HES 5000 Series Electric Strike

$203.00

The 5000 series is a compact, high performance electric strike designed for low profile openings where there is limited space behind the jamb. Its strength is derived from a unique keeper pin locking design, enabling the 5000 to exceed the ratings of the frame, door and locking hardware. This field selectable fail secure/fail safe unit is easy to install and accommodates latch bolts up to 5/8" throw.

Features

Tamper resistant
Static strength 1,500 lbs.
Dynamic strength 70 ft-lbs.
Endurance 500,000 cycles
Field selectable fail secure/ fail safe
Dual voltage 12 or 24 VDC/VAC
Non-handed
Internally mounted solenoid
Accommodates 1/2" - 5/8" latchbolt (5/8" with 1/8" door gap)
Strike body depth 1-1/16"
Plug-in connector
Trim enhancer included
Five year limited warranty

Specs

UL 1034 burglary-resistant listed and suitable for outdoor use
UL 294 (6th Edition) listed
ANSI/BHMA A156.31, Grade 1
MEA New York City accepted
Patent #5,934,720

Finishes

Satin Stainless Steel 630/US32D

Installation Challenge Level

Easy
Anyone who can read instructions and use basic tools can install this product.

Collections: 001, Electric Strikes

Category: Access Control, Electric Strikes, HES Products

Type: Electric Strike

+ Quick Shop

7100 Series Adams Rite Electric Strikes

$213.00

Electric Strike, Electrically Unlocked (Fail Secure), For Hollow Metal or Wood Applications, 4-7/8" x 1-1/4" Flat Faceplate with Square Corners, 12VAC, Satin Aluminum Clear Anodized

Product Specs
Vendor Assa Abloy
Manufacturer Adams Rite
SKU 7170-340-628-00
UID ADA1007170340628
Installation Commercial
Unit of Measure Each
Application Aluminum, Metal or Wood Applications

Finish
628/US28
Finish Description Satin Aluminum Clear Anodized
Finish Family Matte Silver

Technical Specs
Function Fail Secure
Operating Voltage 12 VAC
Amp Draw 1.42 Amps
Faceplate Size 4-7/8" x 1-1/4"
Faceplate Shape Flat Face, Square Corners
Product Type Electric Strikes

7100 Electric Strikes

Designed for use with Adams Rite deadlatches or cylindrical locksets with 1/2" to 5/8" latchbolt projection.

For use in aluminum, hollow metal, or wood applications — remote electrical control of any door equipped with an Adams Rite 4500, 4700 (discontinued), or 4900 Deadlatch or cylindrical lockset with 1/2" [12.7 mm] to 5/8" [15.9 mm] latchbolt projection. Electrical actuation unlocks the keeper, releasing the latchbolt so the door may be opened without operating the latch itself.

Fail-Safe/Fail-Secure: Field convertible from one mode to the other. However, AC intermittent solenoid must not be used continuously in either.
Case: Approximately 1” x 3-3/8” x 1-5/8” deep.
Strike Lip: Basic 7100 strike has lip of proper length for 1-3/4” thick door that closes flush with jamb edge. Where door thickness or jamb shape differs from this standard relationship, lip extension kits are available, specified by last dash number. Not available on 7101.
Strike Opening: 5/8” x 1-7/16” x 1/2” deep. Bolt retainer jaw is stainless steel. Strike accepts bolt of any Adams Rite 4500, 4700 (discontinued), or 4900 Deadlatch or cylindrical latches.
Faceplate: Measures 1-1/4” x 4-7/8”. 7100 has flat faceplate; 7101 is radiused to match nose on inactive leaf in a pair of narrow stile glass doors. Available in a wide range of architectural finishes.
Voltage: Available in 12 or 24 volt AC and DC. DC continuous units are silent, AC intermittent units “buzz” on operation.

Catalogue.pdf

INSTALLATION CHALLENGE LEVEL

Easy
Anyone who can read instructions and use basic tools can install this product.

View full product details »