis: Don-Jo page; size/pricing pages show 3-1/4″ × 8-3/4″; projection varies by listing. :contentReference[oaicite:3]{index=3}
Direct from Don-Jo. :contentReference[oaicite:4]{index=4}
Manufacturer does not publish an 87-specific video; above clips show comparable guard/protector use-cases. :contentReference[oaicite:5]{index=5}
Installation Difficulty
Level 1 — Simple: Basic drill/bolt-through install.
Don-Jo CLP106 — Commercial Latch Protector (Outswing), 2-1/8″ × 6″, 12-ga Stainless, 630
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
Don-Jo CLP106 is a commercial latch protector for outswing doors, sized 2-1/8″ × 6″, made from 12-ga (.104) stainless steel with concealed welded studs and fasteners. Works with levers and exit devices; ideal for key-in-knob/lever preps. Standard finish: 630 / US32D Satin Stainless. :contentReference[oaicite:0]{index=0}
Lead time: Generally stocked in 630; verify before quoting.
Don-Jo CLP106 — Commercial Latch Protector (Outswing)
- VendorDon-Jo Manufacturing
- ModelCLP106 (Commercial latch protector)
- Door SwingOutswing
- Size2-1/8″ W × 6″ H
- Material / GaugeStainless steel, 12-ga (.104)
- IncludesConcealed welded studs with fasteners
Specs per Don-Jo product page & spec sheet. :contentReference[oaicite:1]{index=1}
- 630 / US32D — Satin Stainless (CLP-106-630)
CLP106 is a stainless model; 630 is the published finish. Treat other colors as special-order only if factory confirms. :contentReference[oaicite:2]{index=2}
| Application | Works with levers & exit devices; covers strike area |
| Door Swing | Outswing |
| Dimensions | 2-1/8″ × 6″ |
| Gauge | 12-ga (.104) |
| Mounting | Concealed welded studs; supplied fasteners |
Installation Difficulty
Level 1 — Simple: Drill/bolt-through install.
Don-Jo ELP-208 — Electric-Strike Latch Protector (Outswing), 3-1/2″ × 8″, 12-ga Steel
Sold Out
Please contact us by email or phone for pricing on this item.
Don-Jo ELP-208 is a steel latch protector for electric strikes on outswing doors. 12-ga (.104) steel, 3-1/2″ × 8″, furnished with carriage bolts, washers & acorn cap nuts. Variants include ELP-208P (no cylinder hole) and LELP-208 (cut to clear lever rose). Optional EBF fastener version. Finishes: SL Silver, DU Dark Bronze, 622 Black. Specs/finishes per Don-Jo pages & PDF. :contentReference[oaicite:0]{index=0}
Lead time: Generally stocked; confirm finish/variant availability.
Don-Jo ELP-208 — Electric-Strike Latch Protector (Outswing)
- VendorDon-Jo Manufacturing
- ModelsELP-208 (std) • ELP-208P (blank) • LELP-208 (lever cut)
- FastenersStandard bolts • EBF fasteners option
- Door SwingOutswing
- Material / GaugeSteel, 12-ga (.104)
- Size3-1/2″ × 8″
- FinishSL Silver • DU Dark Bronze • 622 Black
- UseDesigned to fit most electric strikes; completely encases keeper; use with mortise, keyless & exit devices
Refs: ELP-208, LELP-208, ELP-208P pages; EBF variants & finishes in catalog. :contentReference[oaicite:1]{index=1}
| Models | ELP-208 (with cylinder hole) • ELP-208P (no cylinder hole) • LELP-208 (clearance for up to ~3-3/4″ lever rose) :contentReference[oaicite:2]{index=2} |
| Fastener option | EBF (factory “EBF fasteners” versions) :contentReference[oaicite:3]{index=3} |
| Dimensions | 3-1/2″ × 8″ • 12-ga (.104) steel :contentReference[oaicite:4]{index=4} |
| Door swing | Outswing :contentReference[oaicite:5]{index=5} |
| Finishes | SL (Silver), DU (Duro/Dark Bronze), 622 (Black) :contentReference[oaicite:6]{index=6} |
Installation Difficulty
Level 1 — Simple: Drill/bolt-through install.
Don-Jo LP-107 — Latch Protector (Outswing), 2-3/4″ × 7″, 12-ga Stainless, 630
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
Don-Jo LP-107 is a latch protector for outswing doors, sized 2-3/4″ × 7″, made from 12-ga (.104) stainless steel. Furnished with carriage bolts, washers & acorn cap nuts. Also offered with EBF fasteners as model LP-107-EBF. Works with key-in-knob/lever preps and exit devices. :contentReference[oaicite:0]{index=0}
Lead time: Generally stocked in 630 Satin Stainless; confirm before quoting.
Don-Jo LP-107 — Latch Protector (Outswing)
- VendorDon-Jo Manufacturing
- ModelLP-107 (std) • LP-107-EBF (EBF fasteners)
- Door SwingOutswing
- Size2-3/4″ W × 7″ H
- Material / GaugeStainless steel, 12-ga (.104)
- IncludesCarriage bolts, washers, acorn cap nuts
Specs per Don-Jo LP-107 & LP-107-EBF pages and spec sheet. :contentReference[oaicite:1]{index=1}
- 630 / US32D — Satin Stainless (LP-107-630, LP-107-EBF-630)
LP-107 series publishes 630 Satin Stainless as the finish. :contentReference[oaicite:2]{index=2}
| Application | Protects latch/strike on outswing doors; works with levers & exit devices |
| Dimensions | 2-3/4″ × 7″ |
| Gauge | 12-ga (.104) |
| Fasteners | Standard carriage bolts set (std) • EBF fasteners (LP-107-EBF) |
| Material | Stainless steel |
Refs: Don-Jo pages & spec PDF. :contentReference[oaicite:3]{index=3}
Installation Difficulty
Level 1 — Simple: Drill/bolt-through install.
DON-JO ULP111 — Universal Latch Protector (Out-Swing, 12-ga Stainless, 11.75″ × 3.5″)
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
Don-Jo ULP111 is a universal latch protector for out-swing doors. Works with lever locks, mortise locks, and exit devices. Made from 12 ga (.104) stainless steel, size 11.75″ × 3.5″, furnished with carriage bolts, washers, and acorn cap nuts for strength.
Lead time: Typically stocked in 630 (US32D).
Don-Jo ULP111 — Specs & Details
- VendorDon-Jo Manufacturing, Inc.
- ModelULP111 — Universal Latch Protector
- Door SwingOut-swing
- Works WithLever locks • Mortise locks • Exit devices
- Material / GaugeStainless steel • 12 ga (.104″)
- Dimensions11.75″ L × 3.5″ W • Cutout ~8.75″
- Includes2 sets carriage bolts, washers & acorn cap nuts
Specs per Don-Jo ULP-111 page & latch protector sheet.
- 630 (US32D) — Satin Stainless (standard for ULP111)
Other colors are offered on related models (e.g., ULP211: BP/CP/DU/SL/626/622) — special order, call.
| Model | ULP111 (Universal Latch Protector) |
| Door Swing | Out-swing |
| Material | Stainless steel |
| Gauge / Thickness | 12 ga • 0.104″ |
| Size | 11.75″ length × 3.5″ width |
| Finish | 630 (US32D) Satin Stainless |
| Compatibility | Lever, mortise, and exit devices |
| Hardware Included | Carriage bolts, washers, acorn cap nuts (2 sets) |
Installation Difficulty
Level 2 — Easy: Basic layout & drilling; through-bolt hardware included.
Don-Jo ULP211 — Universal Latch Protector (Outswing), 11.75″ × 3-1/2″, 12-ga Steel
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
Don-Jo ULP211 is a universal latch protector for outswing doors. 12-ga (.104) steel, 11.75″ × 3-1/2″, furnished with carriage bolts, washers & acorn cap nuts. Works with lever locks, mortise locks, and exit devices. Finishes commonly stocked: 626 Satin Chrome, SL Silver, DU Dark Bronze, BP Brass.
Lead time: Generally stocked; confirm finish availability.
Don-Jo ULP211 — Universal Latch Protector (Outswing)
- VendorDon-Jo Manufacturing
- ModelULP211 (Universal Latch Protector)
- Door SwingOutswing
- Gauge / Material12-ga (.104) steel
- Size11.75″ L × 3-1/2″ W
- IncludesCarriage bolts, washers, acorn cap nuts
Specs/finishes per Don-Jo ULP 211 product page and latch protector sheet. :contentReference[oaicite:0]{index=0}
- 626 — Satin Chrome (ULP-211-626)
- SL — Silver Coated (ULP-211-SL)
- DU — Duro / Dark Bronze (ULP-211-DU)
- BP — Brass Plated (ULP-211-BP)
Special-order/limited: 622 — Black (listed on current site) and/or CP — Chrome Plated (older literature). Verify before listing as variants. :contentReference[oaicite:1]{index=1}
| Application | Lever locks, mortise locks, exit devices |
| Door Swing | Outswing |
| Cutout (ref) | Approx. 8.75″ (per Don-Jo sheet) |
| Shelf Pack | 10 |
Installation Difficulty
Level 1 — Simple: Drill/bolt-through install.
Company Info
Resources
Why Buy From Us?
Huge Inventory
Huge Inventory
No Hassle Returns
Satisfaction
Guaranteed
Guaranteed
News & Updates
Sign up to get the latest on sales, new releases and more …
