Products
dormakaba Simplex 3000 Narrow Stile Mechanical Pushbutton Lock — 26D/55, Thumbturn + Key Override
$288.00
Simplex 3000 — Narrow Stile Pushbutton Lock (Thumbturn, No Power)
The dormakaba Simplex 3000 is a mechanical pushbutton lock for narrow stile aluminum/glass doors (storefront). Single-code keypad (no batteries), key override, passage & lockout modes. Works with Adams Rite-style mortise deadlatches (purchased separately). Order the exterior trim plus the handed drive assembly to match handing and backset.
Lead time: 26D Satin Chrome and 55 Duranodic are commonly stocked; verify drive-assembly backset/hand before ordering.
-
Vendordormakaba
-
Series / ModelSimplex 3000 — Narrow Stile, Thumbturn + Key Override
-
PowerMechanical (no batteries or wiring)
-
EntrySingle code via pushbuttons + key override
-
ModesPassage (by key) • Lockout (by key)
-
Locking DeviceAdams Rite 4510/4710/4910 mortise latch (not included)
-
Stile / DoorNarrow stile; min stile ≈ 1-7/8″; door thickness up to ≈ 1-3/4″
-
HandingTrim is non-handed; drive assembly is handed (order LH or RH)
-
Backsets31/32″ • 1-1/8″ (also supports 1-1/2″ with 3030/3040)
- 26D / 626 — Satin Chrome
- 55 / 695 — Duranodic (Dark Bronze)
Other architectural finishes considered special order; call to confirm.
| Operation | Single-code pushbutton entry; key override; free egress |
| Modes | Passage (by key) • Lockout (by key) |
| Drive Assemblies | 3010/3020 = 31/32″ (RH / LH) • 3030/3040 = 1-1/8″ or 1-1/2″ (RH / LH) |
| Key Cylinder | MS-type mortise cylinder (override) — not included |
| Supplied | Install manual, template, combination change key, screwdriver |
| Weather | Weather-resistant exterior housing |
| Warranty | 1 year (manufacturer) |
Note: Order the trim + the correct drive assembly + an Adams Rite-style latch to complete a working set.
Reference videos; follow dormakaba documentation for exact steps.
Installation Difficulty
Level 3 — Intermediate: Narrow-stile layout, correct drive assembly (hand/backset), code setup.
Dormakaba Simplex 5000
$580.50
Dormakaba Simplex 5000
The ALREX PRO Hydraulic Door-Closer Hinge redefines door control, blending hydraulic precision with spring-hinge reliability. Built for demanding environments, its stainless-steel design ensures smooth, code-compliant performance while preventing disruptive slams—now with UL 10C 3-hour fire-rated certification for commercial use. Hold Open available for non-fire rated openings.
Applications
- Medical
- Arch Doors
- Custom Applications / OEM
- Transom Doors
- Hospitality
- Multi-Family
- Gates
-
Intelligent Speed Control: Adjustable hydraulic tension ensures smooth closing, preventing abrupt closures even in high-traffic areas.
-
5-Year Warranty: Confidence in quality and performance
-
UL 10C Fire Compliance: 3-hour fire-rated protection meets strict commercial building codes (NFPA 80/ADA).
-
Heavy-Duty Construction: 304 stainless steel body withstands 1,000,000+ test cycles.
-
Patent #10633905: Innovative engineering backed by patented technology.
-
Positive Latching Mechanism: Secures doors firmly into frames.
-
Architectural-Grade Aesthetics: Slim profile integrates seamlessly with modern door designs.
-
Satin Chrome 26D (626) housings and levers
-
Black (676) housings with Satin Chrome (626) levers and accents
-
Bright Brass 03 (605) housings and levers
-
Satin Brass 04 (606) housings and levers
-
Bright Chrome 026 (625) housings and levers
-
Dark Bronze 744 housings and levers with brass accents
Technical Details
Backset:
- Cylindrical: 2¾" (70 mm) backset, 2⅜" (60 mm) backset
- Exit Device: Varies by Exit Device
- Mortise: 2¾" (70 mm) backset
Latch: ½" (13 mm) latch, ¾" (19 mm) latch (optional)
Exit Device: Not supplied (see list on below for compatibility)
Exit Device Latch: Supplied with Exit Device
Minimum Stile Recommended: 5" (127 mm)
Exit Device Compatibility—Simplex 5000 Exit Trim
- Arrow S1250, Dorex 8500R/8500F, Sargent 8888
- Arrow S3883F/S3800, Dorex 9500PR/9500FR, Von Duprin 22/22F
- Black & Decker (K-2) QED111/112, dormakaba 9300/F9300, Von Duprin 98/98F
- Cal Royal 9800, Monarch 18R*, F18R*, Von Duprin 99/99F
- Cal Royal 2200, Precision 21/FL21, Von Duprin XP98/99
- Corbin Russwin ED5200/5200A, Sargent 2828, Yale YME2100/2100
- Detex 1001 BP1, Sargent 3828, Yale 7100
- Detex 10/F10 Series, Sargent 8810E/8800
*(requires special K-Hub Adapter)
Universal Lever Key-in-Cylinders: Includes dormakaba1599 6-pin cylinder (prepped to dormakaba 90 or Schlage "C" Keyway, keyed different) and tailpieces for compatibility with:
- Abloy 5277, Corbin Russwin 2000-03, Marks
- Abloy 5477, dormakaba 1539, Medeco 20W200H1
- Arrow C100, dormakaba Gemini 4730, Sargent 10 Line
- ASSA 65611, dormakaba Peaks 1099, Schlage 23-001
- ASSA 65691, dormakaba 1599, Schlage Primus 20-760
Australian: dormakaba expert 107K5, Boyd KC286
European: Quattro S/Expert, AP2 (5 and 6-pin)
Interchangeable Cores: Small format—Best and equivalents (6 or 7-pin length)
Removable Cores: Large format—ASSA/Medeco/Yale/Abloy (5 or 6-pin), Corbin Russwin (6 or 7-pin), Schlage, and Sargent
Door Preparation: Easily installs on wood or metal doors. ASA 161 door preparation with additional through holes.
Door Thickness:
- Cylindrical: 1⅜" (35 mm) to 2¼" (57 mm). Pre-assembled to accommodate doors 1⅝" (41 mm) to 2" (51 mm).
- Exit Trim and Mortise: 1¾" (44 mm) to 2¼" (57 mm). Pre-assembled to accommodate doors 1¾" (44 mm) to 2⅛" (54 mm).
Durability: D.O.D. Compliant 5220.22M for supplemental access control; weather resistant, wear tested for extensive use in indoor and outdoor applications
Fire Rating: 3-hour UL/ULC fire rating for "A" label doors and installed with an existing fire-ratedexit device (where applicable)
Warranty: Three-year warranty
Installation Difficulty
Level 1 — Skilled DIY: Anyone who can read instructions and use basic tools can install this product.
DORMAKABA Simplex 5021 Mechanical Pushbutton Lever Lock, 26D Satin Chrome, Entry w/ Key Override
$554.00
Grade 1 Mechanical Pushbutton Cylindrical Lever Lock, Single Code w/ Key Override, Non-Handed, 2-3/4" (std) or 2-3/8" Backset, 1/2" Latch (3/4" opt.), Satin Chrome (26D)
-
Vendordormakaba
-
Manufacturerdormakaba
-
SKU5021XSWL-26D-41
-
UIDDKB5021XSWL26D41
-
GradeANSI/BHMA Grade 1 (A156.2)
-
UL ListingUL 10C (up to 3-hour A-label doors)
-
Unit of MeasureEach
-
InstallationANSI 161 cylindrical + thru-bolts
-
ADA ComplianceYes
-
PowerNone (fully mechanical)
-
Limited Warranty3 Years
- 26D / 626 — Satin Chrome
- 026 / 625 — Bright Chrome
- 03 / 605 — Bright Brass
- 04 / 606 — Satin Brass
- 744 / 10B — Dark Bronze
- 676 — Black Housing w/ 626 Accents
-
HandingNon-handed; field reversible
-
TypeMechanical pushbutton lever lock
-
Backset2-3/4" (-41 std) or 2-3/8" (-40 opt)
-
Latch / Strike1/2" throw (3/4" opt); ASA 4-7/8" × 1-1/4"
-
Door Thickness1-3/8" to 2-1/4" (pre-set 1-5/8"–2")
-
Users / CodesSingle access code (1–5 digits); keypad programmable
-
Key OverrideKIL (Schlage C), SFIC/LFRC options
-
EnvironmentIndoor/Outdoor; weather-resistant
The Simplex 5021 delivers heavy-duty, battery-free access control with a vandal-resistant metal keypad and quick code changes from the exterior.
- Fully mechanical — no wiring or batteries
- Universal, ADA-compliant levers
- Direct-drive mechanism with stainless internal parts
- ANSI/BHMA Grade 1; UL 10C up to 3-hour fire doors
| Template | Full-Scale Drilling Template (PKG2845E) |
| Spec / Ops | E-Plex / Simplex 2000/5000 Specifications (KAA1297) |
| Install Guide | Installation Guide (KD10113-E) |
Installation Difficulty
Level 3 — Pro Starter: Template drilling & thru-bolts; basic door prep skills required; no wiring.
Dormakaba Simplex 7100 Deadbolt (7102/7108)
$218.00
Mechanical Pushbutton Auxiliary Lock — Deadbolt (Manual Relock), Single Code, Exterior Thumbturn, Field-Reversible, 2-3/8" or 2-3/4" Backset
The Simplex 7100 Series is a fully mechanical pushbutton deadbolt: no batteries, no wiring, and a fast code-only entry with interior free egress. Choose model 7102 for 2-3/4" backset or 7108 for 2-3/8" backset. Ideal as an auxiliary or primary deadbolt on light commercial and residential doors.
- Vendordormakaba
- Manufacturerdormakaba (Simplex)
- Models7102 (2-3/4" BS) • 7108 (2-3/8" BS)
- FunctionDeadbolt — manual relock via thumbturn
- Users / CodesSingle access code (1–5 digits), keypad programmable
- HandingNon-handed; field reversible
- Door Thickness1-3/8" to 2-1/4"
- Minimum Stile4"
- Backset2-3/8" (7108) • 2-3/4" (7102)
- Bolt / Strike1" tubular deadbolt • flat strike
- WeatherWeather-resistant (exterior keypad)
- PowerNone (purely mechanical)
- Warranty1-year manufacturer
- 26D (626) — Satin Chrome
- 03 (605) — Bright Brass
- 05 (609) — Antique Brass
- 19 (676) — Black*
*Note: Model 7106 is the only variant with Black inside trim; other Black models ship with Satin Chrome inside trim per factory sheet.
- OperationEnter code + exterior thumbturn; interior free egress
- Code ChangeOutside via keypad (no removal); follow combo-change procedure
- Door PrepANSI 161-style bores w/ additional thru-bolts; see template
- MaterialsAll-metal cast front; metal buttons; clutch-protected thumbturn
- EnvironmentIndoor / Outdoor (weather-resistant)
Use case: Auxiliary or primary deadbolt where a single shared code is acceptable and you want no electronics. Ideal for back-of-house, storerooms, gates, utility rooms, or rentals with controlled access policies.
- No batteries or wiring — purely mechanical reliability
- Single, easy-to-manage 1–5 digit code
- Quick code changes from the exterior
- Weather-resistant keypad with metal buttons
| Product / Config Sheet | Simplex 7100 Series — Spec & Options (PDF) |
| Install + Full-Scale Template | Simplex 7102/7108 — Installation & Template (PDF) |
| Brand Overview | Simplex by dormakaba |
Installation Difficulty
Level 2 — Handy DIYer: Standard tools; template drilling & accurate layout required. No wiring.
dormakaba Simplex LP1010 Exit Trim Lever Lock, Combination Only
$644.00
Simplex LP1010 — Mechanical Lever Keypad Lock
Simplex LP1000 Series
Eliminates problems and costs associated with issuing, controlling, and collecting keys and cards.
- Construction: Heavy-duty cast front housing; heavy-duty mounting plate; fixed ADA-compliant lever
- Numeric Keypad: Vandal resistant, solid metal pushbuttons
- Handing: Factory-handed; not field reversible
- Exit Device Strike: Supplied with Exit Device
- Tailpiece:
- 2¾" (70 mm) tailpiece for Exit Device operation from outside
- Optional 5" (125 mm) tailpiece for freezer doors (sold separately, part # 74773-000-01)
- Minimum Stile Recommended: 5" (127 mm)
- Weight: 8 lbs. (3.6 kg)
- Interchangeable Cores: Small format—Best and equivalents (6 or 7-pin length); core not included
- Removable Cores: Large format—Medeco/ASSA/Yale/Abloy (5 or 6-pin length), Corbin Russwin, Schlage, and Sargent; core not included
- Door Preparation: Recessed through bolts may be required for Exit Device preparation
- Door Thickness:
- 1⅜" (35 mm) to 2¼" (57 mm)
- Optional 5" (127 mm) tailpiece (sold separately, part # 74773-000-01)
- Accessibility Standard: Americans with Disabilities Act (ADA); fixed ADA-compliant lever
- Durability: Weather resistant
- Fire Rating: 3-hour UL/ULC fire rating for "A" labeled doors
- Warranty: 3-year warranty
Exit Device Compatibility:
For the most accurate listing of compatible Exit Devices, see this page on our website Black & Decker (K-12) QED111/112
Cal Royal 5000/F5000
Detex Advantex Series 10, 20, 21,40, 50, 51 Detex 10/F10 Series
Dorex 8500R/8500F Dorex 9500PR/9500FR
Dorma 9100, 9300, 9400 Monarch XX-R*, FXX-R, 18-R*, F-18-R*, 17-R, F-17-R, XX-V*, F-XX-V*, 18-V*, F-18-V*, F-XX-V*, 11-R*, 11-V* *(requires special K-Hub Adapter Kit)
Von Duprin 22, 88 NL, 98, 99, 900, 2227, 9827, 9847, 9847 WDC, 9848, 9857, 9927, 9947, 9947, WDC, 9948, 9957, 90027, 90047 WDC, 90057 •
Cannot be used with mortise design or most vertical rod Exit Devices
ATTENTION: Compatibility is subject to change if modifications are made by Exit Device manufacturers without Kaba Access Control’s knowledge
-
Vendordormakaba
-
Series / ModelSimplex LP1000 Series — LP1010 (lever)
-
PowerMechanical (no batteries or wiring)
-
EntrySingle access code (pushbuttons) + key override
-
Latch / BacksetsCylindrical latch; 2-3/4″ or 2-3/8″ backset
-
Door Thickness≈1-3/8″ to 2″ (kit-dependent)
-
HandingField-reversible (non-handed)
-
Code ChangeFrom exterior with key in place
-
FeaturesVandal-resistant keypad • Optional passage • Free egress
- 26D / 626 — Satin Chrome (typical stock)
- 10B / 613 — Oil-Rubbed Bronze (varies by distributor)
Other architectural finishes are special-order — call for availability.
| Model | LP1010 — Lever, mechanical keypad, key override |
| Backsets | 2-3/4″ (std) • 2-3/8″ (alt.) |
| Latch | Deadlocking cylindrical latch |
| Door Thickness | ≈1-3/8″ to 2″ (kit-dependent) |
| Code Capacity | Single code, thousands of combinations |
| Passage | Optional passage (toggle) where permitted |
| Keys/Cylinders | Accepts mortise cylinder for key override (by keyway) |
Official installation & combo-change references from dormakaba Americas.
Installation Difficulty
Level 3 — Intermediate: Cylindrical prep, handing check, and combo setup.
Falcon 8200 Automatic Operator & Switches Bundle for 1 door
$2,680.00
Everything you need to add a Falcon 8200 Automatic Operator to 1 Door
When you need a smart solution to improve handicap accessibility the Falcon 8200 Series from Allegion fits perfectly. This bundle gives you everything you need to add accessibility to one door:
- (1) Falcon 8200 Automatic Operator - 8231 Pull-side Mount or 8242 Push-side Mount
- (2) 6-inch Round or Square ADA Switches
- (2) 6-inch Round or Square ADA Switch Surface Mount Boxes
- (2) 433 Mhz Wireless ADA Transmitters
- (1) 433 Mhz Wireless ADA Receiver
Designed to fit perfectly
When you need a solution to improve accessibility and comply with the Americans with Disabilities Act (ADA), don't sacrifice performance for appearance. Instead get the performance you expect with the beauty, value and versatility you want by using the Falcon 8200 Series automatic operator. Designed for applications like assisted living and ambulatory care, where ease of use for physically challenged persons is critical, the Falcon automatic operator provides solid performance at a solid price. Everything you need is right in the box, making installation quick and easy. All necessary features are built right in, so configuring the closer is simple and you can easily make more openings more accessible than ever.
Features
- SmartLatch - Senses and overcomes external perssure conditions with a graduated energy assist for secure latching.
- Push'n'Go - Selectable feature allows door to open automatically as soon as it feels pressure.
- Open Position Learning - Automatically sets the opening position to eliminate wall and door damage.
- Obstacle Obstruction Detection - Safety feature stops and reverses door direction when distress or an obstruction is sensed.
- Pre-Load Strike Assist - Removes load on strike lip with a one second delay allowing the door to release and automatically open.
- LED Light Illumination - Light illumination on control box signals accurate installation and helps with connection diagnostics.
Wireless Button Features
- Dependable & Responsive
- Easy to Install
- Buttons - Cover Plates are Type 304 Stainless Steel in Brushed Satin Finish US32D(630)
- Surface Mount Enclosure Boxes in Black ABS Material
- 433 MHz Wireless Products are known for advanced rolling code technologies for high security application, improved range and longevity
- 433 MHz Transmitters for each switch
- 433 MHz Receiver for the Automatic Operator
- Pre-wired for quick installation
- 9 volt batteries included
Operator Specifications
- Header length - 26"
- Mounting - Surface Mount
- Handing - Non-handed
- Cycle Tested - 1 million gear box
Finishes
- Aluminum
Manufacturer Videos
Falcon 8200 Automatic Operators & Switches Bundle for Vestibule
$4,757.00
Everything you need to add a Falcon 8200 Automatic Operator to 2 doors in a vestibule
When you need a smart solution to improve handicap accessibility the Falcon 8200 Series from Allegion fits perfectly. This bundle gives you everything you need to add accessibility to a vestibule (one single switch outside each door and one double switch in the vestibule):
- (2) Falcon 8200 Automatic Operators - 8231 Pull-side Mount or 8242 Push-side Mount
- (4) Single 6-inch Round or Square ADA Switches / Push Plate
- (4) Single 6-inch Round or Square ADA Switch Surface Mount Boxes
- (4) 433 Mhz Wireless ADA Transmitters
- (2) 433 Mhz Wireless ADA Receivers
Designed to fit perfectly
When you need a solution to improve accessibility and comply with the Americans with Disabilities Act (ADA), don't sacrifice performance for appearance. Instead get the performance you expect with the beauty, value and versatility you want by using the Falcon 8200 Series automatic operator. Designed for applications like assisted living and ambulatory care, where ease of use for physically challenged persons is critical, the Falcon automatic operator provides solid performance at a solid price. Everything you need is right in the box, making installation quick and easy. All necessary features are built right in, so configuring the closer is simple and you can easily make more openings more accessible than ever.
Features
- SmartLatch - Senses and overcomes external perssure conditions with a graduated energy assist for secure latching.
- Push'n'Go - Selectable feature allows door to open automatically as soon as it feels pressure.
- Open Position Learning - Automatically sets the opening position to eliminate wall and door damage.
- Obstacle Obstruction Detection - Safety feature stops and reverses door direction when distress or an obstruction is sensed.
- Pre-Load Strike Assist - Removes load on strike lip with a one second delay allowing the door to release and automatically open.
- LED Light Illumination - Light illumination on control box signals accurate installation and helps with connection diagnostics.
Wireless Button Features
- Dependable & Responsive
- Easy to Install
- Buttons - Cover Plates are Type 304 Stainless Steel in Brushed Satin Finish US32D(630)
- Surface Mount Enclosure Boxes in Black ABS Material
- 433 MHz Wireless Products are known for advanced rolling code technologies for high security application, improved range and longevity
- 433 MHz Transmitters for each Switch
- 433 MHz Receiver for each Automatic Operator
- Pre-wired for quick installation
- 9 volt batteries included
Operator Specifications
- Header length - 26"
- Mounting - Surface Mount
- Handing - Non-handed
- Cycle Tested - 1 million gear box
Finishes
- Aluminum
Manufacturer Videos
Falcon 8200 Series Automatic Operator
$1,960.00
Designed to fit perfectly
When you need a solution to improve handicap accessibility, don’t sacrifice performance for appearance. Instead get the performance you expect with the beauty, value and versatility you want by using the Falcon 8200 Series automatic operator from Allegion. Designed for Americans with Disabilities Act (ADA) applications like assisted living and ambulatory care, where ease of use for physically challenged persons is critical, the Falcon automatic operator provides solid performance at a solid price. Everything you need is right in the box, making installation quick and easy. All necessary features are built right in, so configuring the closer is simple and you can easily make more openings more accessible than ever.
Features
- SmartLatch - Senses and overcomes external pressure conditions with a graduated energy assist for secure latching.
- Push'n'Go - Selectable feature allows door to open automatically as soon as it feels pressure.
- Open Position Learning - Automatically sets the opening position to eliminate wall and door damage.
- Obstacle Obstruction Detection - Safety feature stops and reverses door direction when distress or an obstruction is sensed.
- Pre-Load Strike Assist - Removes load on strike lip with a one second delay allowing the door to release and automatically open.
- LED Light Illumination - Light illumination on control box signals accurate installation and helps with connection diagnostics.
Specifications
- 8231 Pull-side Mount or 8242 Push-side Mount
- Header length - 26"
- Mounting - Surface Mount
- Handing - Non-handed
- Cycle Tested - 1 million gear box
Finishes
- Aluminum
Manufacturer Videos
Installation Instructions
HES 5000 Series Electric Strike
$203.00
The 5000 series is a compact, high performance electric strike designed for low profile openings where there is limited space behind the jamb. Its strength is derived from a unique keeper pin locking design, enabling the 5000 to exceed the ratings of the frame, door and locking hardware. This field selectable fail secure/fail safe unit is easy to install and accommodates latch bolts up to 5/8" throw.
Features
- Tamper resistant
- Static strength 1,500 lbs.
- Dynamic strength 70 ft-lbs.
- Endurance 500,000 cycles
- Field selectable fail secure/ fail safe
- Dual voltage 12 or 24 VDC/VAC
- Non-handed
- Internally mounted solenoid
- Accommodates 1/2" - 5/8" latchbolt (5/8" with 1/8" door gap)
- Strike body depth 1-1/16"
- Plug-in connector
- Trim enhancer included
- Five year limited warranty
Specs
- UL 1034 burglary-resistant listed and suitable for outdoor use
- UL 294 (6th Edition) listed
- ANSI/BHMA A156.31, Grade 1
- MEA New York City accepted
- Patent #5,934,720
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
HES 9400 Series Electric Strike
$451.00
The 9400 series is a slim-line, surface mounted electric strike designed to accommodate rim exit devices with a 1/2" Pullman latch. All components are completely encased within its 1/2" thick stainless steel housing, so no cutting on the frame is required for installation. Simply place the electric strike on the surface of the frame, align it with the exit latchbolt, and install.
The 9400 ships with a 1/8" spacer plate to accommodate varying door gaps. The 9400 exceeds Grade-1 standards for strength and performance. It is field selectable for fail secure and fail safe operation, and for 12 or 24VDC. The 9400 features a smooth cover to conceal the mounting screws and provide a sleek surface for superior looks.
Features
- Installs in metal and wood frames
- Completely surface mounted
- Decorative cover for sleek new look
- Stainless steel construction
- Tamper resistant
- Static strength 1,500 lbs.
- Dynamic strength 70 ft-lbs.
- Endurance 500,000 cycles
- 1/8" spacer plate included
- Field selectable fail safe/fail secure
- Dual voltage 12 or 24 VDC
- Horizontal adjustment
- Non-handed
- Internally mounted solenoid
- Accommodates up to 1/2" Pullman latch
- Five year limited warranty
Specs
- UL 1034 burglary-resistant listed and suitable for outdoor use
- UL 294 (6th Edition) listed
- ANSI/BHMA, A156.31 Grade 1 (#E09731, #E09732, #E09373)
- RoHS Compliant
- Patent 6,390,520;8,454,063
- Patent Pending
Frame application
- Metal
- Wood
Electrical
- .45 Amps at 12VDC continuous duty
- .25 Amps at 24VDC continuous duty
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
Instructions & Templates
Hollon Safe DP25EL Drop Safe
$148.00
DP25EL Drop Slot Safe with Solid steel construction with envelope drop slot, Electronic lock, Override Keys Included, Bolt Holes on the Back and Bottom (includes mounting hardware), and Not “B” Rated.
Features
- DP25EL
- Drop Slot Safe
- Solid steel construction with envelope drop slot
- Electronic lock
- Override Keys Included
- Bolt Holes on the Back and Bottom (includes mounting hardware)
- Not “B” Rated
Dimensions and Weight
Exterior Dimensions: 9-7/8″ H x 13-3/4″ W x 9-3/4″ D
Interior Dimensions: 9-3/4″ H x 13-5/8″ W x 9-5/8″ D
Weight: 17 lbs.
Hollon Safe E20 Hotel Safe
$139.00
E20 Hotel Safe with Dark Gray Color, Electronic keypad, Batteries included, Bolt Down Hardware included, and Key override, Keys included.
Features
- E20
- Dark Gray Color
- Electronic keypad
- Batteries included
- Bolt Down Hardware included
- Key override, Keys included
Dimensions and Weight
Exterior Dimensions: 7.75″H x 12.25″W x 7.75″D
Interior Dimensions: 7.5″ (H) x 12″ (W) x 6.25″ (D)
Weight: 14.33 lbs
Hollon Safe FB450E / FB450C Oyster Series Safe
$1,162.00
FB-450E Features
- 2 Hour Fireproof rating
- Intermesant seal for water and smoke resistance
- 2 massive 1.5″ moving front bolts
- 1 vertical locking bar
- 1 adjustable shelf
- Anchor bolt hole
- Bolt down hardware (concrete installation)
- Tri-spoke Handle
- High Intensity Auxiliary Relock Device
- Heavy Duty Vault Hinge
- S&G UL Listed, Type 1 Electronic Keypad
- Safe color: Grey-White
FB-450C Features
- 2 hour fire rated
- Intermesant seal for water and smoke resistance
- 2 Massive 1.5″ moving front bolts
- 1 vertical locking bar
- 1 adjustable shelf
- Anchor bolt hole
- Bolt down hardware (concrete installation)
- Tri-spoke Handle
- High Intensity Internal Auxiliary Relock Device
- Heavy Duty Vault Hinge
- Standard with CHROME UL Listed S&G Group 2 Dial
- Black Dial is an available option (See Picture)
- Safe color: Grey-White
Dimensions and Weight
Exterior Dimensions: 17-3/4”(H) x 20”(W) x 20-3/8”(D)
Interior Dimensions: 11-2/3”(H) x 14”(W) x 13”(D)
Cubes: 1.23
Weight: 215 lbs.
Downloads
Videos
Hollon Safe HDS-03C Drop Safe
$337.00
HDS-03C B-rated drop safe. UL Listed S&G Group 2 Dial lock. 4 Pre drilled mounting holes. 1/2″ Thick solid steel door. Interlocking steel plate on hinge side. 1/2″ thick drop slot.
Features
- HDS-03C
- B-rated drop safe
- UL Listed S&G Group 2 Dial lock
- 4 Pre drilled mounting holes
- 1/2″ Thick solid steel door
- Interlocking steel plate on hinge side
- 1/2″ thick drop slot
Dimensions and Weight
Exterior Dimensions: 12″ H X 8″ W X 10″ D
Interior Dimensions: 11-3/4″ H X 7-3/4″ W X 7″ D
Weight: 31 lbs.
Hollon Safe HGS-11E / HGS-11C Hunter Series Safe
$1,218.00
12 gauge steel. 1-1/4″ Solid Steel Active Locking Bolts. Drill resistant hardplate. Deluxe Interior. Deluxe pistol pockets. Choice of S&G SpyProof Dial or UL Listed, Type I S&G Electronic Lock.
Features
- 12 gauge steel
- 1-1/4″ Solid Steel Active Locking Bolts
- Drill resistant hardplate
- Deluxe Interior
- Deluxe pistol pockets
- Choice of S&G SpyProof Dial or UL Listed, Type I S&G Electronic Lock
- 4 Predrilled mounting holes (hardware included)
Dimensions and Weight
Ext. Dimensions: 55″ H x 17 3/8″ W x 16″ D
Int. Dimensions: 53″ H x 15 1/2″ W x 11″ D
Weight: 290 lbs.
Available Lock Types
- Electronic Keypad
- Combination Spin Dial
Videos
Hollon Safe HGS-16E / HGS-16C Hunter Series Safe
$1,553.00
12 gauge steel. 1-1/4″ Solid Steel Active Locking Bolts. Drill resistant hardplate. Deluxe interior. Deluxe pistol pockets. Choice of S&G SpyProof Dial or UL Listed, Type I S&G Electronic Lock.
Features
- 12 gauge steel
- 1-1/4″ Solid Steel Active Locking Bolts
- Drill resistant hardplate
- Deluxe interior
- Deluxe pistol pockets
- Choice of S&G SpyProof Dial or UL Listed, Type I S&G Electronic Lock
- 4 Predrilled mounting holes (hardware included)
Dimensions and Weight
Ext. Dimensions: 55″ H x 24″ W x 18″ D
Int. Dimensions: 53″ H x 22″ W x 12″ D
Weight: 390 lbs
Available Lock Types
- Electronic Keypad
- Combination Spin Dial
Videos
Hollon Safe HGS-6E / HGS-6C Hunter Series Safe
$689.00
12 gauge steel. 1-1/4″ Solid Steel Active Locking Bolts. Drill resistant hardplate. Deluxe Interior. Deluxe pistol pockets. Choice of S&G SpyProof Dial or UL Listed, Type I S&G Electronic Lock.
Features
- 12 gauge steel
- 1-1/4″ Solid Steel Active Locking Bolts
- Drill resistant hardplate
- Deluxe Interior
- Deluxe pistol pockets
- Choice of S&G SpyProof Dial or UL Listed, Type I S&G Electronic Lock
- 4 Predrilled mounting holes (hardware included)
Dimensions and Weight
Ext. Dimensions: 22 3/4″ H x 17 3/4″ W x 15″ D
Int. Dimensions: 20″ H x 15″ W x 8 3/8″ D
Weight: 115 lbs.
Available Lock Types
- Electronic Keypad
- Combination Spin Dial
Videos
Hollon Safe HGS-8E / HGS-8C Hunter Series Safe
$950.00
12 gauge steel. 1-1/4″ Solid Steel Active Locking Bolts. Drill resistant hardplate. Deluxe Interior. Deluxe pistol pockets. Choice of S&G SpyProof Dial or UL Listed, Type I S&G Electronic Lock.
Features
- 12 gauge steel
- 1-1/4″ Solid Steel Active Locking Bolts
- Drill resistant hardplate
- Deluxe Interior
- Deluxe pistol pockets
- Choice of S&G SpyProof Dial or UL Listed, Type I S&G Electronic Lock
- 4 Predrilled mounting holes (hardware included)
Dimensions and Weight
Ext. Dimensions: 30 3/4″ H x 18 7/8″ W x 17″ D
Int. Dimensions: 28″ H x 16″ W x 10 1/2″ D
Weight: 203 lbs.
Available Lock Types
- Electronic Keypad
- Combination Spin Dial
Videos
Hollon Safe WS-Bio-1 Wall Safe
$234.00
WS-Bio-1 Wall safe features a biometric entry control system for ease of access. Safe is made of heavy duty gauge steel. Approximately .50 cubic feet of storage space, with 1/8-inch steel door. Includes two interior shelves. Has key lock override system.
Features
- WS-Bio-1
- Wall safe features a biometric entry control system for ease of access
- Safe is made of heavy duty gauge steel
- Approximately .50 cubic feet of storage space, with 1/8-inch steel door
- Includes two interior shelves
- Has key lock override system
- *Depth behind keypad is actually 1-3/8*
Dimensions and Weight
Exterior Dimensions (This is accounting for the exterior “lip”) : 22 3/16″(H) x 14 15/16″(W) x 4″(D)
Exterior base (which goes into the wall) : 21″ (H) x 13 7/8″ (W) x 3 3/4″ (D)
Interior Dimensions: 19″(H) x 14″(W) x 3 1/8″(D)
Weight: 28 lbs
Hollon Safe WSE-2114 Wall Safe
$203.00
WSE-2114 Wall safe features a protective digital electronic locking system. Safe is made of heavy duty gauge steel. Approximately .50 cubic feet of storage space, with 1/8-inch steel door. Includes two interior shelves. Has key lock override system.
Features
- WSE-2114
- Wall safe features a protective digital electronic locking system
- Safe is made of heavy duty gauge steel
- Approximately .50 cubic feet of storage space, with 1/8-inch steel door
- Includes two interior shelves
- Has key lock override system
- *Depth behind keypad is actually 1-3/8*
Dimensions and Weight
Exterior Dimensions (This is accounting for the exterior “lip”) : 22 3/16″(H) x 14 15/16″(W) x 4″(D)
Exterior base (which goes into the wall) : 21″ (H) x 13 7/8″ (W) x 3 3/4″ (D)
Interior Dimensions: 19″(H) x 14″(W) x 3 1/8″(D)
Weight: 28 lbs
Hollon Safe-Drop Safe-HDS-03K
$254.00
-
Put a dead stop to theft or shrinkage – internal or external. Hollon Drop Safes allow companies to regain control of their cash and are the absolute best choice for a heavy duty commercial environment.
Constructed with solid steel plates welded with continuous welds for all parts of the safe. Designed for use with armored car services, restaurants, chain stores, convenience stores and government application.
- B-rated drop safe
- 4 Pre drilled mounting holes
- 1/2″ Thick solid steel door
- 2 manager Keys Included
- 1 Guard Key Included
- Interlocking steel plate on hinge side
- 1/2″ thick drop slot
Exterior Dimensions: 12″ H X 8″ W X 10″ D
Interior Dimensions: 11-3/4″ H X 7-3/4″ W X 7″ D
Weight: 31 lbs.
Hollon-Floor Safe-B1500- Free Shipping!
$692.00
You’ll need a jackhammer to pry these loose. Floor Safes offer the added advantage of concealment. Once a floor safe is installed in concrete and covered with a rug or carpet they are near impossible to find. In fact, if the floor safe is found, it will literally take a jack hammer to wrest it out of the foundation.
Also, the door of the safe consists of drill-resistant hard plate made of hardened steel. You can’t buy a drill or drill bit at your local hardware store that will even scratch the surface.
That’s why these bad boys are our favorite high-security safes for gold coins, jewelry, paperwork, and a variety of other valuables. B Rated and strong enough to use in a commercial environment but still affordable enough to install at home. Furthermore, we also install one of our UL Listed S&G Group II dials at no additional charge – to give you decades of problem-free usage. You won’t find a sturdier floor safe for the money.
Please note: While floor safes offer security being easily hidden and surrounded by concrete, these same features can also make them very susceptible to moisture problems. Keeping papers and valuables inside zip lock bags and/or Tupperware help when experiencing a fire or flood or humidity.
*Hollon Safe does not warranty electronic locks on any in ground floor safe.*
SHIPPING: Contiguous United States ONLY
***In some remote rural areas, islands, toll bridge access areas, union states, ferry tolls, etc. may be subject to additional charges. If charges apply the customer will be notified before shipping for approval. ***
B1500
- B Rated Floor Safe for Foundations
- 1/2″ Thick Solid Steel Door
- Spring loaded relocking device
- Full length dead bar
- Powder Coated for more durable protection
- UL Listed S&G Group 2 lock with external relocker to protect against burglary attempts
- (5) Solid Steel Locking Bolts
- Air-spring bar enable the door can be opened easily
- Drill resistant hardplate to protect lock
- Exterior Dimensions: 14-9/10”(H) x 13-1/2”(W) x 11-4/5”(D)
- Interior Dimensions: 12-9/10”(H) x 10-9/10”(W) x 6-9/10”(D)
- Weight: 79 lbs.
Hollon-Floor Safe-B2500 Free Shipping !
$749.00
You’ll need a jackhammer to pry these loose. Floor Safes offer the added advantage of concealment. Once a floor safe is installed in concrete and covered with a rug or carpet they are near impossible to find. In fact, if the floor safe is found, it will literally take a jack hammer to wrest it out of the foundation.
Also, the door of the safe consists of drill-resistant hard plate made of hardened steel. You can’t buy a drill or drill bit at your local hardware store that will even scratch the surface.
That’s why these bad boys are our favorite high-security safes for gold coins, jewelry, paperwork, and a variety of other valuables. B Rated and strong enough to use in a commercial environment but still affordable enough to install at home. Furthermore, we also install one of our UL Listed S&G Group II dials at no additional charge – to give you decades of problem-free usage. You won’t find a sturdier floor safe for the money.
Please note: While floor safes offer security being easily hidden and surrounded by concrete, these same features can also make them very susceptible to moisture problems. Keeping papers and valuables inside zip lock bags and/or Tupperware help when experiencing a fire or flood or humidity.
Hollon Safe does not warranty electronic locks on any in ground floor safe.
SHIPPING: Contiguous United States ONLY
In some remote rural areas, islands, toll bridge access areas, union states, ferry tolls, etc. may be subject to additional charges. If charges apply the customer will be notified before shipping for approval.
B2500
- B2500
- B Rated Floor Safe for Foundations
- 1/2″ Thick Solid Steel Door
- Spring loaded relocking device
- Full length dead bar
- Powder coated for more durable protection
- UL Listed Group 2 lock with external relocker to protect against burglary attempts
- (5) Solid Steel Locking Bolts
- Air-spring bar enable the door can be opened easily
- Drill resistant hardplate to protect lock
- Exterior Dimensions: 14-9/10”(H) x 13-1/2”(W) x 17-1/2”(D)
- Interior Dimensions: 12-9/10”(H) x 10-9/10”(W) x 11-3/10”(D)
- Weight: 93 lbs.
Hollon-Floor Safe-B3500 Free Shipping!
$976.00
You’ll need a jackhammer to pry these loose. Floor Safes offer the added advantage of concealment. Once a floor safe is installed in concrete and covered with a rug or carpet they are near impossible to find. In fact, if the floor safe is found, it will literally take a jack hammer to wrest it out of the foundation.
Also, the door of the safe consists of drill-resistant hard plate made of hardened steel. You can’t buy a drill or drill bit at your local hardware store that will even scratch the surface.
That’s why these bad boys are our favorite high-security safes for gold coins, jewelry, paperwork, and a variety of other valuables. B Rated and strong enough to use in a commercial environment but still affordable enough to install at home. Furthermore, we also install one of our UL Listed S&G Group II dials at no additional charge – to give you decades of problem-free usage. You won’t find a sturdier floor safe for the money.
Please note: While floor safes offer security being easily hidden and surrounded by concrete, these same features can also make them very susceptible to moisture problems. Keeping papers and valuables inside zip lock bags and/or Tupperware help when experiencing a fire or flood or humidity.
Hollon Safe does not warranty electronic locks on any in ground floor safe.
SHIPPING: Contiguous United States ONLY
In some remote rural areas, islands, toll bridge access areas, union states, ferry tolls, etc. may be subject to additional charges. If charges apply the customer will be notified before shipping for approval.
B3500
- B Rated Floor Safe for Foundations
- 1/2″ Thick Solid Steel Door
- Spring loaded relocking device
- Full length dead bar
- Powder Coated for more durable protection
- UL Listed S&G Group 2 dial with external relocker to protect against burglary attempts
- (5) Solid Steel Locking Bolts
- Air-spring bar enable the door can be opened easily
- Drill resistant hardplate to protect lock
- Exterior Dimensions: 18″(H) x 13-1/2″(W) x 23-1/2″(D)
- Interior Dimensions: 16-1/2″(H) x 13″(W) x 23″(D)
- Weight: 140 lbs
HPC Auto Key Keeper
$84.00
The Auto Key Keeper™ will end the loss of auto keys on car lots! Simply place a car's keys into the box. Lower the door window and slip the Key Keeper's back clip over the top edge of the glass. Closing the window secures the box and keys locked within against all but extreme and deliberate vandalism. These boxes are made of heavy-gauge steel with a charcoal grey baked enamel finish and a welded hinge to prevent knockout.
Features
- 5-Wafer Cam Lock with two keys (Keyed-Alike)
HPC Blitz™ Key Cutting Machine
$5,469.50
The Original Blitz™ Machine
HPC’s Blitz™ is the unequivocal “Standard of the Industry” and has been since its inception in 1978 when is was originally introduced as the 1200CM. It revolutionized cutting keys with its innovative code card system. By now tens of thousands of these machines have been sold around the world!
The Blitz™ machine can cut virtually all standard pin and disc tumbler keys, as well as many specialty keys. The Blitz™ machine is simple to use and very versatile. In less than 30 seconds you can change from cutting a Ford 8-cut key to cutting a Medeco® Biaxial key. With optional adapters, this versatile machine will also cut 6-space and 8-space Tibbe keys found on some Ford and Jaguar vehicles, as well as 7-pin tubular keys.
The Blitz™ is considered a “must-have” for any locksmith creating master key systems or doing code work.
Benefits
- The important information on the code cards includes key blank and code series references
- Simply insert the code card into the machine to cut a new key
Specifications
CMB Specs
- 120VAC 60hz1/3 hp 4.2 amps
- Shipping Weight: 35 lbs (16 kg)
- Machine Size:12"W x 14"D x 9"H(30W x 36D x 23H cm)
- Bench Size:20"W x 14"D(51W x 36D cm)
CMB240V Specs
- 50hz1/3 hp 1.8 amps
- Shipping Weight: 35 lbs (16 kg)
- Machine Size:12"W x 14"D x 9"H(30W x 36D x 23H cm)
- Bench Size:30"W x 14"D(51W x 36D cm)
CMBACDC Specs
- 120VAC / 12VDC 60hz1/7 hp 12.2 amps DC
- Shipping Weight: 45 lbs (20 kg)
- Machine Size:12"W x 14"D x 11"H(30W x 36D x 28H cm)
- Bench Size:20"W x 14"D(51W x 36D cm)
Manufacturer Videos
Manuals
HPC CodeMax® Key Cutting Machine
$7,736.40
Experience powerful computerized code cutting with CodeMax™
Put the power of a computer in your code cutting with the CodeMax® Machine. Based on the industry standard Blitz™ Machine, the CodeMax®, introduced more than 25 years ago, is the original computerized code machine. The CodeMax® has an internal computer chip that contains Depth & Space Data (DSD) for more than 950 different lock types, plus a micrometer function in both inch and metric formats. This allows it to cut virtually all standard vehicle, commercial, residential and furniture keys throughout the world. All models of the CodeMax® are equipped with a shoulder gauge safety switch. This feature ensures the shoulder gauge is out of the way before you start cutting a key.
On the Automatic Angler model (No. 1200MAXAA), the cutter pivots automatically to cut high security angle keys, such as Medeco®. Simply enter the depth and direction of the angle and the CodeMax® AA does the rest.
The total power of the CodeMax® is realized when you connect it to your PC. All machines come with a 25-foot (7.5m) 9-pin serial cable for easy connection to your computer. With HPC Software, the CodeMax® Machine becomes an integral part of your computer system.
Benefits
- With CodeSource® code retrieval software, creating an original key is as simple as looking up the code on your computer and downloading it to your CodeMax®.
- Downloading master key systems from MasterKing®, insuring error-free key cutting.
- The ability to interrupt that master key job to cut another code key, and easily return to the master key system.
- Automatically keep track of new keys created when using
- KeyTrail® key management software. Please refer to the Software Section for complete information on all of our programs.
With optional equipment CodeMax® can cut:
- Assa V10/Twin®
- Corbin/Russwin
- Emhart® Interlocking Pin
- Medeco® Biaxial®, Commercial®, KeyMark® and M3 Freedom
- Sargent Degree
- Schlage Primus®
- Flat Steel Safe Deposit Keys and others
CodeMax® is a sound investment in your business and it will quickly become a vital part of your lock shop.
Manufacturer Videos
Cutting by DSD
Download from your computer
Features
Maintenance
Manuals
HPC Emergency Fire Department Key Box
$105.00
These boxes are designed to secure a restricted key where it is needed. The textured red steel box has a key-locking hinged door with a plexiglass window. When an emergency arises and access to the key is necessary, break the plexiglass with the attached hammer. The Fire Department Box comes with dark plexiglass to hide the contents. The Emergency Key Boxes come with a 5-wafer cam lock, keyed-randomly.
SPECS
- Dimensions: 6.625"H x 5.75"W x 2"D Weight 2lb. 6oz.
Manufacturer Video
HPC Emergency Key Box
$250.00
These boxes are designed to secure a restricted key where it is needed. The textured red steel box has a key-locking hinged door with a plexiglass window. When an emergency arises and access to the key is necessary, break the plexiglass with the attached hammer. The Emergency Key Boxes come with a 5-wafer cam lock, keyed-randomly.
SPECS
- Dimensions: 6.625"H x 5.75"W x 2"D Weight 2lb. 6oz.
Manufacturer Video
HPC KeKab® Key Storage
$83.00
HPC’s Keyable KeKab® eliminates the problem of how to control the key to the key cabinet. The Keyable KeKabs are equipped with a heavy-duty back plate and cam, and are designed to use any standard 1" mortise cylinder (Available in KEKAB60 only). Longer cylinders can be accommodated using spacer rings. The mortise cylinder, keys, and spacer rings are not supplied with this cabinet. Add convenience and security to the storage of your keys with the Keyable KeKab®.
Features
- White Plastic Key Tags with bright nickel plated snap-hooks which can hold multiple keys on each snap-hook. The tags are numbered for easy identification.
- Durable Steel Key Racks that are slotted to store key tags uniformly for immediate identification.
- "Out Key" Control Tags that are made of yellow paper. They are used for accountability (to record information on loaned keys).
- A Numbered Key Control Booklet for lock location data.
- Unique powder textured painting process which provides an attractive and very durable finish. The neutral sand color allows them to be hung anywhere.
- Heavy Gauge Steel Construction with piano hinged doors and key panels provides a sturdy location to secure your keys.
Manufacturer Video
HPC Mini Speedex® Key Duplicator Machine
$940.00
The Mini Speedex® is a lightweight, industrial-grade duplicator, and is one of the most accurate small key machines on the market. Its size and weight make it ideal for use in small or mobile lockshops. The 4-way jaws hold a large variety of different key blanks, including double-sided automotive keys. The expansive carriage range accommodates large-bow keys. The Mini Speedex® is equipped with a W1-grade tool steel cutter specifically designed for the high rpm motor. The machine comes with the HPC Softie˙ de-burring brush. The durable construction and bronze bearings combine for a long lasting machine.
Benefits
- The compact size easily fits in mobile or small lock shops
- The Mini Speedex® is equipped with the Softie™ Brush to quickly deburr the new key
- The 4-way jaws hold a wide variety of keys including double-sided automotive
Manufacturer Videos
Manuals
HPC Over Door Key Keeper
$84.00
The Over Door Key Keeper™ is perfect for preventing lost keys and lockouts! Secure one key or several in the keeper. The box is placed over the top edge of the door. When the door is closed, the top mounting screws are hidden. The key keeper has a sturdy piano hinged door. It is made of heavy gauge steel and has a charcoal gray finish.
Features
- 5-Wafer Cam Lock with two keys (Keyed-Alike)
HPC Pistolpick™ Pick Gun
$105.00
HPC's Pistolpick™ is designed to easily rake open pin and disc tumbler locks. Rapid squeezing of the trigger bounces the pick needle, raising the pins or discs to the shear line. All you add is proper tension, and the lock is open.
All parts, including the main housing, are made from nickel-plated cold rolled steel for protection against rust and to provide an attractive, high quality pistol finish. The Pistolpick™ comes with 3 pick blades and 2 tension wrenches. An optional leather holster case is available.
Features
- Squeezing the trigger causes the pick blade to bounce. The pick blade strikes the bottom pins into the top pins, raising them to the shear line.
- Use the Pistol Pick on your next lockout
Replacement Blades
HPC Power Speedex® Key Duplicator Machine
$1,955.00
The Power Speedex® is a semi-automatic duplicator, it is equipped with a spring-loaded carriage and safety release. This design holds the carriage against the cutter and tracer when cutting keys. The Power Speedex® has a molded plastic cover that encloses the heavy-duty motor. The 4-way jaws hold a large variety of different key blanks, including double-sided automotive keys. The expansive carriage range accommodates large-bow keys. The reversible tracer allows you to cut flat steel keys with the optional slotting cutter kit (No. CW-16KIT). The machine comes with the HPC Softie™ de-burring brush. The simplicity of operating the Power Speedex® makes easy work out of duplicating even a large number of keys. The durable construction and bronze bearings combine for a long lasting, accurate machine.
Benefits
- The semi-automatic operation makes it easy to cut a lot of keys
- The Power Speedex® is equipped with useful features, such as the Softie™ deburring brush and 4-way jaws
- With the reversible tracer and optional slotter cutter, you can start cutting safe deposit box and mail box keys
Manufacturer Videos
Manuals
HPC Security Locking Bars for 5 Drawer File Cabinet
$339.00
HPC's Security Locking Bars for File Cabinets are quickly installed on steel or wood file, blueprint, or tool cabinets. They include all necessary hasps and screws for easy, on-the-job installation. They are made of heavy-duty 0.5" x 1.5"(1.25 x 3.8cm) channel steel. The hole in the hasp is 5/16" (7.95mm). Padlock required
Features
- 5 Drawer Cabinets 59.875" (152.08cm)
- These Locking Bars are made of heavy duty 1/2" x 1 1/2" (1.25 x 3.8cm) channel steel.
LCN 1261-REG 693-LCN Surface Closer
$272.50
Grade 1 Surface Door Closer, Regular Arm, Push or Pull Side Regular or Top Jamb Mounting, 180 Degree, Size 1 to 5, No Cover, All Weather Fluid, Black Finish, Non-Handed
260 Series Surface Mounted Closers
Combines features of both the 1070 and 1370 LCN Series.
The 1260 Series is a versatile and economical cast iron clsoer with dual mounting capabilities. The 1260 has adjustable spring sizes 1-5 and mounts to the most common commercial footprint.
Features
- Standard 1260 series closer shipped with regular arm, a shaft cover, and self reaming and tapping screws. See 1260 Series catalog pages 8-9 for options
- Non-sized (1-5) cylinder is adjustable for interior doors to 4’6” and exterior doors to 3’6”
- Closer mounts hinge side, top jamb and parallel arm on either right or left swinging doors
- Mounts to most common commercial footprint (3/4” x 9 1/16”)
- Closer meets ADA requirements. See 1260 Series catalog page 10
- Optional Quick Fix™ bracket kit
- Standard or optional custom powder coat finish
- Optional SRI primer for installations in corrosive conditions
- Optional Slim Line cover
Technical Specs
Vendor
Allegion
Manufacturer
LCN
SKU
1261-REG 689
UID
LCN1001261REGAL
Grade
Grade 1
Installation
Commercial
Origin
USA
Unit of Measure
Each
Base Material
Varies
UL Listing Type
UL10C
ANSI Number
A156.4
BAA Qualified
Yes
Limited Warranty
20 Years
Product Specs
Type
Surface
Technology
Hydraulic
Mounting Location
Push or Pull Side
Mounting Style
Regular or Top Jamb
Hold Open
No
Closer Size
1 to 5
Arm Type
Regular Arm
Hand
Non-Handed
Degree Swing
180 Deg.
Cover
No
Screw Type
Self-Reaming and Tapping
Cold Weather Fluid
Yes
Product Type
Surface Closers
Finish
Finish
689/US28
Finish Description
Aluminum Painted
Finish Family
Matte Silver
LCN 4040XP-RW/PA 689 SRI
$618.00
Grade 1 Surface Door Closer, Regular Arm, PA Shoe, Push or Pull Side Mounting, 120 Degree Swing, Adjustable Size 1-6, Plastic Cover, Special Rust Inhibitor, Aluminum Painted Finish, Non-Handed
LCN’s 4040XP is a heavy-duty, cast-iron surface closer for high-traffic openings. It’s tri-mount (hinge, top jamb, parallel arm), adjustable sizes 1–6 with the Green Dial indicator, uses all-weather Liquid X fluid, and is available with Special Rust Inhibitor (SRI) for corrosive environments.
Product Specs
Vendor
Allegion
Manufacturer
LCN
Series / Model
4040XP — RW/PA
SKU Example
4040XP-RW/PA 689 SRI
Grade
ANSI/BHMA A156.4 Grade 1
Listings
UL 10C; ADA
Unit of Measure
Each
Origin
USA
BAA
Buy American Act — Yes
Finishes
- 689 — Aluminum (Painted)
- 690 — Statuary Bronze (Painted)
- 691 — Light Bronze (Painted)
- 693 — Gloss Black (Painted)
- 695 — Dark Bronze (Painted)
- 696 — Brass (Painted)
*SRI (Special Rust Inhibitor) available on powder-coat finishes for corrosive environments.
Technical Specs
Handing
Non-handed
Mounting
Tri-mount: Hinge (pull), Top Jamb (push), Parallel Arm (push)
Arm / Shoe
Regular Arm with PA shoe
Closer Size
Adjustable 1–6 (Green Dial indicator)
Valves
Sweep, Latch, Backcheck (field adjustable)
Max Opening
Template to 120° (use stops as required)
Fluid
All-weather Liquid X
Cover
Plastic (std); Metal cover optional
Hold-Open
No (specify hold-open arm if required)
Delayed Action
Optional (uses 4041 cylinder; not XP)
Fasteners
Self-reaming/tapping (wood/metal)
Corrosion Option
SRI — Special Rust Inhibitor
Use case:
High-traffic commercial / institutional doors needing a durable, adjustable closer with broad mounting flexibility and corrosion-resistant options.
- Cast-iron body, 1-1/2″ piston, hardened pinion
- Green Dial simplifies spring-force setting to meet ADA
- All-weather performance with Liquid X fluid
Docs & Templates
Videos
LCN 4040XP-RW/PA Heavy Duty Door Closer With Parallel Arm Bracket
$447.50
The new 4040XP-RW/PA is LCN's most durable heavy duty closer designed for the most demanding, high use and abuse applications. With Tri Pak arm. Regular arm for hinge side (pull side) and top jamb mount (push side) and parallel arm bracket for parallel arm mount for push side.
Features
- The LCN 4040XP replaces and retro fits the 4041 closer.
- Shipped with Tri Pak arm. Regular arm for hinge side (pull side) and top jamb mount (push side) and parallel arm bracket for parallel arm mount for push side.
- For interior doors to 5'0" and exterior doors to 4'0"
- Adjustable from size 1 through size 6 and is shipped set to size 3
- UL and cUL listed for self-closing doors without hold-open
- 4040XP can be used with all 4041 accessories
- Closer meets ADA requirements
Specifications
- XP = eXtra Protection in real world applications
- Cast Iron
- Forged Steel Arm
- Double Heat Treated Steel Pinion
- All Weather Fluid
- Non-Handed
Finishes
- Aluminum Painted
- Dark Bronze Painted
Instructions & Templates
Installation Video
LCN 4631-STD
$4,984.00
LCN 4630 / 4640 Auto Equalizer™ Series Operators
These electrically-powered and low-energy power operators are designed for primarily manual applications that sometimes require an automatic opening.
The 4630 and 4640 Series operators are designed primarily for manually opening applications that sometimes require an automatic opening. They are backed by a 2-year limited warranty, are UL and cUL listed, meet ANSI/BHMA 156.19, meet the American Disabilities Act (ADA) and ANSI A117.1 requirements for accessibility. The 4630 and 4640 Series are best for multi-door applications and provide easy access for the elderly and people with disabilities. The digital control box provides fast and accurate adjustments and the “No Destruct” drive system resists damage.
Product Specs
Body Construction
- Digital control box
- On-board power supply
- Factory default memory
Quality and Durability
- On-board diagnostics
- “No Destruct” drive system reduces chance of damage
- 2-year warranty
Installation
- Plug-and-play connections
- Installs without guard rails or safety mats
- Wood and machine screws
Finishes
- Standard or optional custom powder coated finish
- Black end caps
- Optional plated finish on cover, arm and fasteners
- Standard metal cover
Technical Specs
- Pneumatically powered multi-door solution
- Non-sized cylinders for interior doors to 4’6” and exterior doors to 3’6”
- Non-handed design
- Meets ADA requirements (power mode)
- Requires additional system components
- Tested and certified under ANSI/BHMA A156.4 Grade 1
Downloads
- LCN General Information Catalog
- 100 Years of LCN Brochure
- LCN Automatic Operators Catalog
- LCN Electrohydraulic Automatic Operators Data Sheet
- Choosing the Right Automatic Operator
- Allegion Commercial Warranty
Templates / Installation Instructions
4630/4640 Series
- 4630/4640 Series instruction booklet 28101
- LCN 4630/4640 Series Electric Auto-Equalizer Installation Instructions
- LCN 4630CS/4640CS Electric Auto-Equalizer Series Installation Instructions
- 4630CS/4640CS Series instruction booklet 29268
- 334 concealed switch retrofit 29293
- 7910-219 remote key switch 29285
- LCN Installation Instructions/Templates Index
Videos
Installation Difficulty
Level 4 — Advanced: Automatic operator installation with electrical connections, adjustments, and system setup.
LCN 4810-4820-4840
Sold Out
LCN Auto Equalizer Series — Pneumatic (4810/4820/4840)
The Auto Equalizer Series are a pneumatically powered multi-door solution. These quiet operators are designed for primarily manual applications that occasionally require automatic opening.
The 4810, 4820 and 4840 Series operators are designed primarily for manually opening applications that sometimes require automatic opening. They are best for multi-door applications and provide easy access for the elderly and people with disabilities. The quiet, low-energy operators are backed by a 2-year limited warranty and meet the American Disabilities Act (ADA) requirements for accessibility.
Body Construction
- Requires control box with integral compressor or control box using auxiliary air supply
- Utilizes a heavy duty door closer
- Pneumatically powered multi-door operator
Quality and Durability
- 2-year warranty
- Quiet design
- Ideal for multi-door applications; cost per door leaf decreases significantly as the number of door leaves increases
Installation
- Wood and machine screws
- No guard rails or safety mats required
- All-weather fluid
- Standard or optional custom powder coated finish
- Optional plated finish on cover, arm and fasteners
- Standard metal cover
- Pneumatically powered multi-door solution
- Non-sized cylinders for interior doors to 4’6” and exterior doors to 3’6”
- Non-handed design
- Meets ADA requirements (power mode)
- Requires additional system components
- Tested and certified under ANSI/BHMA A156.4 Grade 1
- LCN General Information Catalog
- 100 Years of LCN Brochure
- LCN Automatic Operators Catalog
- LCN Automatic Operator catalog section
- Choosing the Right Automatic Operator
- Low Energy Automatic Operator Brochure
- Allegion Commercial Warranty
Templates / Installation Instructions
4810 Series
4820 Series
4840 Series
Installation Difficulty
LCN 6440XP COMPACT Low Energy Auto Operator Module and Closer Kit
$1,576.00
LCN 6440XP COMPACT Low Energy Auto Operator, Gearmotor Assembly, Mounting Plate, and Screws, Plastic Cover, Power Supply, Door loop, 30' Copper wire, Includes 4040XP-RwPA Cylinder
A simpler solution for touchless access and accessible operation
The LCN 6400 COMPACT™ Series low-energy operator is a simple and cost-effective solution that enables facilities to automate more openings for touchless access and accessible operation. The electrified module connects with a mounting plate and just four screws and drives open the mechanical closer. The simplicity of this solution reduces the cost, labor, and complexity required to automate an opening.
Features
- Includes 4040XP cylinder and gearmotor assembly
- Pull and push side mounting options
- For doors up to 185 lbs.24V input for safe door-mount applications
- Configurable power input to allow for simple wall plug-in or external power supply
- Compact user interface for electronic feature adjustments
- Adjustments via mechanical closer to meet closing force preferences
- Certified to UL 10C, UL 325 and UL 228
- Certified to ANSI Standard A156.19
- Compliant with ANSI Standard A117.1
Components Included
- 4040XP Standard cylinder
- RwPA arm
- Gearmotor assembly, mounting plate, and screws
- Cover and switch insert
- Wall adapter
- Door loop
- 30 ft of copper wire
Compatibility
- Interior openings only
- Any hardwired actuator
- Any RF receiver and actuator/transmitter in the LCN 8310 Series
Specifications
Brand
LCN
Finishes
695 Dark Bronze (Powder Coated), 689 Aluminum (Powder Coated)
Input voltage
24 VDC (2A to operate)
On-Board Power Supply
24VDC (75mA to power RF receiver)
ANSI/BHMA Standard
ANSI/BHMA A156.19 certified
ADA Compliance
Meets ADA requirements - A117.1 Accessibility Code
Usage
Standard Duty
Mounting
Surface Mount - Push Side, Surface Mount - Pull Side
Handing
Non-Handed
Door Weight
up to 185 lbs.
Door Application
Interior metal and wood doors
Header Dimensions
12 1⁄4" W x 7 1⁄4" H x 3 3⁄4" D
Installation Instructions
Specification Sheets
Videos
LCN 9142 Benchmark ADA Low-Energy Electromechanical Operator - Push Side Mount
$3,300.00
LCN 9142 Grade 1 Regular Arm, Electromechanical Benchmark Low Energy Door Operator, Push Side Mounting
The Benchmark low-energy operators are electrically powered and are cost-effective for retrofitting an activated or manual door. The 9140 Series meets ANSI/BHMA A156.19 and ANSI A117.1 standards, are American Disabilities Act (ADA) compliant, UL-listed and feature a 2-year limited warranty.
The operators feature a Push ‘N Go activation, providing easy access for people with disabilities and the elderly. The Push ‘N Go feature takes over when a pedestrian manually opens the door to five degrees, then holds the door fully open for 1-30 seconds, depending on the time delay. Power Boost provides additional closing force in severe wind.
Features
- Push 'N Go permits non-switch activation
- Tested internally to over 3,000,000 cycles
- Non-Handed
- The 9140 Series meets ANSI/BHMA A156.19 and ANSI A117.1 standards, are American Disabilities Act (ADA) compliant, UL-listed and feature a 2-year limited warranty.
Specifications
Brand
LCN
Finishes
ANCLR Anodized Aluminum, ANDKB Dark Bronze
Usage
Standard Duty
Certifications
Grade 1 - ANSI A117.1, A156.19, UL 10C, ADA, 100 Hour Salt Spray, Meets BAA - Buy American Act
Handing
Non-Handed
Mounting
Top jamb (Push Side)
Arms
Regular Arm
Cover
Metal
Warranty
2 Years
Buy American Act Compliance
Meets Buy American Act - Made in USA
Finishes
- ANCLR Clear Anodized Aluminum
- ANDKB Dark Bronze Anodized
Installation Instructions
Specification Sheets
LCN 9531 Senior Swing ADA Low-Energy Electromechanical Operator - Pull Side Mount
$4,950.00
LCN 9531-STD Grade 1 Surface Door Operator, Slide Track Arm Standard, Pull Side Mounting, 36" Header, Satin Aluminum Clear Anodized Finish
The 9530 Senior Swing by LCN is an ADA door operator that is a two-in-one swing door operator. Senior swing operator when activated, opens doors automatically for wheelchair access, yet allows for manual operation for regular pedestrian traffic.
Features
- Push N' Go permits non-switch activation with a power boost
- Electromechanical unit with microprocessor control
- Pull side mounting, 36" header
- Certifications: Grade 1 - ANSI A156.19, UL325/228, UL1998, ADA, 100 Hour Salt Spray, Meets BAA - Buy American Act
- Fluid: All Weather Fluid
- Handing: Handed
- Door width: 36"
- Warranty: 2 years
- Fasteners: Machine Screws (MS)
- Mounting: Single door, surface mount, offset pivot, butt hinge, pull side
- Arms: Standard arm (3077T)
Included Components
Operator will be shipped with:
- Standard motor gearbox
- Standard control box
- Standard mounting header (HDR) (36" standard)
- Standard Arm (3077T)
- Standard track with track roller
- Machine screws
Specifications
Brand
LCN
Finishes
ANCLR Anodized Aluminum
Usage
Heavy Duty
Certifications
Grade 1 - ANSI A117.1, A156.19, UL 10C, ADA, 100 Hour Salt Spray, Meets BAA - Buy American Act
Handing
Handed
Mounting
Top jamb (Pull Side)
Mounting Header Width
36" standard
Arms
Standard arm and track
Warranty
2 Years
Buy American Act Compliance
Meets Buy American Act - Made in USA
Installation Instructions
Specification Sheets
LCN 9553-REG2 Senior Swing ADA Low-Energy Electromechanical Operator - Push Side Mount
$8,266.00
LCN 9553-REG2 Grade 1 Surface Door Operator, Double Lever Arm Regular, Push Side Mounting, 72" Header, Satin Aluminum Clear Anodized Finish, Non-Handed
The 9550 Senior Swing by LCN is an ADA door operator that is a two-in-one swing door operator. Senior swing operator when activated, opens doors automatically for wheelchair access, yet allows for manual operation for regular pedestrian traffic.
Features
- Push N' Go permits non-switch activation with a power boost
- Electromechanical unit with microprocessor control
- Push side mounting, 72" header
- Certifications: Grade 1 - ANSI A156.19, UL325/228, UL1998, ADA, 100 Hour Salt Spray, Meets BAA - Buy American Act
- Fluid: All Weather Fluid
- Handing: Handed
- Warranty: 2 years
- Fasteners: Machine Screws (MS)
- Mounting: Simultaneous pair, surface mount, pull side, push side, double egress
Included Components
Operator will be shipped with:
- Standard motor gearbox (SF) (2 ea)
- Standard control box (SC)
- Metal cover (72˝ length standard)
- Regular arm (2 ea)
- 2-3/4" pivot point
- Machine screws
Specifications
Brand
LCN
Finishes
ANCLR Anodized Aluminum
Usage
Heavy Duty
Certifications
Grade 1 - ANSI A117.1, A156.19, UL 10C, ADA, 100 Hour Salt Spray, Meets BAA - Buy American Act
Handing
Non-Handed
Mounting
Push Side (Standard Arm)
Mounting Header Width
72" standard
Arms
Regular Arm
Warranty
2 Years
Buy American Act Compliance
Meets Buy American Act - Made in USA
Installation Instructions
Specification Sheets
LRP1010-26D-41
Sold Out
Exit Trim Lever Lock, Combination Only, Right Hand Reverse, Satin Chrome
Norton 5241 Low Energy Door Operator, WiFi-Enabled - Push Or Pull Side Mount
$1,782.00
Norton 5241 Low Energy Door Operator
The 5200 Series is an electromechanical low energy operator offering functionality and superior user experience. The 5200 Series converts interior, non-fire rated doors easily while providing a simple way to achieve touchless environments. Available for push or pull mounting, this unit can be operated manually or activated by wall switches, or radio frequency devices. Complete with WiFi programming for easy installation and setup.
Features
- Push or pull side mounting
- WiFi programming for easy installation and setup
- Aesthetically pleasing, slim profilePush or pull side mounting
- Non-handed
- Activated by push button, hands-free, and radio frequency (RF) devices
- Maximum door size: 200 lbs. at 48" wide
- Aesthetically pleasing, slim profile
- Modular design
- Adjustable opening force
- Adjustable closing power
- 2 year limited warranty
- Power cord option
Benefits
- Operator is a secure, password protected WiFi hot spot - no connection to building’s IT required
- Simple setup; no app required
- View status and make adjustments without removing cover
- Built-in logic to support single use restroom applications - no external relay boards, logic modules, position switches required
- Modular installation - one-person install
- Easy set up and adjustments
Specifications
Brand
Norton
Finishes
WSP - White Suede Powder Coat, BSP - Black Suede Powder Coat, 690 Dark Bronze (Powder Coated), 689 Aluminum (Powder Coated)
Mounting
Surface Mount
Usage
Standard Duty
Traffic Rating
Low Traffic, Moderate Traffic
Handing
Non-Handed
Certifications
ANSI/BHMA A156.19, Americans with Disabilities Act (ADA) Compliant, ISO 14001 Certification, ISO 9001 Certification, UL325/991 Certified
Warranty
2-year limited warranty
Installation Instructions
Specification Sheets
Videos
Norton 565 Push Switch Kit
$854.00
Norton 565 Push Switch Kit includes (2) ADA1019-2 wall switches, (2) 548 transmitters (with 9 volt battery), and (1) 539 receiver.
Specifications
Brand
Norton
Part Type
Actuator / Door Switch
Includes
- (2) ADA1019-2 wall switches
- (2) 548 transmitters (with 9 volt battery)
- (1) 539 receiver
Compatible Operators
- 5600
- 5700
- 6000
- 6300
Norton 5740 Universal Low Energy Door Operator - Push Or Pull Side Mount
$3,100.00
A simple ADA solution for moderate traffic applications
A reliable ADA solution for moderate traffic applications, the 5700 Low Energy Operator comprises Norton’s heavy-duty 1601 door closer. The use of a hydraulic closer ensures quiet and consistently smooth operation, even when used manually if power is lost. The 5700 offers basic automated door functions and is designed to set up quickly, making it easy to specify and install.
Features
- Universal Unit - includes push and pull arms
- Designed for quick installation, setup and adjustments
- Hydraulic closer offers quiet and smooth operationOperates as mechanical surface close during close cycles, when door is opened manually or if power is off
- Spring force provides the feel of a normal manual door closer; door can be opened manually if desired
- Onboard power supply for accessories: 24VDC (1.1A)
Specifications
Brand
Norton
Usage
Standard Duty
Mounting
Surface Mount
Handing
Non-Handed
Spring Size
Adjustable Spring Size 1-6
Certifications
ANSI/BHMA A156.19, UL / cUL listed for use on fire rated doors
ADA Compliance
Meets ADA requirements - A117.1 Accessibility Code
UL Listing
C-UL US listed for use on fire and smoke barrier doors
Finishes
- BSP - Black Suede Powder Coat
- 689 Aluminum (Powder Coated)
- 690 Statuary Bronze (Powder Coated)
Installation Instructions
Specification Sheets
Company Info
Resources
Why Buy From Us?
Huge Inventory
Huge Inventory
No Hassle Returns
Satisfaction
Guaranteed
Guaranteed
News & Updates
Sign up to get the latest on sales, new releases and more …
