001
PDQ Kick Down
$8.50
The PDQ Kick-Down Door Stop flips down easily to hold a door open. This Door Stop does not interfere with door operation while in raised position and is easy to install.
Minimum Order Quantity: 5 pieces.
Features
- Bumper provides reliable grip on floor
Specs
- MATERIAL: Cast steel
- COMPLIANCES: ANSI/BHMA A156.16, TYPE L01382
Finishes
Aluminum Painted 689/SP28
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
PDQ Kick Plate
$85.00
Provides protection for the bottom of the door from scuffing due to foot traffic or cleaning maintenance. Recommended for all doors especially when using a door closer.
Specs
- MATERIAL: Stainless Steel, Brass, Aluminum
- THICKNESS: 0.050"
- MOUNTING FASTENERS: • #6 x 5/8 OH PH SMS
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
PDQ Manual Flushbolt for Metal Door
$14.50
Flush bolts are used to secure an inactive door on a pair of double doors. PDQ 93170 series flush bolts are manual flush bolts for hollow metal doors. We have brass flush bolts, and steel flush bolts. PDQ 93170 flush bolts for hollow metal doors. Also please note that we also carry door coordinators if needed. We carry different types of flush bolt hardware for various installations.
Features
- Compatible with ANSI/BHMA 156.115 door and frame prep
- 3/4" slide bolt throw, 3⁄4" backset.
- 12" rod length (center of face to bolt end - retracted).
- 1-1⁄ 2" adjustable slide bolt.
- PDQ # 909 Dust Proof Strike recommended to prevent dirt from accumulating and clogging the bottom strike (ordered separately)
Specs
- BASE MATERIAL: Brass and steel
- FASTENERS: 16 ea. #8 x 3⁄4" FH combo screws
- FACE PLATE: 1" x 6-3⁄4"
- STRIKE: 15⁄16" x 2-1/4"
- GUIDE: 1" x 2"
- CERTIFICATIONS, LISTINGS, COMPLIANCES: Meets requirements of Buy American Act
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging
Recommended for Experienced Installers
Instructions & Templates
PDQ Mortise Lock - MR115 Storeroom
$257.00
The PDQ MR Series Mortise Lock is a Grade 1 commercial door lock made in the USA. The J Wide Series Trim covers previous fastener holes when replacing other brands of mortise lock.
The MR115 is a Storeroom function lock, where the latch bolt is operated by a key outside and the lever from the inside. The outside lever is rigid.
- Latchbolt operated by lever from inside
- Key outside retracts latchbolt
- Rigid outside lever
- Auxiliary latch deadlocks latchbolt
We also offer the MR Series Mortise Lock in several other functions - Entrance/Office, Classroom, Privacy, Apartment/Corridor, and Passage. Compare Functions.
We carry four lever styles (see photo) and four handing configurations:
- LH: Left Hand - from key side, hinges are on your left and the door swings away from you.
- RH: Right Hand - from key side, hinges are on your right and the door swings away from you.
- LHR: Left Hand Reverse - from key side, hinges are on your left and the door swings toward you.
- RHR: Right Hand Reverse - from key side, hinges are on your right and the door swings toward you.
Features
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
- Windstorm Resistant
- 12 ga. Heavy Duty Alloy Steel Case
- Single Cam for All Locking Functions
- Four Compression Springs Eliminate Sagging Levers
- Independent Single Retractor Hub
- Stainless Steel Stop Works, Deadbolt, Latchbolt, Deadlatch and Armor Plate
Specs
- FOR DOORS: 1-3/4"
- BACKSET: 2-3/4"
- CASE: 12-gauge cold rolled steel mechanism, dichromated for corrosion resistance
- ARMOR FRONT: Beveled 1/8" on 2"
- STRIKE: Handed Curved Lip Strike
- LATCHBOLT: 3/4" Throw, Investment Cast Stainless Steel, Anti-friction
- DEADBOLT: 1" Throw, Investment Cast Stainless Steel
- TRIM: Stainless steel escutcheon and levers
- KEYS: Two (2) per Lock
- KEYWAYS: SCC standard (Schlage C Compatible)
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
INSTRUCTIONS & TEMPLATES
PDQ Mortise Lock - MR116 Entrance/Office
$257.00
The PDQ MR Series Mortise Lock is a Grade 1 commercial door lock made in the USA. The J Wide Series Trim covers previous fastener holes when replacing other brands of mortise lock.
The MR116 is an Entrance/Office function lock, where the door is unlocked by a key from the outside when the outer lever is locked by a turn-button on the inside lever. The inside lever is always unlocked.
- Latchbolt operated by lever from either side
- Toggle locks/unlocks outside lever
- Key outside retracts latchbolt
- Auxiliary latch deadlocks latchbolt
We also offer the MR Series Mortise Lock in several other functions - Classroom, Privacy, Apartment/Corridor, Storeroom and Passage. Compare Functions.
We carry four lever styles (see photo) and four handing configurations:
- LH: Left Hand - from key side, hinges are on your left and the door swings away from you.
- RH: Right Hand - from key side, hinges are on your right and the door swings away from you.
- LHR: Left Hand Reverse - from key side, hinges are on your left and the door swings toward you.
- RHR: Right Hand Reverse - from key side, hinges are on your right and the door swings toward you.
Features
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
- Windstorm Resistant
- 12 ga. Heavy Duty Alloy Steel Case
- Single Cam for All Locking Functions
- Four Compression Springs Eliminate Sagging Levers
- Independent Single Retractor Hub
- Stainless Steel Stop Works, Deadbolt, Latchbolt, Deadlatch and Armor Plate
Specs
- FOR DOORS: 1-3/4"
- BACKSET: 2-3/4"
- CASE: 12-gauge cold rolled steel mechanism, dichromated for corrosion resistance
- ARMOR FRONT: Beveled 1/8" on 2"
- STRIKE: Handed Curved Lip Strike
- LATCHBOLT: 3/4" Throw, Investment Cast Stainless Steel, Anti-friction
- DEADBOLT: 1" Throw, Investment Cast Stainless Steel
- TRIM: Stainless steel escutcheon and levers
- KEYS: Two (2) per Lock
- KEYWAYS: SCC standard (Schlage C Compatible)
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
INSTRUCTIONS & TEMPLATES
PDQ Mortise Lock - MR126 Passage
$230.00
The PDQ MR Series Mortise Lock is a Grade 1 commercial door lock made in the USA. The J Wide Series Trim covers previous fastener holes when replacing other brands of mortise lock.
The MR126 is a Passage function lock, where the latch bolt is operated by the lever from either side at all times. There is no locking function.
- Non keyed
- Latchbolt is operated by lever from either side
We also offer the MR Series Mortise Lock in several other functions - Entrance/Office, Classroom, Privacy, Apartment/Corridor, and Storeroom. Compare Functions.
We carry four lever styles (see photo) and four handing configurations:
- LH: Left Hand - from key side, hinges are on your left and the door swings away from you.
- RH: Right Hand - from key side, hinges are on your right and the door swings away from you.
- LHR: Left Hand Reverse - from key side, hinges are on your left and the door swings toward you.
- RHR: Right Hand Reverse - from key side, hinges are on your right and the door swings toward you.
Features
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
- Windstorm Resistant
- 12 ga. Heavy Duty Alloy Steel Case
- Single Cam for All Locking Functions
- Four Compression Springs Eliminate Sagging Levers
- Independent Single Retractor Hub
- Stainless Steel Stop Works, Deadbolt, Latchbolt, Deadlatch and Armor Plate
Specs
- FOR DOORS: 1-3/4"
- BACKSET: 2-3/4"
- CASE: 12-gauge cold rolled steel mechanism, dichromated for corrosion resistance
- ARMOR FRONT: Beveled 1/8" on 2"
- STRIKE: Handed Curved Lip Strike
- LATCHBOLT: 3/4" Throw, Investment Cast Stainless Steel, Anti-friction
- DEADBOLT: 1" Throw, Investment Cast Stainless Steel
- TRIM: Stainless steel escutcheon and levers
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
INSTRUCTIONS & TEMPLATES
PDQ Mortise Lock - MR148 Classroom
$257.00
The PDQ MR Series Mortise Lock is a Grade 1 commercial door lock made in the USA. The J Wide Series Trim covers previous fastener holes when replacing other brands of mortise lock.
The MR148 is a Classroom function lock, where the latch bolt is operated by a lever on either side EXCEPT when the outside lever is locked from the outside by a key.
- Latchbolt operated by lever from either side
- Key outside retracts latchbolt
- Inside lever always free
- Auxiliary latch deadlocks latchbolt
We also offer the MR Series Mortise Lock in several other functions - Entrance/Office, Privacy, Apartment/Corridor, Storeroom and Passage. Compare Functions.
We carry four lever styles (see photo) and four handing configurations:
- LH: Left Hand - from key side, hinges are on your left and the door swings away from you.
- RH: Right Hand - from key side, hinges are on your right and the door swings away from you.
- LHR: Left Hand Reverse - from key side, hinges are on your left and the door swings toward you.
- RHR: Right Hand Reverse - from key side, hinges are on your right and the door swings toward you.
Features
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
- Windstorm Resistant
- 12 ga. Heavy Duty Alloy Steel Case
- Single Cam for All Locking Functions
- Four Compression Springs Eliminate Sagging Levers
- Independent Single Retractor Hub
- Stainless Steel Stop Works, Deadbolt, Latchbolt, Deadlatch and Armor Plate
Specs
- FOR DOORS: 1-3/4"
- BACKSET: 2-3/4"
- CASE: 12-gauge cold rolled steel mechanism, dichromated for corrosion resistance
- ARMOR FRONT: Beveled 1/8" on 2"
- STRIKE: Handed Curved Lip Strike
- LATCHBOLT: 3/4" Throw, Investment Cast Stainless Steel, Anti-friction
- DEADBOLT: 1" Throw, Investment Cast Stainless Steel
- TRIM: Stainless steel escutcheon and levers
- KEYS: Two (2) per Lock
- KEYWAYS: SCC standard (Schlage C Compatible)
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
INSTRUCTIONS & TEMPLATES
PDQ Mortise Lock - MR162 Apartment/Corridor
$260.00
The PDQ MR Series Mortise Lock is a Grade 1 commercial door lock made in the USA. The J Wide Series Trim covers previous fastener holes when replacing other brands of mortise lock.
The MR162 is an Apartment/Corridor function lock:
- Latchbolt operated by lever from either side
- Toggle locks/unlocks outside lever
- Key outside retracts latchbolt
- Key outside extends/retracts deadbolt
- Thumbturn inside extends/retracts deadbolt
- Inside lever simultaneously retracts latchbolt and deadbolt
- Auxiliary latch deadlocks latchbolt
We also offer the MR Series Mortise Lock in several other functions - Entrance/Office, Classroom, Privacy, Storeroom and Passage. Compare Functions.
We carry four lever styles (see photo) and four handing configurations:
- LH: Left Hand - from key side, hinges are on your left and the door swings away from you.
- RH: Right Hand - from key side, hinges are on your right and the door swings away from you.
- LHR: Left Hand Reverse - from key side, hinges are on your left and the door swings toward you.
- RHR: Right Hand Reverse - from key side, hinges are on your right and the door swings toward you.
Features
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
- Windstorm Resistant
- 12 ga. Heavy Duty Alloy Steel Case
- Single Cam for All Locking Functions
- Four Compression Springs Eliminate Sagging Levers
- Independent Single Retractor Hub
- Stainless Steel Stop Works, Deadbolt, Latchbolt, Deadlatch and Armor Plate
Specs
- FOR DOORS: 1-3/4"
- BACKSET: 2-3/4"
- CASE: 12-gauge cold rolled steel mechanism, dichromated for corrosion resistance
- ARMOR FRONT: Beveled 1/8" on 2"
- STRIKE: Handed Curved Lip Strike
- LATCHBOLT: 3/4" Throw, Investment Cast Stainless Steel, Anti-friction
- DEADBOLT: 1" Throw, Investment Cast Stainless Steel
- TRIM: Stainless steel escutcheon and levers
- KEYS: Two (2) per Lock
- KEYWAYS: SCC standard (Schlage C Compatible)
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
INSTRUCTIONS & TEMPLATES
PDQ Mortise Lock - MR176 Privacy
$239.00
The PDQ MR Series Mortise Lock is a Grade 1 commercial door lock made in the USA. The J Wide Series Trim covers previous fastener holes when replacing other brands of mortise lock.
The MR176 is a Privacy function lock featuring thumbturn locking. The lock can be opened from the outside with a coin. The inside push button can be released by turning the inside lever.
- Non keyed
- Latchbolt operated by lever from either side
- Emergency coin turn outside unlocks outside lever
- Thumbturn inside locks/unlocks outside lever
- Closing door unlocks outside lever
- Rotating inside lever unlocks outside lever
We also offer the MR Series Mortise Lock in several other functions - Entrance/Office, Classroom, Apartment/Corridor, Storeroom and Passage. Compare Functions.
We carry four lever styles (see photo) and four handing configurations:
- LH: Left Hand - from key side, hinges are on your left and the door swings away from you.
- RH: Right Hand - from key side, hinges are on your right and the door swings away from you.
- LHR: Left Hand Reverse - from key side, hinges are on your left and the door swings toward you.
- RHR: Right Hand Reverse - from key side, hinges are on your right and the door swings toward you.
Features
- Assembled in USA, meeting the requirements of the Buy American Act
- Lifetime Manufacturer's Limited Warranty
- Windstorm Resistant
- 12 ga. Heavy Duty Alloy Steel Case
- Single Cam for All Locking Functions
- Four Compression Springs Eliminate Sagging Levers
- Independent Single Retractor Hub
- Stainless Steel Stop Works, Deadbolt, Latchbolt, Deadlatch and Armor Plate
Specs
- FOR DOORS: 1-3/4"
- BACKSET: 2-3/4"
- CASE: 12-gauge cold rolled steel mechanism, dichromated for corrosion resistance
- ARMOR FRONT: Beveled 1/8" on 2"
- STRIKE: Handed Curved Lip Strike
- LATCHBOLT: 3/4" Throw, Investment Cast Stainless Steel, Anti-friction
- DEADBOLT: 1" Throw, Investment Cast Stainless Steel
- TRIM: Stainless steel escutcheon and levers
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
INSTRUCTIONS & TEMPLATES
PDQ Offset Pull Handle
$66.12
The PDQ 9E Series Offset Pull Handle is neat and stylish in appearance. This pull Handle is suited to many different door applications in commercial and residential environments.
Specs
- SIZE: 10"
- PROJECTION: .3-1/4"
- OVERALL LENGTH: 11"
- CLEARANCE: 2-1/4"
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
INSTRUCTIONS & TEMPLATES
PDQ Offset Pull Handle & Push Bar Set
$292.56
The Offset Pull Handle and Push Bar are neat and stylish in appearance. Both are suited to many different door applications in commercial and residential environments.
The set includes the Offset Pull Handle and Push Bar.
Specs
- Offset Pull Handle 1" round 10" CTC
- Push Bar 1" round 33" CTC
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
INSTRUCTIONS & TEMPLATES
PDQ Pull Handle
$30.10
The PDQ 3 Series Round Straight Pull Door handle features an arched D shape, 2 mounting holes, 9" overall length. This compact sized, light weight, Round Straight Door Pull handle is suitable for office buildings, department stores, and supermarkets.
Specs
- SIZE: 8"
- PROJECTION: 3"
- OVERALL LENGTH: 9"
- CLEARANCE: 2"
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
INSTRUCTIONS & TEMPLATES
PDQ Push Plate
$25.00
Door push plates protect the wood of a door which closes automatically, usually on swinging doors or doors with a pull handle on one side. These PDQ 96 Series are faithfully recreated from classic designs and available in a variety of finishes to match your home's decor.
Minimum Order Quantity: 5 pieces.
Specs
- Mounting Fasteners: #6 x 5/8 OH PH SMS
- Material: Brass, Stainless Steel
- Size: 4"x16" / Thickness: 0.050"
- Standard Cutout for Cylinder: 1-1/4” DIA
- Standard Cutout for Thumbturn: 3/8" DIA
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
PDQ Universal Dome Stop
$5.68
This floor mounted Dome Door Stop helps keep doors from hitting walls. A fashionable yet functional addition to a room's decor.This PDQ Dome Stops eliminates the need to determine requirement for traditional low or high dome stop - one stop for all applications.
Minimum Order Quantity: 5 pieces.
Features
- For doors with thresholds or undercut doors
Specs
- MATERIAL: Solid cast brass with bumper
- COMPLIANCES: ANSI/BHMA A156.16, TYPES L02141 (for plastic anchor), L20161 (for lead anchor)
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
PDQ Wall Stop-Concave Bumper
$4.00
The PDQ 102 Concave wall stop is ideal for residential and commercial applications. Protects walls from damage that can occur from door locks.
Minimum Order Quantity: 10 pieces.
Features
- Concealed Mounting
- Concave Bumper
- Backplate prevents damage to wall
Specs
- MATERIAL: Wrought brass, bronze, and stainless steel with bumper
- COMPLIANCES: ANSI/BHMA A156.16, TYPE L02251
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
PDQ Wall Stop-Convex Bumper
$4.00
The PDQ Convex wall stop bumper is ideal for residential and commercial applications. Protects walls from damage that can occur from door locks.
Minimum Order Quantity: 10 pieces.
Features
- Concealed Mounting
- Convex Bumper
- Backplate prevents damage to wall
Specs
- MATERIAL: Wrought brass, bronze, and stainless steel with bumper
- COMPLIANCES: ANSI/BHMA A156.16, TYPE L02251
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
Select Continuous Hinges - 83" Heavy Duty - Concealed
$169.94
Concealed mount - no mortise required.
Select Products SL24 Concealed Geared Continuous Hinges can be used on new installations or to replace worn-out or broken hinges. They are stronger than pivots and distribute the weight of a door evenly. Aesthetically pleasing, they are made in Michigan and guaranteed for the life of the opening.
Features
- Heavy Duty:
- up to 200 lb., high-frequency (more than 25 opens/closes per day and/or abused doors - ones that often get slammed against a stop, operate in a school, etc.)
- up to 400 lb., medium-frequency (10 to 24 opens/closes per day)
- up to 600 lb., low-frequency (10 opens/closes per day or less)
- Door edge protector
- Frame leaf covers butt hinge preps
- 1/16"door inset
- For 1-3/4" doors
- All SL24 geared continuous hinges are BHMA Grade 1 certified
Finishes
Dark Bronze 710/313AN
Clear Aluminum 673/US92
Installation Challenge Level
Easy
Anyone who can read instructions and use a screwdriver can install this product.
Instructions & Templates
Select Continuous Hinges - 83" Heavy Duty - Full Surface
$203.94
Surface mount on face of existing or new door and frame.
Select Products SL57 Full Surface Continuous Hinges can be used on new installations or to replace worn-out or broken hinges. They are stronger than pivots and distribute the weight of a door evenly. Aesthetically pleasing, they are made in Michigan and guaranteed for the life of the opening.
Features
- Heavy Duty:
- up to 200 lb., high-frequency (more than 25 opens/closes per day and/or abused doors - ones that often get slammed against a stop, operate in a school, etc.)
- up to 400 lb., medium-frequency (10 to 24 opens/closes per day)
- up to 600 lb., low-frequency (10 opens/closes per day or less)
- Fits narrow (7/8") frame face
- Tamper resistant, removable door leaf cover
- 1/16" door inset
- Standard barrel nuts accommodate 1-3/8" to 1-3/4" doors
- Long barrel nuts available for 2" to 2-1/4" doors
- All SL57 geared continuous hinges are BHMA Grade 1 certified
Finishes
Dark Bronze 710/313AN
Clear Aluminum 673/US92
Installation Challenge Level
Easy
Anyone who can read instructions and use a screwdriver can install this product.
Instructions & Templates
Select Continuous Hinges - 83" Heavy Duty - Half Surface
$210.92
Mounts on door face and frame rabbet.
Select Products SL54 Half Surface Continuous Hinges can be used on new installations or to replace worn-out or broken hinges. They are stronger than pivots and distribute the weight of a door evenly. Aesthetically pleasing, they are made in Michigan and guaranteed for the life of the opening.
Features
- Heavy Duty:
- up to 200 lb., high-frequency (more than 25 opens/closes per day and/or abused doors - ones that often get slammed against a stop, operate in a school, etc.)
- up to 400 lb., medium-frequency (10 to 24 opens/closes per day)
- up to 600 lb., low-frequency (10 opens/closes per day or less)
- Frame leaf covers butt hinge preps
- Tamper-resistant, removable door leaf cover
- 3/32" door inset
- For 1-3/4" doors
- Long barrel nuts available for 2" to 2-1/4" doors
- SL54 HD geared continuous hinges are BHMA Grade 1 certified.
Finishes
Dark Bronze 710/313AN
Clear Aluminum 673/US92
Installation Challenge Level
Easy
Anyone who can read instructions and use a screwdriver can install this product.
Instructions & Templates
Select Continuous Hinges - 83" Heavy Duty - Wide Throw
$270.36
Concealed hinge with wide throw for clearance of brick moldings or special door/frame designs.
Select Products SL40 Wide Throw Continuous Hinges can be used on new installations or to replace worn-out or broken hinges. They are stronger than pivots and distribute the weight of a door evenly. Aesthetically pleasing, they are made in Michigan and guaranteed for the life of the opening.
Features
- Heavy Duty:
- up to 200 lb., high-frequency (more than 25 opens/closes per day and/or abused doors - ones that often get slammed against a stop, operate in a school, etc.)
- up to 400 lb., medium-frequency (10 to 24 opens/closes per day)
- up to 600 lb., low-frequency (10 opens/closes per day or less)
- Frame leaf covers butt hinge preps
- Flush mounted (no door inset)
- For 1-3/4" doors
- SL40 HD geared continuous hinges are BHMA Grade 1 certified.
Finishes
Dark Bronze 710/313AN
Clear Aluminum 673/US92
Installation Challenge Level
Easy
Anyone who can read instructions and use a screwdriver can install this product.
Instructions & Templates
Select Continuous Hinges - 83" Standard Duty - Concealed
$144.20
Concealed mount - no mortise required.
Select Products SL24 Concealed Continuous Hinges can be used on new installations or to replace worn-out or broken hinges. They are stronger than pivots and distribute the weight of a door evenly. Aesthetically pleasing, they are made in Michigan and guaranteed for the life of the opening.
Features
- Standard Duty: up to 200 lb., medium-frequency (10 to 24 opens/closes per day)
- Door edge protector
- Frame leaf covers butt hinge preps
- 1/16"door inset
- For 1-3/4" doors
- All SL24 geared continuous hinges are BHMA Grade 1 certified
Finishes
Dark Bronze 710/313AN
Clear Aluminum 673/US92
Installation Challenge Level
Easy
Anyone who can read instructions and use a screwdriver can install this product.
Instructions & Templates
Select Continuous Hinges - 83" Standard Duty - Full Surface
$163.77
Surface mount on face of existing or new door and frame.
Select Products SL57 Full Surface Continuous Hinges can be used on new installations or to replace worn-out or broken hinges. They are stronger than pivots and distribute the weight of a door evenly. Aesthetically pleasing, they are made in Michigan and guaranteed for the life of the opening.
Features
- Standard Duty: up to 200 lb., medium-frequency (10 to 24 opens/closes per day)
- Fits narrow (7/8") frame face
- Tamper resistant, removable door leaf cover
- 1/16" door inset
- Standard barrel nuts accommodate 1-3/8" to 1-3/4" doors
- Long barrel nuts available for 2" to 2-1/4" doors
- All SL57 geared continuous hinges are BHMA Grade 1 certified
Finishes
Dark Bronze 710/313AN
Clear Aluminum 673/US92
Installation Challenge Level
Easy
Anyone who can read instructions and use a screwdriver can install this product.
Instructions & Templates
Select Continuous Hinges - 83" Standard Duty - Half Surface
$178.00
Mounts on door face and frame rabbet.
Select Products SL54 Half Surface Continuous Hinges can be used on new installations or to replace worn-out or broken hinges. They are stronger than pivots and distribute the weight of a door evenly. Aesthetically pleasing, they are made in Michigan and guaranteed for the life of the opening.
Features
- Standard Duty: up to 200 lb., medium-frequency (10 to 24 opens/closes per day)
- Frame leaf covers butt hinge preps
- Tamper-resistant, removable door leaf cover
- 3/32" door inset
- For 1-3/4" doors
- Long barrel nuts available for 2" to 2-1/4" doors
- SL54 HD geared continuous hinges are BHMA Grade 1 certified.
Finishes
Dark Bronze 710/313AN
Clear Aluminum 673/US92
Installation Challenge Level
Easy
Anyone who can read instructions and use a screwdriver can install this product.
Instructions & Templates
Select Continuous Hinges - 95" Heavy Duty - Concealed
$169.94
Concealed mount - no mortise required.
Select Products SL24 Concealed Continuous Hinges can be used on new installations or to replace worn-out or broken hinges. They are stronger than pivots and distribute the weight of a door evenly. Aesthetically pleasing, they are made in Michigan and guaranteed for the life of the opening.
Features
- Heavy Duty:
- up to 200 lb., high-frequency (more than 25 opens/closes per day and/or abused doors - ones that often get slammed against a stop, operate in a school, etc.)
- up to 400 lb., medium-frequency (10 to 24 opens/closes per day)
- up to 600 lb., low-frequency (10 opens/closes per day or less)
- Door edge protector
- Frame leaf covers butt hinge preps
- 1/16"door inset
- For 1-3/4" doors
- All SL24 geared continuous hinges are BHMA Grade 1 certified
Finishes
Dark Bronze 710/313AN
Clear Aluminum 673/US92
Installation Challenge Level
Easy
Anyone who can read instructions and use a screwdriver can install this product.
Instructions & Templates
Select Continuous Hinges - 95" Heavy Duty - Full Surface
$229.69
Surface mount on face of existing or new door and frame.
Select Products SL57 Full Surface Continuous Hinges can be used on new installations or to replace worn-out or broken hinges. They are stronger than pivots and distribute the weight of a door evenly. Aesthetically pleasing, they are made in Michigan and guaranteed for the life of the opening.
Features
- Heavy Duty:
- up to 200 lb., high-frequency (more than 25 opens/closes per day and/or abused doors - ones that often get slammed against a stop, operate in a school, etc.)
- up to 400 lb., medium-frequency (10 to 24 opens/closes per day)
- up to 600 lb., low-frequency (10 opens/closes per day or less)
- Fits narrow (7/8") frame face
- Tamper resistant, removable door leaf cover
- 1/16" door inset
- Standard barrel nuts accommodate 1-3/8" to 1-3/4" doors
- Long barrel nuts available for 2" to 2-1/4" doors
- All SL57 geared continuous hinges are BHMA Grade 1 certified
Finishes
Dark Bronze 710/313AN
Clear Aluminum 673/US92
Installation Challenge Level
Easy
Anyone who can read instructions and use a screwdriver can install this product.
Instructions & Templates
Select Continuous Hinges - 95" Heavy Duty - Half Surface
$232.93
Mounts on door face and frame rabbet.
Select Products SL54 Half Surface Continuous Hinges can be used on new installations or to replace worn-out or broken hinges. They are stronger than pivots and distribute the weight of a door evenly. Aesthetically pleasing, they are made in Michigan and guaranteed for the life of the opening.
Features
- Heavy Duty:
- up to 200 lb., high-frequency (more than 25 opens/closes per day and/or abused doors - ones that often get slammed against a stop, operate in a school, etc.)
- up to 400 lb., medium-frequency (10 to 24 opens/closes per day)
- up to 600 lb., low-frequency (10 opens/closes per day or less)
- Frame leaf covers butt hinge preps
- Tamper-resistant, removable door leaf cover
- 3/32" door inset
- For 1-3/4" doors
- Long barrel nuts available for 2" to 2-1/4" doors
- SL54 HD geared continuous hinges are BHMA Grade 1 certified.
Finishes
Dark Bronze 710/313AN
Clear Aluminum 673/US92
Installation Challenge Level
Easy
Anyone who can read instructions and use a screwdriver can install this product.
Instructions & Templates
Select Continuous Hinges - 95" Heavy Duty - Wide Throw
$316.60
Concealed hinge with wide throw for clearance of brick moldings or special door/frame designs.
Select Products SL40 Wide Throw Continuous Hinges can be used on new installations or to replace worn-out or broken hinges. They are stronger than pivots and distribute the weight of a door evenly. Aesthetically pleasing, they are made in Michigan and guaranteed for the life of the opening.
Features
- Heavy Duty:
- up to 200 lb., high-frequency (more than 25 opens/closes per day and/or abused doors - ones that often get slammed against a stop, operate in a school, etc.)
- up to 400 lb., medium-frequency (10 to 24 opens/closes per day)
- up to 600 lb., low-frequency (10 opens/closes per day or less)
- Frame leaf covers butt hinge preps
- Flush mounted (no door inset)
- For 1-3/4" doors
- SL40 HD geared continuous hinges are BHMA Grade 1 certified.
Finishes
Dark Bronze 710/313AN
Clear Aluminum 673/US92
Installation Challenge Level
Easy
Anyone who can read instructions and use a screwdriver can install this product.
Instructions & Templates
Select Continuous Hinges - 95" Standard Duty - Concealed
$171.26
Concealed mount - no mortise required.
Select Products SL24 Concealed Continuous Hinges can be used on new installations or to replace worn-out or broken hinges. They are stronger than pivots and distribute the weight of a door evenly. Aesthetically pleasing, they are made in Michigan and guaranteed for the life of the opening.
Features
- Standard Duty: up to 200 lb., medium-frequency (10 to 24 opens/closes per day)
- Door edge protector
- Frame leaf covers butt hinge preps
- 1/16"door inset
- For 1-3/4" doors
- All SL24 geared continuous hinges are BHMA Grade 1 certified
Finishes
Dark Bronze 710/313AN
Clear Aluminum 673/US92
Installation Challenge Level
Easy
Anyone who can read instructions and use a screwdriver can install this product.
Instructions & Templates
Select Continuous Hinges - 95" Standard Duty - Full Surface
$195.70
Surface mount on face of existing or new door and frame.
Select Products SL57 Full Surface Continuous Hinges can be used on new installations or to replace worn-out or broken hinges. They are stronger than pivots and distribute the weight of a door evenly. Aesthetically pleasing, they are made in Michigan and guaranteed for the life of the opening.
Features
- Standard Duty: up to 200 lb., medium-frequency (10 to 24 opens/closes per day)
- Fits narrow (7/8") frame face
- Tamper resistant, removable door leaf cover
- 1/16" door inset
- Standard barrel nuts accommodate 1-3/8" to 1-3/4" doors
- Long barrel nuts available for 2" to 2-1/4" doors
- All SL57 geared continuous hinges are BHMA Grade 1 certified
Finishes
Dark Bronze 710/313AN
Clear Aluminum 673/US92
Installation Challenge Level
Easy
Anyone who can read instructions and use a screwdriver can install this product.
Instructions & Templates
Select Continuous Hinges - 95" Standard Duty - Half Surface
$232.93
Mounts on door face and frame rabbet.
Select Products SL54 Half Surface Continuous Hinges can be used on new installations or to replace worn-out or broken hinges. They are stronger than pivots and distribute the weight of a door evenly. Aesthetically pleasing, they are made in Michigan and guaranteed for the life of the opening.
Features
- Standard Duty: up to 200 lb., medium-frequency (10 to 24 opens/closes per day)
- Frame leaf covers butt hinge preps
- Tamper-resistant, removable door leaf cover
- 3/32" door inset
- For 1-3/4" doors
- Long barrel nuts available for 2" to 2-1/4" doors
- SL54 HD geared continuous hinges are BHMA Grade 1 certified.
Finishes
Dark Bronze 710/313AN
Clear Aluminum 673/US92
Installation Challenge Level
Easy
Anyone who can read instructions and use a screwdriver can install this product.
Instructions & Templates
Simplex Mechanical Pushbutton Lock 1000 Series - Knob
$550.00
The Simplex 1000 Series provides exterior access by combination, while allowing free egress. This mechanical lock, with knob option, eliminates the material and labor expense of battery replacements, has a single access-code and is programmed via the keypad without removing the lock from the door.
Features
- Locking Device: Cylindrical latch with 3-hour UL/ULC fire rating on "A" labeled doors
- Number of Codes: Single access code—one easy-to-manage code for all users
- Programming: Lock is easily programmed via keypad without removing lock from the door
Specs
- Construction: Heavy-duty cylindrical lock housing with cast front housing; unified trim plate; cast knobs
- Numeric Keypad: Vandal resistant, solid metal pushbuttons
- Handing: Factory-handed for left-hand doors; easily field reversible
- Backset: 2¾" (70 mm), 2⅜" (60 mm)
- Latch: ½" (13 mm) throw latch, ¾"
- Minimum Stile Recommended: 5" (127 mm)
- Strike: Standard strike plate; ASA strike plate
- Schlage core
- Door Preparation: Easily installs on wood or metal doors. ASA 161 door preparation with additional through bore holes required.
- Door Thickness: 1⅜" (35 mm) to 2¼" (57 mm)—Pre-assembled to accommodate 1⅝" (41 mm) to 2" (51 mm)
- Durability: D.O.D. Compliant 5220.22M for supplemental access control; weather resistant
- Fire Rating: 3-hour UL/ULC fire rating for "A" labeled doors
- Warranty: 3-year warranty
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging
Recommended for Experienced Installers, but not rocket science.
Instructions & Templates
Simplex Mechanical Pushbutton Lock L1000 Series - Lever
$462.00
The Simplex L1000 Series provides exterior access by combination, while allowing free egress. This mechanical lock, with lever option, eliminates the material and labor expense of battery replacements, has a single access-code and is programmed via the keypad without removing the lock from the door.
Features
- Locking Device: Cylindrical latch with 3-hour UL/ULC fire rating on "A" labeled doors
- Number of Codes: Single access code—one easy-to-manage code for all users
- Programming: Lock is easily programmed via keypad without removing lock from the door
- Handing: Factory-handed , handing required when ordering.
Specs
- Construction: Heavy-duty cylindrical lock housing with cast front housing; unified trim plate; cast knobs
- Numeric Keypad: Vandal resistant, solid metal pushbuttons
- Handing: Factory-handed for left-hand doors; not field reversible.
- Backset: 2¾" (70 mm), 2⅜" (60 mm)
- Latch: ½" (13 mm) throw latch, ¾"
- Minimum Stile Recommended: 5" (127 mm)
- Strike: Standard strike plate; ASA strike plate
- Key Override: Schlage core
- Door Preparation: Easily installs on wood or metal doors. ASA 161 door preparation with additional through bore holes required.
- Door Thickness: 1⅜" (35 mm) to 2¼" (57 mm)—Pre-assembled to accommodate 1⅝" (41 mm) to 2" (51 mm)
- Durability: D.O.D. Compliant 5220.22M for supplemental access control; weather resistant
- Fire Rating: 3-hour UL/ULC fire rating for "A" labeled doors
- Warranty: 3-year warranty
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging
Recommended for Experienced Installers, but not rocket science.
Instructions & Templates
Von Duprin 2670 Guard-X Alarmed Exit Device
$610.50
GUARD-X provides secure, alarmed code-compliant protection for secondary exits. GUARD-X exit alarm lock readily identifies the door on which it is mounted as an emergency exit and secures the opening against unauthorized use. It is ideal for deterring theft in restaurants and retail establishments such as: discount, grocery, drug, clothing and sporting goods stores.
Features
- Heavy-Duty Design
- Stainless steel deadbolt
- Tested to withstand up to 1600 pounds of force
- Requires key to reset after unauthorized exit
- 100-decibel alarm
- Armed indicator light
- Complies with NFPA 101® Life Safety Code
- UL Listed
- Non-handed
- Schlage SC-1 key cylinder included
Finishes
Satin Aluminum 628/US28
Installation Challenge Level
Challenging
Recommended for Experienced Installers, but not rocket science.
Instructions & Templates
Company Info
Resources
Why Buy From Us?
Huge Inventory
Huge Inventory
No Hassle Returns
Satisfaction
Guaranteed
Guaranteed
News & Updates
Sign up to get the latest on sales, new releases and more …
