ASI - 9012 Baby Changing Station, HORIZONTAL – PLASTIC, Surface Mounted
CALL FOR PRICING
ASI - 9012 Baby Changing Station, HORIZONTAL – PLASTIC, Surface Mounted
Modern styling and easy-to-clean surface is fabricated of 100% high-density polyethylene. Intended use for infants up to 3.5 years old and up to 50 lbs (23kg). Surface mounted. Only 4″ (102 mm) deep when closed.
Unit platform is shaped to cradle a child’s body. Unit is easily opened and closed by user with one hand anywhere on top or front edge of bed or using bag hooks/hand grips on sides. Unit is operable with less than 5lbs force (22.2N) while not requiring any tight grasping, pinching or twisting of the wrist. Bed liner/towel dispenser presents liners or towels for user hygiene and convenience. Dispenser lip retains stack for single liner/towel dispensing. Safety strap is easily adjustable by user for baby size and Sure-Lock latch securely resists opening until released by opposing finger pressure by adult caretaker. Liners/ towels are easily replenished by service personnel as required.
Large Weight Capacity
Our baby changing stations have been tested using ASTM F2285-04 and EN 12221-1 protocol for a static load and in addition have been tested to hold a weight up to 250 lbs [113kg]. Some Baby Changing Stations have been tested for holding a weight >250lbs.
ADA Accessibility Standard Compliant
Our units are engineered to comply with the standards set forth by the American Disabilities Act for accessibility and safety.
Easy Open And Close
Our units are designed for easy one-handed operation and shaped to safely cradle a child’s body.
Features
- Horizontal baby changing station
- 100% high-density polyethylene construction
- Surface Mounted
- Low profile – only 4″ (102 mm) deep when closed
- Designed to support an infant up to 3.5 years old and up to 50 lbs (23 kg)
- Bed is shaped to cradle a child’s body
- Easy one-handed operation
- Adjustable two-part safety strap with Sure-Lock latch
- Two integral bag hooks
- Bed-liner dispenser convertible to a multi-fold towel dispenser
- Damped gas spring aids one-handed operation
Specifications
Model
9012
Type
Baby Changing Station, HORIZONTAL – PLASTIC
Closed Dimensions
36” x 22” x 4” (914 x 559 x 102 mm)
Open Dimensions
36” x 22” x 20-7/16” (914 x 559 x 519 mm)
Construction
High-Density Polyethylene (HDPE)
Mounting
Surface Mounted
Intended Use
Infants up to 3.5 years old and up to 50 lbs (23 kg)
Safety & Accessibility
- ADA compliant
- ASTM F-2285 & F-2388 compliant
- ANSI Z535 compliant
- ANSI 117.1 compliant
- Adjustable safety strap with Sure-Lock latch
- Operable with less than 5 lbs force (22.2N)
- No tight grasping, pinching or twisting of the wrist is required for operation
Operation & Maintenance
Unit platform is shaped to cradle a child’s body. Unit is easily opened and closed by user with one hand anywhere on top or front edge of bed or using bag hooks/hand grips on sides.
Bed liner/towel dispenser presents liners or towels for user hygiene and convenience. Dispenser lip retains stack for single liner/towel dispensing.
Safety strap is easily adjustable by user for baby size and Sure-Lock latch securely resists opening until released by opposing finger pressure by adult caretaker.
Ensure that the liner compartment is adequately stocked. Thoroughly clean the unit daily with warm water and mild anti-bacterial detergent, rinse with clean water and dry. Do not use abrasive cleaning agents.
Periodically inspect the unit to ensure that it remains securely attached to the wall and that the unit and wall mounting have not been affected by vandalism or abnormal wear.
Installation
Surface mount unit using hardware supplied through recessed mounting holes provided. Hardware kit supplied has fasteners suitable for metal or wood stud walls in dry locations and general hollow wall construction where adequate substrate strength is obtained.
Fasteners and anchors for masonry walls are not provided. Wall reinforcement must be suitable to sustain transfer of maximum unit loading.
Locate wall studs at 16″ (406 mm) O.C. for fastening the station. If two wall studs cannot be used, use two screws into one stud and install suitable toggle fasteners securely at the non-stud location.
Attach unit to wall studs with four 1/4″ x 3″ long Philips pan head self-threading screws with flat washers. Where wall studs are not available, attach with four 1/4″-20 x 3″ toggle bolts with flat washers into toggles or expansion nuts.
Installation should be performed by a qualified technician, and the wall and attachment method must be strong enough to support the rated load.
Related Items
ASI - 8206-L Folding Shower Seat, Solid Phenolic, White – L Shaped, 33″ Wide – Left Hand, ADA
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
ASI - 8206-L Folding Shower Seat, Solid Phenolic, White – L Shaped, 33″ Wide – Left Hand, ADA
(Left Hand) Meets ADA Accessibility Guidelines and the needs of the physically disabled and elderly. Seat is ½” (13 mm) thick, one piece solid, white colored, black core phenolic. Frame, support legs, flanges, and bracket are type 304 satin finish stainless steel. Phenolic seat ONLY is field reversible. Seat measures 33″ (838 mm) wide and projects 22-7⁄8″ (581 mm) from wall.
Stainless Steel Construction
Our cabinets are made of stainless steel, which is tough, durable, stain-resistant and easy to clean.
Features
- L Shaped – Left Hand – 33″ (838 mm) Wide – ADA
- Seat folds up when not in use
- Requires only one hand operation to manually lower to horizontal position for use or raise for departure and arrival
- White solid phenolic seat with black core
- Frame, support legs, flanges, and bracket are type 304 satin finish stainless steel
- Phenolic seat ONLY is field reversible
- Seat is slotted for drainage
- Surface Mounted
- Supports loads up to 500 lbs maximum if installed properly
Specifications
Model
8206-L
Type
Folding Shower Seat – L Shaped – Left Hand
Seat
½” (13 mm) thick, one piece solid, white colored, black core phenolic
Width
33″ (838 mm)
Projection
22-7⁄8″ (581 mm) from wall
Fold Down Dimensions
33″ x 17″ x 22-7/8″ (838 x 432 x 581 mm)
Fold Up Dimensions
33″ x 35-3/8″ x 22-7/8″ (457 x 899 x 581 mm)
Frame Construction
Type 304 Stainless Steel – Satin Finish
Mounting
Surface Mounted
Compliance
ADA
Capacity
Supports loads up to 500 lbs maximum if installed properly.
Finishes
- Seat: White Phenolic with Black Core
- Frame / Body: Type 304 Stainless Steel – Satin Finish
Operation & Maintenance
Fold-up Shower Seat requires only one hand operation to manually lower to horizontal position for use or raise for departure and arrival.
Guide bracket with spring detent prevents seat from dropping and provides positive support in usage position as well as spring locked storage position.
Installation
This unit is surface mounted. Installer/contractor must provide concealed anchor plate or blocking as specified in construction documents or as required by local building codes prior to wall finishing.
Fasten unit flanges and guide bracket to concealed anchor or blocking plate with appropriate hardware.
Concealed mounting plates or anchors and hardware are not supplied with this product and must be specified separately.
Ensure that mounting configuration complies with local building codes.
ASI - 20852 Roval™ Surface Mounted Sanitary Waste Receptacle
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
ASI - 20852 Roval™ Surface Mounted Sanitary Waste Receptacle
Cabinet front is formed seamless and capacity of the unit is 1 gal. (3.8 L). Unit is 22 gauge type 304 stainless steel alloy 18-8 with satin finish. Receptacle full top edge is hemmed with return to inside for user and service safety. Receptacle is screw-mounted to wall or partition through concealed keyhole slots provided through rear panel.
User lifts lid to deposit waste material. Unload unit by either removing the disposable wax paper liner bag (by others) or unhooking the unit from the mounting screws and inverting to empty into appropriate bulk collection container.
Stainless Steel Construction
Our heavy-duty items are made of high-quality 304 stainless steel, which is tough, durable, stain-resistant and easy to clean.
Tumbler Locks
Our tumbler locks provide convenience and security with an elegant look.
Staked Piano Hinges
Our heavy-duty, staked piano hinges provide security and a neat appearance, and they stand up to heavy use.
Features
- Curved front adds strength and elegance
- Cabinet front is formed seamless
- 22 gauge type 304 stainless steel alloy 18-8
- Concealed, multi-staked piano hinge
- Removable waste can
- Full top edge is hemmed with return to inside for user and service safety
- Type 304 Stainless Steel - Satin Finish
- Surface Mounted
- 1 gal. (3.8 L) capacity
Specifications
Model
20852
Series
Roval™
Type
Surface Mounted Sanitary Waste Receptacle
Dimensions
7-1/4″ x 10″ x 3-1/2″ (185 x 253 x 89 mm)
Construction
22 gauge type 304 stainless steel alloy 18-8
Capacity
1 gal. (3.8 L)
Mounting
Surface Mounted
Finishes
- Satin Finish
Operation & Maintenance
User lifts lid to deposit waste material. Maintenance schedule determines trash removal cycle. Unload unit by either removing the disposable wax paper liner bag (by others) or unhooking the unit from the mounting screws and inverting to empty into appropriate bulk collection container.
Installation
For general utility mount the receptacle 28″ [711] to 40″ [1016] above finished floor (AFF) from top of unit.
For compliance with 2010 ADA Accessibility Standards install unit so that top cover is no higher than 48″ [1219] above finished floor.
Hang unit on wall with two (2) pre-installed #10 x 1-1/4″ [32] self-threading pan head screws (by others) through the mounting keyhole slots provided into suitable wall reinforcements (by others) or two (2) pre-installed #10 x 3/4″ [19] self-threading pan head screws (by others) through the mounting keyhole slots provided into metal partition.
Repair Kits
Surface mounting collars conveniently adapt standard recessed mounting cabinets for use on walls with insufficient depth for recessing or wall materials that would make cutouts impossible.
ASI - 1214-2 Shower Curtain Rod – 1” dia. Bar, Stainless Steel
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
ASI - 1214-2 Shower Curtain Rod – 1” dia. Bar, Stainless Steel
Tubing is 1″ diameter (Ø25) x 20 gauge with a satin finish. Length will be as specified.
Rod is held captive by flanges (#1214-1, sold separately) when installed properly. Rod may rotate in flanges if turned by hand. Correctly installed rod and flanges will support specified shower curtain(s) hung on hooks 1200-SHU or others. Rod will bend and pull from flanges if significant body weight is suspended.
Features
- 1″ diameter (Ø25) bar
- 20 gauge tubing
- Type 304 Stainless Steel - Satin Finish
- Length will be as specified
- Wall Mounted
- Rod is held captive by flanges (#1214-1, sold separately) when installed properly
- Curtain hooks Model 1200-SHU may be used with the rod
Available Sizes
- 24″ (610 mm)
- 30″ (762 mm)
- 36″ (914 mm)
- 42″ (1067 mm)
- 48″ (1219 mm)
- 54″ (1372 mm)
- 60″ (1524 mm)
- 66″ (1676 mm)
- 72″ (1829 mm)
Maximum rod length is 120″ (3048 mm). Rods longer than 72″ (1829 mm) require ceiling hanger Model #1224-C18.
Specifications
Model
1214-2
Type
Shower Curtain Rod – 1″ dia. Bar, Stainless Steel
Diameter
1″ (Ø25)
Tubing
20 gauge
Construction
Type 304 Stainless Steel
Maximum Length
120″ (3048 mm)
Mounting
Wall Mounted
Flanges
#1214-1, sold separately
Finishes
- Satin Finish
Operation & Maintenance
Rod is held captive by flanges (#1214-1, sold separately) when installed properly. Rod may rotate in flanges if turned by hand.
Correctly installed rod and flanges will support specified shower curtain(s) hung on hooks 1200-SHU or others.
Rod will bend and pull from flanges if significant body weight is suspended.
Installation
Install rod in straight section between two (2) mounting flanges with no more than 1/4″ [6] total wall clearance.
Rods longer than 72″ [1829] require ceiling hanger Model #1224-C18.
For use with standard shower curtain Model #1200 or #1200-V having 72″ [1829] length and standard hooks (Model #1200-SHU), install unit with rod centerline 74-1/2″ [1892] maximum above finished floor (MAX AFF) or 67″ [1702] above tub rim to obtain 6″ [152] bottom overlap.
Seal screw holes in walls under flange to prevent any sprayed water from possibly infiltrating the wall structure.
ASI - 0600 Series Stainless Steel Inter-Lok Angle Frame Mirror – Variable Reflective Surfaces and Sizes
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
ASI - 0600 Series Stainless Steel Inter-Lok Angle Frame Mirror – Variable Reflective Surfaces and Sizes
3⁄4″ x 5⁄8″ (19 x 16 mm) roll formed 18 gauge type 304 stainless steel angle has corners heliarc welded, ground and polished smooth to a uniform satin finish. Mirror is installed on a concealed hanging bracket that locks onto top and bottom of frame by tamper-proof set screws. Back plate is one piece, attached to frame with theft-resistant locking device.
Stainless Steel Construction
Our heavy-duty items are made of high-quality 304 stainless steel, which is tough, durable, stain-resistant and easy to clean.
Features
- Roll formed, interlocking frame with heliarc welded corners
- Corners are ground and polished smooth to a uniform satin finish
- Type 304 stainless steel frame
- Concealed hanging bracket
- Tamper-proof set screws lock onto top and bottom of frame
- One-piece back plate with theft-resistant locking device
- Surface Mounted
- Various sizes and reflective surfaces available
Available Sizes & Reflective Surfaces
Plate Glass
- 0600-1620 – 16” wide x 20” high (406 x 508 mm)
- 0600-1624 – 16” wide x 24” high (406 x 610 mm)
- 0600-1630 – 16” wide x 30” high (406 x 762 mm)
- 0600-1824 – 18” wide x 24” high (457 x 610 mm)
- 0600-1830 – 18” wide x 30” high (457 x 762 mm)
- 0600-1836 – 18” wide x 36” high (457 x 914 mm)
- 0600-2060 – 20” wide x 60” high (508 x 1524 mm)
- 0600-2430 – 24” wide x 30” high (610 x 762 mm)
- 0600-2436 – 24” wide x 36” high (610 x 914 mm)
- 0600-2442 – 24” wide x 42” high (610 x 1067 mm)
- 0600-2448 – 24” wide x 48” high (610 x 1219 mm)
- 0600-2460 – 24” wide x 60” high (610 x 1524 mm)
- 0600-2472 – 24” wide x 72” high (610 x 1829 mm)
- 0600-3036 – 30” wide x 36” high (610 x 914 mm)
- 0600-3636 – 36” wide x 36” high (914 x 914 mm)
- 0600-3648 – 36” wide x 48” high (914 x 1219 mm)
- 0600-4830 – 48” wide x 30” high (1219 x 762 mm)
- 0600-4836 – 48” wide x 36” high (1219 x 914 mm)
- 0600-6036 – 60” wide x 36” high (1524 x 914 mm)
- 0600-7236 – 72” wide x 36” high (1829 x 914 mm)
Tempered Glass
- 0600-B1824 – 18” wide x 24” high (457 x 610 mm)
- 0600-B1830 – 18” wide x 30” high (457 x 762 mm)
- 0600-B1836 – 18” wide x 36” high (457 x 914 mm)
- 0600-B2430 – 24” wide x 30” high (610 x 762 mm)
- 0600-B2436 – 24” wide x 36” high (610 x 914 mm)
- 0600-B2448 – 24” wide x 48” high (610 x 1219 mm)
- 0600-B2460 – 24” wide x 60” high (610 x 1524 mm)
- 0600-B2472 – 24” wide x 72” high (610 x 1829 mm)
Stainless Steel, Type 304 with #8 Finish
- 0600-C1418 – 14” wide x 18” high (356 x 457 mm)
- 0600-C1824 – 18” wide x 24” high (457 x 610 mm)
- 0600-C1830 – 18” wide x 30” high (457 x 762 mm)
- 0600-C2430 – 24” wide x 30” high (610 x 762 mm)
- 0600-C2436 – 24” wide x 36” high (610 x 914 mm)
- 0600-C2460 – 24” wide x 60” high (610 x 1524 mm)
Specifications
Series
0600 Series
Type
Stainless Steel Inter-Lok Angle Frame Mirror
Frame
3⁄4″ x 5⁄8″ (19 x 16 mm) roll formed 18 gauge type 304 stainless steel angle
Frame Finish
Uniform satin finish
Construction
Type 304 stainless steel
Mounting
Surface Mounted
Reflective Surface Options
Plate Glass, Tempered Glass, and Stainless Steel Type 304 with #8 Finish
Back Plate
One piece, attached to frame with theft-resistant locking device
Reflective Surface Options
Plate Glass
#1 quality polished plate glass with silver coating and protective copper plating. Image quality: BEST.
Tempered Glass
1/4″ (6.4 mm) polished tempered glass with silver coating. Image quality: BETTER.
Stainless Steel with #8 Finish
Type 304 stainless steel polished to a #8 mirror finish. Image quality: FAIR.
Reflective quality may vary by surface type, and the likelihood of distortion increases as reflective surface size increases.
Finishes
- Frame: Type 304 Stainless Steel - Satin Finish
- Reflective Surface: Plate Glass
- Reflective Surface: Tempered Glass
- Reflective Surface: Type 304 Stainless Steel with #8 Finish
Installation
Install bracket level and plumb as per diagram location using #10 self-threading screws (by others).
Hang mirror on bracket and tighten locking screws at top and bottom.
For compliance with 2010 ADA Accessibility Standards and 2015 ABA Standards, bottom edge of reflecting surface should be no higher than 40″ [1016] Above Finished Floor.
Company Info
Resources
Why Buy From Us?
Huge Inventory
Huge Inventory
No Hassle Returns
Satisfaction
Guaranteed
Guaranteed
News & Updates
Sign up to get the latest on sales, new releases and more …
