Products
PDQ Extremely Heavy Duty Cylindrical Lock - XGT126 Passage
$189.00
US made, this line of grade 1 door locks gives you the best in security, durability, and cost. The XGT is able to withstand over 3,000 in. lbs. of torque resistance on its lever trim.
The XGT126 is a Passage function lock, where the latch bolt is operated by the lever from either side at all times. There is no locking function.
- Non keyed
- Latchbolt operated by lever from either side at all times
We also offer the XGT Series Cylindrical Lock in several other functions - Entrance/Office, Privacy, Storeroom and Classroom. Compare Functions.
Features
- ANSI Grade 1 Extremely Heavy Duty cylindrical door lock
- Exceeds 3,000 in lbs. of torque resistance
- High Strength stainless steel investment cast spindle. Heavy gauge steel mounting plates.
- Door Situation: Fits left, right wood/metal swing doors
- Architectural Finish
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
Specs
- FOR DOORS: 1-3/4" to 2-1/4" thick. Factory adjusted for 1-3/4"
- DOOR PREP: Fits standard 161 door prep. Through-door thru-bolting.
- BACKSET: 2-3/4" only. Guarded
- FRONT: 2-1/4" x 1-1/8". Beveled 1/8" on 2"
- STRIKE: 4-7/8" x 1-1/4"(ASA).
- LATCHBOLT: 9/16" Throw. Adjustable front for flat or beveled doors.
- HAND: Non-handed.
- TRIM: Zinc diecast levers/wrought brass rose.
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging
Recommended for Experienced or Professional Installers.
PDQ Extremely Heavy Duty Cylindrical Lock - XGT135 Intruder Classroom
$255.00
Extremely Heavy Duty Cylindrical Lock - XGT135 Intruder Classroom
US made, this line of grade 1 door locks gives you the best in security, durability, and cost. The XGT is able to withstand over 3,000 in. lbs. of torque resistance on its lever trim.
The XGT135 is a Classroom function lock, where the latch bolt is operated by a lever on either side EXCEPT when the outside lever is locked from the outside by a key.
- Latchbolt operated by lever from either side
- Outside lever locked by key from outside
- Outside lever unlocked by key from outside
- Inside lever always operates latch
We also offer the XGT Series Cylindrical Lock in several other functions - Entrance/Office, Privacy, Storeroom and Passage. Compare Functions.
Features
- ANSI Grade 1 Extremely Heavy Duty cylindrical door lock
- Exceeds 3,000 in lbs. of torque resistance
- High Strength stainless steel investment cast spindle. Heavy gauge steel mounting plates.
- Door Situation: Fits left, right wood/metal swing doors
- Architectural Finish
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
Specs
- FOR DOORS: 1-3/4" to 2-1/4" thick. Factory adjusted for 1-3/4"
- DOOR PREP: Fits standard 161 door prep. Through-door thru-bolting.
- BACKSET: 2-3/4" only. Guarded
- FRONT: 2-1/4" x 1-1/8". Beveled 1/8" on 2"
- STRIKE: 4-7/8" x 1-1/4"(ASA).
- LATCHBOLT: 9/16" Throw. Adjustable front for flat or beveled doors.
- HAND: Non-handed.
- TRIM: Zinc diecast levers/wrought brass rose.
- KEYS: Two change keys per lock.
- Cylinder(s) included
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging
Recommended for Experienced or Professional Installers.
PDQ Extremely Heavy Duty Cylindrical Lock - XGT148 Classroom
$225.00
US made, this line of grade 1 door locks gives you the best in security, durability, and cost. The XGT is able to withstand over 3,000 in. lbs. of torque resistance on its lever trim.
The XGT148 is a Classroom function lock, where the latch bolt is operated by a lever on either side EXCEPT when the outside lever is locked from the outside by a key.
- Latchbolt operated by lever from either side
- Outside lever locked by key from outside
- Outside lever unlocked by key from outside
- Inside lever always operates latch
We also offer the XGT Series Cylindrical Lock in several other functions - Entrance/Office, Privacy, Storeroom and Passage. Compare Functions.
Features
- ANSI Grade 1 Extremely Heavy Duty cylindrical door lock
- Exceeds 3,000 in lbs. of torque resistance
- High Strength stainless steel investment cast spindle. Heavy gauge steel mounting plates.
- Door Situation: Fits left, right wood/metal swing doors
- Architectural Finish
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
Specs
- FOR DOORS: 1-3/4" to 2-1/4" thick. Factory adjusted for 1-3/4"
- DOOR PREP: Fits standard 161 door prep. Through-door thru-bolting.
- BACKSET: 2-3/4" only. Guarded
- FRONT: 2-1/4" x 1-1/8". Beveled 1/8" on 2"
- STRIKE: 4-7/8" x 1-1/4"(ASA).
- LATCHBOLT: 9/16" Throw. Adjustable front for flat or beveled doors.
- HAND: Non-handed.
- TRIM: Zinc diecast levers/wrought brass rose.
- KEYS: Two change keys per lock.
- Cylinder(s) included
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging
Recommended for Experienced or Professional Installers.
PDQ Extremely Heavy Duty Cylindrical Lock - XGT176 Privacy
$205.00
PDQ XGT Series Heavy Duty Cylindrical Lock
US made, this line of grade 1 door locks gives you the best in security, durability, and cost. The XGT is able to withstand over 3,000 in. lbs. of torque resistance on its lever trim.
The XGT176 is a Privacy function lock which features push-button locking. The lock can be opened from the outside with an emergency release. The inside push button can be released by turning the inside lever.
- Non keyed
- Latchbolt operated by lever from either side or emergency release in outside lever
- Outside lever locked by push button on inside
- Outside lever unlocked by emergency release from outside, rotating inside lever, or closing door
We also offer the XGT Series Cylindrical Lock in several other functions - Entrance/Office, Storeroom, Classroom and Passage. Compare Functions.
Features
- ANSI Grade 1 Extremely Heavy Duty cylindrical door lock
- Exceeds 3,000 in lbs. of torque resistance
- High Strength stainless steel investment cast spindle. Heavy gauge steel mounting plates.
- Door Situation: Fits left, right wood/metal swing doors
- Architectural Finish
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
Specs
- FOR DOORS: 1-3/4" to 2-1/4" thick. Factory adjusted for 1-3/4"
- DOOR PREP: Fits standard 161 door prep. Through-door thru-bolting.
- BACKSET: 2-3/4" only. Guarded
- FRONT: 2-1/4" x 1-1/8". Beveled 1/8" on 2"
- STRIKE: 4-7/8" x 1-1/4"(ASA).
- LATCHBOLT: 9/16" Throw. Adjustable front for flat or beveled doors.
- HAND: Non-handed.
- TRIM: Zinc diecast levers/wrought brass rose.
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging
Recommended for Experienced or Professional Installers.
PDQ GTS-SP Electronic Cylindrical Lock (Grade 1)
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
The PDQ GTS-SP is a Grade-1, no-wires electronic cylindrical lock built on the GT chassis. It supports smartphone mobile credentials (BLE), RFID cards/fobs, and optional PIN keypad. Retrofit installs on standard ANSI 161 preps are fast and clean.
Lead time: Contact us for current availability.
PDQ GTS-SP Electronic Cylindrical Lock — Grade 1, Mobile/RFID/PIN, BLE 4.2/5.2, Non-Handed (field reversible)
- VendorPDQ Manufacturing
- SeriesSpirit — GTS Cylindrical
- GradeANSI/BHMA Grade 1 (GT platform)
- Door Thickness1-3/4″ to 2-1/4″
- Backset2-3/4″ (std), 5″ (opt)
- HandingLH/RH field reversible
- CredentialsRFID • Smartphone (BLE) • PIN • Mechanical key
- Comms / CryptoBLE 4.2 / 5.2 • AES-256
- Power4× AA alkaline (typ. up to 2 years)
- CertificationsFCC Part 15 • UL/cUL 10C 45-min • ADA compliant
- Warranty25-yr Mechanical / 2-yr Electronics
- Country of originAssembled in USA
-
626 — Satin Chrome (US26D)
-
622 — Flat Black (US19)
-
613E — Dark Oxidized Satin Bronze (Equivalent)
*606 Satin Brass (US4) available on request.
Configuration (select variants)
- Credential: N = Card/Mobile • NK = Card+Keypad
- Cylinder: D = Conventional • SFIC • UL437 High-Security
- Lever styles: PHL (default) • BSN • MIA
- Function: 116 Entrance/Office
- Backset: 2-3/4″ (std) • 5″ (opt)
- Strike: ASA 4-7/8″
- Handing: Non-handed, field reversible
| Platform | GT Series Grade-1 cylindrical |
| Door Thickness | 1-3/4″ to 2-1/4″ |
| Backset | 2-3/4″ standard; 5″ optional |
| Credentials | RFID • Smartphone (BLE) • PIN • Mechanical key |
| Power | 4 × AA alkaline (interior) |
| Environment | -20 °C to 65 °C; 0–95% RH, non-condensing |
| Certifications | FCC Part 15; UL/cUL 10C 45-min; ADA |
| Warranty | 25-yr mechanical / 2-yr electronics |
Use case: Unit entries and commercial openings needing mobile/RFID/PIN access without running wires. Manage schedules, passage/privacy modes, credentials, and audit history in the Spirit app.
- Quick retrofit—no panel wiring, no power transfer
- App-configurable schedules, auto-lock, alerts, & audit logs
- Door obstruction alerts and local lockdown
- Works with Conventional, SFIC, and UL437 cylinders
More official videos on PDQ’s site under Videos.
Installation Difficulty
Level 3 — Pro Starter: Trade basics recommended; precise templating & alignment; door/frame adjustments likely; no building wiring.
PDQ Hinge Stop
$8.00
The PDQ 245 Hinge Stops helps prevent damage to walls when opening a door. The rubber bumper tip of hinge stops for doors protects the door from getting damaged. Spring design allows flexibility with door and is easy to install.
Minimum Order Quantity: 10 pieces.
Features
- Positive slip proof adjustment
- Heavy wrought steel construction works with both 1⁄4” and 5⁄16” hinge pins
Specs
- MATERIAL: Wrought steel with rubber bumpers
- COMPLIANCES: ANSI/BHMA A156.16, TYPE L02223
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
PDQ Kick Down
$15.00
The PDQ Kick-Down Door Stop flips down easily to hold a door open. This Door Stop does not interfere with door operation while in raised position and is easy to install.
Minimum Order Quantity: 5 pieces.
Features
- Bumper provides reliable grip on floor
Specs
- MATERIAL: Cast steel
- COMPLIANCES: ANSI/BHMA A156.16, TYPE L01382
- Kick Down - 5” ANSI Type L01382
Finishes
Aluminum Painted 689/SP28
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
PDQ Kick Plate
$85.00
Provides protection for the bottom of the door from scuffing due to foot traffic or cleaning maintenance. Recommended for all doors especially when using a door closer.
Specs
- MATERIAL: Stainless Steel, Brass, Aluminum
- THICKNESS: 0.050"
- MOUNTING FASTENERS: • #6 x 5/8 OH PH SMS
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
PDQ Manual Flushbolt for Metal Door
$25.00
Flush bolts are used to secure an inactive door on a pair of double doors. PDQ 93170 series flush bolts are manual flush bolts for hollow metal doors. We have brass flush bolts, and steel flush bolts. PDQ 93170 flush bolts for hollow metal doors. Also please note that we also carry door coordinators if needed. We carry different types of flush bolt hardware for various installations.
Features
- Compatible with ANSI/BHMA 156.115 door and frame prep
- 3/4" slide bolt throw, 3⁄4" backset.
- 12" rod length (center of face to bolt end - retracted).
- 1-1⁄ 2" adjustable slide bolt.
- PDQ # 909 Dust Proof Strike recommended to prevent dirt from accumulating and clogging the bottom strike (ordered separately)
Specs
- BASE MATERIAL: Brass and steel
- FASTENERS: 16 ea. #8 x 3⁄4" FH combo screws
- FACE PLATE: 1" x 6-3⁄4"
- STRIKE: 15⁄16" x 2-1/4"
- GUIDE: 1" x 2"
- CERTIFICATIONS, LISTINGS, COMPLIANCES: Meets requirements of Buy American Act
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging
Recommended for Experienced Installers
Instructions & Templates
PDQ Mortise Lock - MR115 Storeroom-Single Cylinder no deadbolt
$375.00
The PDQ MR Series Mortise Lock is a Grade 1 commercial door lock made in the USA. The J Wide Series Trim covers previous fastener holes when replacing other brands of mortise lock.
The MR115 is a Storeroom function lock, where the latch bolt is operated by a key outside and the lever from the inside. The outside lever is rigid.
- Latchbolt operated by lever from inside
- Key outside retracts latchbolt
- Rigid outside lever
- Auxiliary latch deadlocks latchbolt
We also offer the MR Series Mortise Lock in several other functions - Entrance/Office, Classroom, Privacy, Apartment/Corridor, and Passage. Compare Functions.
We carry four lever styles (see photo) and four handing configurations:
- LH: Left Hand - from key side, hinges are on your left and the door swings away from you.
- RH: Right Hand - from key side, hinges are on your right and the door swings away from you.
- LHR: Left Hand Reverse - from key side, hinges are on your left and the door swings toward you.
- RHR: Right Hand Reverse - from key side, hinges are on your right and the door swings toward you.
Features
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
- Windstorm Resistant
- 12 ga. Heavy Duty Alloy Steel Case
- Single Cam for All Locking Functions
- Four Compression Springs Eliminate Sagging Levers
- Independent Single Retractor Hub
- Stainless Steel Stop Works, Deadbolt, Latchbolt, Deadlatch and Armor Plate
Specs
- FOR DOORS: 1-3/4"
- BACKSET: 2-3/4"
- CASE: 12-gauge cold rolled steel mechanism, dichromated for corrosion resistance
- ARMOR FRONT: Beveled 1/8" on 2"
- STRIKE: Handed Curved Lip Strike
- LATCHBOLT: 3/4" Throw, Investment Cast Stainless Steel, Anti-friction
- DEADBOLT: 1" Throw, Investment Cast Stainless Steel
- TRIM: Stainless steel escutcheon and levers
- KEYS: Two (2) per Lock
- KEYWAYS: SCC standard (Schlage C Compatible)
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
INSTRUCTIONS & TEMPLATES
PDQ Mortise Lock - MR116 Entrance/Office-Single Cylinder no deadbolt
$375.00
The PDQ MR Series Mortise Lock is a Grade 1 commercial door lock made in the USA. The J Wide Series Trim covers previous fastener holes when replacing other brands of mortise lock.
The MR116 is an Entrance/Office function lock, where the door is unlocked by a key from the outside when the outer lever is locked by a turn-button on the inside lever. The inside lever is always unlocked.
- Latchbolt operated by lever from either side
- Toggle locks/unlocks outside lever
- Key outside retracts latchbolt
- Auxiliary latch deadlocks latchbolt
We also offer the MR Series Mortise Lock in several other functions - Classroom, Privacy, Apartment/Corridor, Storeroom and Passage. Compare Functions.
We carry four lever styles (see photo) and four handing configurations:
- LH: Left Hand - from key side, hinges are on your left and the door swings away from you.
- RH: Right Hand - from key side, hinges are on your right and the door swings away from you.
- LHR: Left Hand Reverse - from key side, hinges are on your left and the door swings toward you.
- RHR: Right Hand Reverse - from key side, hinges are on your right and the door swings toward you.
Features
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
- Windstorm Resistant
- 12 ga. Heavy Duty Alloy Steel Case
- Single Cam for All Locking Functions
- Four Compression Springs Eliminate Sagging Levers
- Independent Single Retractor Hub
- Stainless Steel Stop Works, Deadbolt, Latchbolt, Deadlatch and Armor Plate
Specs
- FOR DOORS: 1-3/4"
- BACKSET: 2-3/4"
- CASE: 12-gauge cold rolled steel mechanism, dichromated for corrosion resistance
- ARMOR FRONT: Beveled 1/8" on 2"
- STRIKE: Handed Curved Lip Strike
- LATCHBOLT: 3/4" Throw, Investment Cast Stainless Steel, Anti-friction
- DEADBOLT: 1" Throw, Investment Cast Stainless Steel
- TRIM: Stainless steel escutcheon and levers
- KEYS: Two (2) per Lock
- KEYWAYS: SCC standard (Schlage C Compatible)
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
INSTRUCTIONS & TEMPLATES
PDQ Mortise Lock - MR126 Passage
$259.50
The PDQ MR Series Mortise Lock is a Grade 1 commercial door lock made in the USA. The J Wide Series Trim covers previous fastener holes when replacing other brands of mortise lock.
The MR126 is a Passage function lock, where the latch bolt is operated by the lever from either side at all times. There is no locking function.
- Non keyed
- Latchbolt is operated by lever from either side
We also offer the MR Series Mortise Lock in several other functions - Entrance/Office, Classroom, Privacy, Apartment/Corridor, and Storeroom. Compare Functions.
We carry four lever styles (see photo) and four handing configurations:
- LH: Left Hand - from key side, hinges are on your left and the door swings away from you.
- RH: Right Hand - from key side, hinges are on your right and the door swings away from you.
- LHR: Left Hand Reverse - from key side, hinges are on your left and the door swings toward you.
- RHR: Right Hand Reverse - from key side, hinges are on your right and the door swings toward you.
Features
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
- Windstorm Resistant
- 12 ga. Heavy Duty Alloy Steel Case
- Single Cam for All Locking Functions
- Four Compression Springs Eliminate Sagging Levers
- Independent Single Retractor Hub
- Stainless Steel Stop Works, Deadbolt, Latchbolt, Deadlatch and Armor Plate
Specs
- FOR DOORS: 1-3/4"
- BACKSET: 2-3/4"
- CASE: 12-gauge cold rolled steel mechanism, dichromated for corrosion resistance
- ARMOR FRONT: Beveled 1/8" on 2"
- STRIKE: Handed Curved Lip Strike
- LATCHBOLT: 3/4" Throw, Investment Cast Stainless Steel, Anti-friction
- DEADBOLT: 1" Throw, Investment Cast Stainless Steel
- TRIM: Stainless steel escutcheon and levers
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
INSTRUCTIONS & TEMPLATES
PDQ Mortise Lock - MR148 Classroom-Single Cylinder no deadbolt
$375.00
The PDQ MR Series Mortise Lock is a Grade 1 commercial door lock made in the USA. The J Wide Series Trim covers previous fastener holes when replacing other brands of mortise lock.
The MR148 is a Classroom function lock, where the latch bolt is operated by a lever on either side EXCEPT when the outside lever is locked from the outside by a key.
- Latchbolt operated by lever from either side
- Key outside retracts latchbolt
- Inside lever always free
- Auxiliary latch deadlocks latchbolt
We also offer the MR Series Mortise Lock in several other functions - Entrance/Office, Privacy, Apartment/Corridor, Storeroom and Passage. Compare Functions.
We carry four lever styles (see photo) and four handing configurations:
- LH: Left Hand - from key side, hinges are on your left and the door swings away from you.
- RH: Right Hand - from key side, hinges are on your right and the door swings away from you.
- LHR: Left Hand Reverse - from key side, hinges are on your left and the door swings toward you.
- RHR: Right Hand Reverse - from key side, hinges are on your right and the door swings toward you.
Features
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
- Windstorm Resistant
- 12 ga. Heavy Duty Alloy Steel Case
- Single Cam for All Locking Functions
- Four Compression Springs Eliminate Sagging Levers
- Independent Single Retractor Hub
- Stainless Steel Stop Works, Deadbolt, Latchbolt, Deadlatch and Armor Plate
Specs
- FOR DOORS: 1-3/4"
- BACKSET: 2-3/4"
- CASE: 12-gauge cold rolled steel mechanism, dichromated for corrosion resistance
- ARMOR FRONT: Beveled 1/8" on 2"
- STRIKE: Handed Curved Lip Strike
- LATCHBOLT: 3/4" Throw, Investment Cast Stainless Steel, Anti-friction
- DEADBOLT: 1" Throw, Investment Cast Stainless Steel
- TRIM: Stainless steel escutcheon and levers
- KEYS: Two (2) per Lock
- KEYWAYS: SCC standard (Schlage C Compatible)
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
INSTRUCTIONS & TEMPLATES
PDQ Mortise Lock - MR162 Apartment/Corridor-Single Cylinder with deadbolt
$375.00
The PDQ MR Series Mortise Lock is a Grade 1 commercial door lock made in the USA. The J Wide Series Trim covers previous fastener holes when replacing other brands of mortise lock.
The MR162 is an Apartment/Corridor function lock:
- Latchbolt operated by lever from either side
- Toggle locks/unlocks outside lever
- Key outside retracts latchbolt
- Key outside extends/retracts deadbolt
- Thumbturn inside extends/retracts deadbolt
- Inside lever simultaneously retracts latchbolt and deadbolt
- Auxiliary latch deadlocks latchbolt
We also offer the MR Series Mortise Lock in several other functions - Entrance/Office, Classroom, Privacy, Storeroom and Passage. Compare Functions.
We carry four lever styles (see photo) and four handing configurations:
- LH: Left Hand - from key side, hinges are on your left and the door swings away from you.
- RH: Right Hand - from key side, hinges are on your right and the door swings away from you.
- LHR: Left Hand Reverse - from key side, hinges are on your left and the door swings toward you.
- RHR: Right Hand Reverse - from key side, hinges are on your right and the door swings toward you.
Features
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
- Windstorm Resistant
- 12 ga. Heavy Duty Alloy Steel Case
- Single Cam for All Locking Functions
- Four Compression Springs Eliminate Sagging Levers
- Independent Single Retractor Hub
- Stainless Steel Stop Works, Deadbolt, Latchbolt, Deadlatch and Armor Plate
Specs
- FOR DOORS: 1-3/4"
- BACKSET: 2-3/4"
- CASE: 12-gauge cold rolled steel mechanism, dichromated for corrosion resistance
- ARMOR FRONT: Beveled 1/8" on 2"
- STRIKE: Handed Curved Lip Strike
- LATCHBOLT: 3/4" Throw, Investment Cast Stainless Steel, Anti-friction
- DEADBOLT: 1" Throw, Investment Cast Stainless Steel
- TRIM: Stainless steel escutcheon and levers
- KEYS: Two (2) per Lock
- KEYWAYS: SCC standard (Schlage C Compatible)
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
INSTRUCTIONS & TEMPLATES
PDQ Mortise Lock - MR176 Privacy
$278.00
The PDQ MR Series Mortise Lock is a Grade 1 commercial door lock made in the USA. The J Wide Series Trim covers previous fastener holes when replacing other brands of mortise lock.
The MR176 is a Privacy function lock featuring thumbturn locking. The lock can be opened from the outside with a coin. The inside push button can be released by turning the inside lever.
- Non keyed
- Latchbolt operated by lever from either side
- Emergency coin turn outside unlocks outside lever
- Thumbturn inside locks/unlocks outside lever
- Closing door unlocks outside lever
- Rotating inside lever unlocks outside lever
We also offer the MR Series Mortise Lock in several other functions - Entrance/Office, Classroom, Apartment/Corridor, Storeroom and Passage. Compare Functions.
We carry four lever styles (see photo) and four handing configurations:
- LH: Left Hand - from key side, hinges are on your left and the door swings away from you.
- RH: Right Hand - from key side, hinges are on your right and the door swings away from you.
- LHR: Left Hand Reverse - from key side, hinges are on your left and the door swings toward you.
- RHR: Right Hand Reverse - from key side, hinges are on your right and the door swings toward you.
Features
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
- Windstorm Resistant
- 12 ga. Heavy Duty Alloy Steel Case
- Single Cam for All Locking Functions
- Four Compression Springs Eliminate Sagging Levers
- Independent Single Retractor Hub
- Stainless Steel Stop Works, Deadbolt, Latchbolt, Deadlatch and Armor Plate
Specs
- FOR DOORS: 1-3/4"
- BACKSET: 2-3/4"
- CASE: 12-gauge cold rolled steel mechanism, dichromated for corrosion resistance
- ARMOR FRONT: Beveled 1/8" on 2"
- STRIKE: Handed Curved Lip Strike
- LATCHBOLT: 3/4" Throw, Investment Cast Stainless Steel, Anti-friction
- DEADBOLT: 1" Throw, Investment Cast Stainless Steel
- TRIM: Stainless steel escutcheon and levers
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
INSTRUCTIONS & TEMPLATES
PDQ MRS Electronic Mortise Lock — Spirit Series (PIN/RFID/Mobile)
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
Grade 1 Electronic Mortise Lock with Mobile, RFID & PIN Credentials, Battery-Powered, Field Reversible, 2-3/4" Backset, Standalone (Spirit Series — MRS)
PDQ’s MRS brings wireless, app-managed access control to a heavy-duty mortise chassis. Support for smartphone mobile keys, RFID cards/fobs, and optional keypad PINs means fewer keys to manage. Installs into a standard mortise prep—no panel wiring required—then configure users, schedules, and audit history in the Spirit app.
- VendorPDQ Locks
- ManufacturerPDQ Industries
- Series / ModelSpirit — MRS Electronic Mortise
- Example SKUMRS-SP-116-PHL-SJ-626-KIL
- GradeANSI/BHMA Grade 1 mortise chassis
- ListingsUL 10C (per MR chassis); ADA; FCC Part 15
- Unit of MeasureEach
- OriginAssembled in USA
- InstallationStandard mortise prep; no door wiring
- Power4 × AA alkaline (interior battery pack)
- Backset2-3/4"
- Door Thickness1-3/4" std (2", 2-1/4" optional)
- HandingNon-handed; field reversible
-
626 — Satin Chrome (US26D)
-
622 — Flat Black (US19)
-
613E — Dark Oxidized Satin Bronze (equivalent to US10B)
*606 Satin Brass (US4) available on request.
- CredentialsPIN keypad, RFID, Mobile (Bluetooth/NFC)
- ProgrammingPDQ Spirit App (device-based management)
- Audit / UsersEvent logging; local users via app
- Cylinder OptionsKIL (std), SFIC 6/7-pin, UL437 high-security
- EnvironmentInterior/Exterior; low-battery alerts
- ChassisBuilt on MR Grade 1 mortise platform
Use case: Unit entries and commercial openings needing mobile/RFID/PIN access without pulling wire. Configure schedules, passage/privacy, and audit history in the Spirit app.
- No panel wiring or power transfer
- Mobile, RFID, and PIN support
- Field-reversible handing; serviceable battery pack
- Heavy-duty MR mortise hardware
| Mortise Hardware (MR) — Product Page | PDQ MR Mortise Lock (platform details) |
| MR Series — Handing & Setup Video | YouTube |
| Spirit App — Add a Device | YouTube |
| Spirit App — Users & Credentials | YouTube |
| Spirit App — Sign Up | YouTube |
| Spirit Series — Brochure | PDQ Product Literature (Spirit brochure) |
Installation Difficulty
Level 4 — Advanced Pro: Precise mortise templating/handing; alignment & adjustments likely; no building wiring but trade experience strongly recommended.
PDQ Offset Pull Handle
$66.12
The PDQ 9E Series Offset Pull Handle is neat and stylish in appearance. This pull Handle is suited to many different door applications in commercial and residential environments.
Specs
- SIZE: 10"
- PROJECTION: .3-1/4"
- OVERALL LENGTH: 11"
- CLEARANCE: 2-1/4"
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
INSTRUCTIONS & TEMPLATES
PDQ Offset Pull Handle & Push Bar Set
$292.56
The Offset Pull Handle and Push Bar are neat and stylish in appearance. Both are suited to many different door applications in commercial and residential environments.
The set includes the Offset Pull Handle and Push Bar.
Specs
- Offset Pull Handle 1" round 10" CTC
- Push Bar 1" round 33" CTC
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
INSTRUCTIONS & TEMPLATES
PDQ Pull Handle
$30.10
The PDQ 3 Series Round Straight Pull Door handle features an arched D shape, 2 mounting holes, 9" overall length. This compact sized, light weight, Round Straight Door Pull handle is suitable for office buildings, department stores, and supermarkets.
Specs
- SIZE: 8"
- PROJECTION: 3"
- OVERALL LENGTH: 9"
- CLEARANCE: 2"
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
INSTRUCTIONS & TEMPLATES
PDQ Push Plate
$25.00
Door push plates protect the wood of a door which closes automatically, usually on swinging doors or doors with a pull handle on one side. These PDQ 96 Series are faithfully recreated from classic designs and available in a variety of finishes to match your home's decor.
Minimum Order Quantity: 5 pieces.
Specs
- Mounting Fasteners: #6 x 5/8 OH PH SMS
- Material: Brass, Stainless Steel
- Size: 4"x16" / Thickness: 0.050"
- Standard Cutout for Cylinder: 1-1/4” DIA
- Standard Cutout for Thumbturn: 3/8" DIA
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
PDQ SDE Tubular Pushbutton Lock – PIN + Key Override (Spirit Series)
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
Electronic Interconnected Lock — Mobile/RFID/PIN Credentials, BLE 4.2/5.2 w/ AES-256, Quick Retrofit on Standard Preps, Spirit Series (CLS)
PDQ’s CLS is a wireless, app-managed interconnected lock for multifamily and light commercial entries. It drops into standard interconnected preps, supports smartphone mobile keys, RFID cards/fobs, and optional PIN keypad, and is managed with the PDQ Spirit app—no control panels or door wiring required.
- VendorPDQ
- ManufacturerPDQ Industries
- Series / ModelSpirit — CLS
- Unit of MeasureEach
- CredentialsSmartphone (BLE), RFID, PIN, Mechanical Key Override
- Comm / EncryptionBLE 4.2 / 5.2 • AES-256
- Cylinder OptionsConventional, SFIC, High-Security, UL437
- Door Thickness1-3/8″ to 1-3/4″
- Backset2-3/8″–2-3/4″ (adjustable)
- Power4 × AA alkaline (≈2 years typical)
- ModesStandalone or Online (app-managed)
- ListingsUL/cUL 10C 20-minute; ADA; FCC Part 15
- OriginAssembled in USA
- Warranty2-year Mechanical / 2-year Electronics
-
626 — Satin Chrome (US26D)
-
622 — Flat Black (US19)
-
613E — Dark Oxidized Satin Bronze (Equivalent)
*606 Satin Brass (US4) available on request.
- HandingField reversible
- PrepRetrofit on standard interconnected prep; see template OE-9710
- Reader TechMIFARE DESFire EV1/EV2/EV3/Light; Ultralight EV1/AES; Classic; Prox (opt.)
- SecurityAES-256 over BLE 4.2/5.2
- Environment-20 °C to 65 °C; 0–95% RH (non-condensing)
- CylindersConventional, SFIC, High-Security, UL437
Use case: Unit entries and light commercial openings needing mobile/RFID/PIN access without running wires. Manage schedules, passage/privacy modes, credentials, and audit history in the Spirit app.
- Quick retrofit—no panel wiring, no door power transfer
- App-configurable schedules, auto-lock, alerts, & audit logs
- Door obstruction alerts and local lockdown
- Works with common cylinders (Conventional, SFIC, UL437)
| Official Product Page | PDQ CLS — Interconnected Electronic Lock |
| Installation Instructions | OE-9704 (PDF) |
| Full-Scale Template | OE-9710 (PDF) |
| Spirit Series Brochure | Specs • Finishes • How-to-Order (PDF) |
Installation Difficulty
Level 3 — Pro Starter: Trade basics recommended; precise templating and alignment; door/frame adjustments likely; no building wiring.
PDQ SDS Electronic Cylindrical Lock (Spirit Series)
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
Electronic Cylindrical Lock — Mobile/RFID/PIN Credentials, No-Wires Install, Adjustable 2-3/8"–2-3/4" Backset, 1-3/8"–1-3/4" Doors, Grade 2, Spirit Series (SDS)
PDQ’s SDS brings modern, app-managed access to interior commercial and multifamily openings without running wires. Choose keypad+RFID or reader-only fronts, pair in minutes over BLE, and manage schedules, users, and audit history with the PDQ Spirit app.
- VendorPDQ
- Series / ModelSpirit — SDS
- CredentialsSmartphone (BLE) • RFID • PIN (keypad models) • Mechanical Key
- Exterior TypesKeypad + RFID • RFID Reader Only
- Cylinder / KeywaysConventional (KIL) • SFIC • High Security • UL 437
- BacksetAdjustable 2-3/8" or 2-3/4" (5" optional)
- Door Thickness1-3/8" to 1-3/4"
- Power4 × AA alkaline (≈2 years typical) or 5V DC
- Comms / SecurityBluetooth® Low Energy (BLE 4.2 / 5.2) • AES-256
- RFID Compat.MIFARE DESFire EV1/EV2/EV3/Light • Ultralight EV1/AES • Classic • Prox (opt.)
- CertificationANSI/BHMA Grade 2 • UL/cUL 10C (20-minute) • ADA • FCC Part 15
- Warranty / Origin2-yr Mechanical • 2-yr Electronics • Assembled in USA
-
626 — Satin Chrome (US26D)
-
622 — Matte Black (US19)
-
613E — Dark Oxidized Satin Bronze (US10B equiv.)
*606 Satin Brass (US4) available by request.
- PlatformBuilt on PDQ SD Grade-2 cylindrical chassis
- EnvironmentInterior / light exterior; basic weather resistance
- FunctionsPassage, storeroom/entry, classroom security w/ schedules
- SoftwarePDQ Spirit app (iOS) for provisioning, users, schedules, logs
- Audit & AlertsEvent logs, door-obstruction alerts, battery status
- Strikes (Std)ASA 4-7/8" × 1-1/4" • T-Strike • Full-Lip
Overview: The SDS adds app-driven access control to interior doors without pulling wire. Pick the Keypad + RFID exterior for fast PIN entry plus mobile/RFID credentials, or the clean RFID Reader Only front for fob and mobile-key access. A Grade-2 cylindrical chassis keeps installs simple (adjustable backset, standard strikes), while the Spirit app handles users, schedules, and audit trails.
- No-wires setup; pairs over BLE in the Spirit app
- Mobile key, RFID, and (on keypad models) PIN code access
- Configurable schedules and passage modes; local audit trails
- ANSI 161 door prep with through-bolts; retrofit friendly
| Product Page | PDQ SDS — Electronic Cylindrical Lock |
| Installation | SDS Installation Instructions (88328 R2) |
| Template | Full-Scale Door & Strike Template (OE-9709) |
| Spirit Brochure | PDQ Spirit Series Overview (SDS page) |
Installation Difficulty
Level 2 — Skilled DIY / Light Pro: Standard cylindrical door prep with through-bolts; careful alignment and basic door hardware tools required; no building wiring.
PDQ Universal Dome Stop
$11.00
This floor mounted Dome Door Stop helps keep doors from hitting walls. A fashionable yet functional addition to a room's decor.This PDQ Dome Stops eliminates the need to determine requirement for traditional low or high dome stop - one stop for all applications.
Minimum Order Quantity: 5 pieces.
Features
- For doors with thresholds or undercut doors
Specs
- MATERIAL: Solid cast brass with bumper
- COMPLIANCES: ANSI/BHMA A156.16, TYPES L02141 (for plastic anchor), L20161 (for lead anchor)
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
PDQ Wall Stop-Concave Bumper
$6.30
The PDQ 102 Concave wall stop is ideal for residential and commercial applications. Protects walls from damage that can occur from door locks.
Minimum Order Quantity: 10 pieces.
Features
- Concealed Mounting
- Concave Bumper
- Backplate prevents damage to wall
Specs
- MATERIAL: Wrought brass, bronze, and stainless steel with bumper
- COMPLIANCES: ANSI/BHMA A156.16, TYPE L02251
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
PDQ Wall Stop-Convex Bumper
$6.30
The PDQ Convex wall stop bumper is ideal for residential and commercial applications. Protects walls from damage that can occur from door locks.
Minimum Order Quantity: 10 pieces.
Features
- Concealed Mounting
- Convex Bumper
- Backplate prevents damage to wall
Specs
- MATERIAL: Wrought brass, bronze, and stainless steel with bumper
- COMPLIANCES: ANSI/BHMA A156.16, TYPE L02251
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
Select Continuous Hinges - 83" Heavy Duty - Wide Throw
$270.36
Concealed hinge with wide throw for clearance of brick moldings or special door/frame designs.
Select Products SL40 Wide Throw Continuous Hinges can be used on new installations or to replace worn-out or broken hinges. They are stronger than pivots and distribute the weight of a door evenly. Aesthetically pleasing, they are made in Michigan and guaranteed for the life of the opening.
Features
- Heavy Duty:
- up to 200 lb., high-frequency (more than 25 opens/closes per day and/or abused doors - ones that often get slammed against a stop, operate in a school, etc.)
- up to 400 lb., medium-frequency (10 to 24 opens/closes per day)
- up to 600 lb., low-frequency (10 opens/closes per day or less)
- Frame leaf covers butt hinge preps
- Flush mounted (no door inset)
- For 1-3/4" doors
- SL40 HD geared continuous hinges are BHMA Grade 1 certified.
Finishes
Dark Bronze 710/313AN
Clear Aluminum 673/US92
Installation Challenge Level
Easy
Anyone who can read instructions and use a screwdriver can install this product.
Instructions & Templates
Company Info
Resources
Why Buy From Us?
Huge Inventory
Huge Inventory
No Hassle Returns
Satisfaction
Guaranteed
Guaranteed
News & Updates
Sign up to get the latest on sales, new releases and more …
