001
Air Louvers 700A Door Louver 12" x 12"
$128.10
Two Rows of Inverted Split "Y" Blades Louver with Two-Piece Design for Wood or Metal Doors.
Features
- Free Flow Area: 50% free area
Specs
- Material: 18 gauge CRS frame and blades
- Construction: Louvers & Frame: 2 rows of inverted split "Y" blades at 1" intervals are attached by interlocking construction to the 3/4" deep welded frame. 1-1/4" trim, with mitered and welded corners and countersunk mounting holes. Non-vision Construction. Louver frame is screwed into door from 2 sides.
- Door: Minimum 1-3/8" thick door
- Fasteners: Phillips head screws #8 x 3/4"
Finishes
Mineral Bronze Powder Coat Finish
Installation Challenge Level
Challenging
Recommended for Experienced Installers, but it's not rocket science.
Instructions & Files
Air Louvers 700A Door Louver 18" x 12"
$138.00
Two Rows of Inverted Split "Y" Blades Louver with Two-Piece Design for Wood or Metal Doors.
Features
- Free Flow Area: 50% free area
Specs
- Material: 18 gauge CRS frame and blades
- Construction: Louvers & Frame: 2 rows of inverted split "Y" blades at 1" intervals are attached by interlocking construction to the 3/4" deep welded frame. 1-1/4" trim, with mitered and welded corners and countersunk mounting holes. Non-vision Construction. Louver frame is screwed into door from 2 sides.
- Door: Minimum 1-3/8" thick door
- Fasteners: Phillips head screws #8 x 3/4"
Finishes
Mineral Bronze Powder Coat Finish
Installation Challenge Level
Challenging
Recommended for Experienced Installers, but it's not rocket science.
Instructions & Files
Air Louvers 700A Door Louver 24" x 12"
$154.50
Two Rows of Inverted Split "Y" Blades Louver with Two-Piece Design for Wood or Metal Doors.
Features
- Free Flow Area: 50% free area
Specs
- Material: 18 gauge CRS frame and blades
- Construction: Louvers & Frame: 2 rows of inverted split "Y" blades at 1" intervals are attached by interlocking construction to the 3/4" deep welded frame. 1-1/4" trim, with mitered and welded corners and countersunk mounting holes. Non-vision Construction. Louver frame is screwed into door from 2 sides.
- Door: Minimum 1-3/8" thick door
- Fasteners: Phillips head screws #8 x 3/4"
Finishes
Mineral Bronze Powder Coat Finish
Installation Challenge Level
Challenging
Recommended for Experienced Installers, but it's not rocket science.
Instructions & Files
Air Louvers 700A Door Louver 24" x 24"
$213.90
Two Rows of Inverted Split "Y" Blades Louver with Two-Piece Design for Wood or Metal Doors.
AVAILABILITY: CALL FOR SHIPPING
Features
- Free Flow Area: 50% free area
Specs
- Material: 18 gauge CRS frame and blades
- Construction: Louvers & Frame: 2 rows of inverted split "Y" blades at 1" intervals are attached by interlocking construction to the 3/4" deep welded frame. 1-1/4" trim, with mitered and welded corners and countersunk mounting holes. Non-vision Construction. Louver frame is screwed into door from 2 sides.
- Door: 1-3/4" thick door
- Fasteners: Phillips head screws #8 x 3/4"
Finishes
Mineral Bronze Powder Coat Finish
Installation Challenge Level
Challenging
Recommended for Experienced Installers, but it's not rocket science.
Instructions & Files
Air Louvers Lite Kit with Tempered Glass 12" x 12"
$135.00
Air Louvers Beveled Vision Lite VLFEZ Temp Pak
For Offices, Schools, Hospitals and more, Air Louvers Vision Lites are made of high quality material for long lasting durability and dependability. This kit's tempered glass is used to retain and direct heat preventing the spread of fire.
Features
- Complete Individually-Packaged Vision Lite Kit for 1-3/4" Doors
- Countersunk mounting holes leaves corridor side of frame free of fasteners for aesthetic and security purposes
- Tempered Glass is CAT II Impact-rated
- Glazing Tape Applied
Specs
- 20 gauge CRS frame
- 1-1/4" trim, with mitered and welded corners
- Continuous glass retainer
- Countersunk mounting holes
- #8 x 1" flathead phillips SMS included
- When installed in properly rated and approved fire door, ratings up to 3 hours can be achieved, depending on the glazing used. See glazing ratings for maximum exposed area. Tested and Listed for UL 10C and Criteria of UBC 7-2 Positive Pressure.
Finishes
Mineral Bronze Powder Coat Finish
Installation Challenge Level
Challenging
Recommended for Experienced Installers, but it's not rocket science.
Instructions & Files
Air Louvers Lite Kit with Tempered Glass 6" x 27"
$176.50
Air Louvers Beveled Vision Lite VLFEZ Temp Pak
For Offices, Schools, Hospitals and more, Air Louvers Vision Lites are made of high quality material for long lasting durability and dependability. This kit's tempered glass is used to retain and direct heat preventing the spread of fire.
Features
- Complete Individually-Packaged Vision Lite Kit for 1-3/4" Doors
- Countersunk mounting holes leaves corridor side of frame free of fasteners for aesthetic and security purposes
- Tempered Glass is CAT II Impact-rated
- Glazing Tape Applied
Specs
- 20 gauge CRS frame
- 1-1/4" trim, with mitered and welded corners
- Continuous glass retainer
- Countersunk mounting holes
- #8 x 1" flathead phillips SMS included
- When installed in properly rated and approved fire door, ratings up to 3 hours can be achieved, depending on the glazing used. See glazing ratings for maximum exposed area. Tested and Listed for UL 10C and Criteria of UBC 7-2 Positive Pressure.
Finishes
Mineral Bronze Powder Coat Finish
Installation Challenge Level
Challenging
Recommended for Experienced Installers, but it's not rocket science.
Instructions & Files
Air Louvers Vision Lite Kit 12" x 12"
$91.50
Air Louvers Beveled Vision Lite Kit VLFEZ
For Offices, Schools, Hospitals And more, Air Louvers Vision Lites are made of high quality material for long lasting durability and dependability. Does not include glazing. For kits including tempered glass, see Air Louvers Beveled Vision Lite VLFEZ Temp Pak.
Features
- Vision Lite Kit for 1-3/4" Doors
- Countersunk mounting holes leaves corridor side of frame free of fasteners for aesthetic and security purposes
Specs
- 20 gauge CRS frame
- 1-1/4" trim, with mitered and welded corners
- Continuous glass retainer
- Countersunk mounting holes
- #8 x 1" flathead phillips SMS included
- When installed in properly rated and approved fire door, ratings up to 3 hours can be achieved, depending on the glazing used. See glazing ratings for maximum exposed area. Tested and Listed for UL 10C and Criteria of UBC 7-2 Positive Pressure.
Finishes
Mineral Bronze Powder Coat Finish
Installation Challenge Level
Challenging
Recommended for Experienced Installers, but it's not rocket science.
Instructions & Files
Air Louvers Vision Lite Kit 24" x 30"
$133.60
Air Louvers Beveled Vision Lite Kit VLFEZ
For Offices, Schools, Hospitals And more, Air Louvers Vision Lites are made of high quality material for long lasting durability and dependability. Does not include glazing. For kits including tempered glass, see Air Louvers Beveled Vision Lite VLFEZ Temp Pak.
Features
- Vision Lite Kit for 1-3/4" Doors
- Countersunk mounting holes leaves corridor side of frame free of fasteners for aesthetic and security purposes
Specs
- 20 gauge CRS frame
- 1-1/4" trim, with mitered and welded corners
- Continuous glass retainer
- Countersunk mounting holes
- #8 x 1" flathead phillips SMS included
- When installed in properly rated and approved fire door, ratings up to 3 hours can be achieved, depending on the glazing used. See glazing ratings for maximum exposed area. Tested and Listed for UL 10C and Criteria of UBC 7-2 Positive Pressure.
Finishes
Mineral Bronze Powder Coat Finish
Installation Challenge Level
Challenging
Recommended for Experienced Installers, but it's not rocket science.
Instructions & Files
Air Louvers Vision Lite Kit 6" x 27"
$116.00
Air Louvers Beveled Vision Lite Kit VLFEZ
For Offices, Schools, Hospitals And more, Air Louvers Vision Lites are made of high quality material for long lasting durability and dependability. Does not include glazing. For kits including tempered glass, see Air Louvers Beveled Vision Lite VLFEZ Temp Pak.
Features
- Vision Lite Kit for 1-3/4" Doors
- Countersunk mounting holes leaves corridor side of frame free of fasteners for aesthetic and security purposes
Specs
- 20 gauge CRS frame
- 1-1/4" trim, with mitered and welded corners
- Continuous glass retainer
- Countersunk mounting holes
- #8 x 1" flathead phillips SMS included
- When installed in properly rated and approved fire door, ratings up to 3 hours can be achieved, depending on the glazing used. See glazing ratings for maximum exposed area. Tested and Listed for UL 10C and Criteria of UBC 7-2 Positive Pressure.
Finishes
Mineral Bronze Powder Coat Finish
Installation Challenge Level
Challenging
Recommended for Experienced Installers, but it's not rocket science.
Instructions & Files
Company Info
Resources
Why Buy From Us?
Huge Inventory
Huge Inventory
No Hassle Returns
Satisfaction
Guaranteed
Guaranteed
News & Updates
Sign up to get the latest on sales, new releases and more …
