Adams Rite Reinforcing Pivot
$68.00
Reinforcing Pivots provide an economical way to transfer load from hinges of sagging doors. This full-surface reinforcing pivot adds years of life to openings where the hinges or hinge reinforcements have failed. Reinforcing pivots take the load off the top hinge and transfer it to screws that are in shear so they will not pull off. The economical way to solve door sag problems.
Specs
- Door Type: Full surface reinforcing pivots for flush doors
- Finish: Zinc plating over steel
- Material: Heavy-duty 3/16” cold-rolled steel
- Cycle Testing: 1,500,000 repetitions
- Capacity: Supports weights up to 300 lbs.
- Hole Pattern: Symmetrically located. Non-handed
- Hinge Size: The B1923 pivot is designed with a 3/4” offset to match the pivot point of a 4-1/2” wide butt hinge
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
Instructions & Templates
Related Items
ABH 1000 Series Concealed Mount, Heavy Duty Overhead Holder - Friction
$164.50
Customer Reviews
The ABH 1000 Series with Friction Function – Most commonly used on doors without closers. Door will stay held open at the selected degree of opening. Friction tension adjustment screw controls the amount of resistance when opening and closing the door.
Overhead holders and stops are used to prevent unnecessary damage to the door, frame, wall and other door hardware by limiting the degree of door swing. They are installed at the top of a door opening; therefore, out of the general reach and not a tripping hazard. Whether for commercial or residential application, the use of overhead holders and stops extends the life of the opening and other hardware.
This ABH Mfg. product is similar to products from Rixson, Sargent, Dorma, Glynn Johnson, and Rockwood. See the Cross Reference Chart in the ABH Catalog (under Downloads, below) for more information.
This item normally ships out within 2 weeks.
- Concealed mount
- Heavy duty
- Stop, hold-open and friction functions available
- Single or double acting doors
- Non-handed
- For Interior or exterior use on frequent traffic and heavy weight doors
- Standard installation from 85° to 110° of opening (5° increments)
- Shock absorbing spring provides 3° to 5° cushion before dead-stop
- 1-3/4" minimum door thickness
- UL Listed as Miscellaneous Fired Door Accessories for use on wood fire doors rated up to 90 minutes and metal fire doors rated up to 3 hours (Stop Function Only)
- Base material for jamb brackets, arms and channels is stainless steel
- Average weight per unit = 6 lbs.
US32D Satin Stainless Steel
US10 Satin Bronze
US10B Dark Bronze
US26D Satin Chrome Plated
US4 Satin Brass
US26 Bright Chrome Plated
US3 Bright Brass
US32 Bright Stainless Steel
S1 Painted Aluminum
S2 Painted Brass (to match US4)
S3 Painted Bronze (to match US10)
S4 Painted Black
S5 Painted Dark Bronze (to match US10B)
S8 Painted White
CALL FOR PRICING
- All Stainless Steel Components
- For use with cam lift hinges (1/2" lift maximum)
- Hold-Closed
- Lead-lined
- Less Spring
- Non-ferrous fasteners provided In lieu of standard fasteners
- Security Fasteners (Specify Door & Frame Material)
- Threaded pivot screw & nylon washer in lieu of standard jamb bracket
- Special door thickness (see catalog for standard door thicknesses for each respective model)
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
ABH 1000 Series Concealed Mount, Heavy Duty Overhead Holder - Hold Open
$164.50
Customer Reviews
The ABH 1000 Series with Hold Open Function – Door will stay held open at the selected degree of opening. Hold open adjustment screw controls the amount of force required to disengage the hold open mechanism.
Overhead holders and stops are used to prevent unnecessary damage to the door, frame, wall and other door hardware by limiting the degree of door swing. They are installed at the top of a door opening; therefore, out of the general reach and not a tripping hazard. Whether for commercial or residential application, the use of overhead holders and stops extends the life of the opening and other hardware.
This ABH Mfg. product is similar to products from Rixson, Sargent, Dorma, Glynn Johnson, and Rockwood. See the Cross Reference Chart in the ABH Catalog (under Downloads, below) for more information.
This item normally ships out within 2 weeks.
- Concealed mount
- Heavy duty
- Stop, hold-open and friction functions available
- Single or double acting doors
- Non-handed
- For Interior or exterior use on frequent traffic and heavy weight doors
- Standard installation from 85° to 110° of opening (5° increments)
- Shock absorbing spring provides 3° to 5° cushion before dead-stop
- 1-3/4" minimum door thickness
- UL Listed as Miscellaneous Fired Door Accessories for use on wood fire doors rated up to 90 minutes and metal fire doors rated up to 3 hours (Stop Function Only)
- Base material for jamb brackets, arms and channels is stainless steel
- Average weight per unit = 6 lbs.
US32D Satin Stainless Steel
US10 Satin Bronze
US10B Dark Bronze
US26D Satin Chrome Plated
US4 Satin Brass
US26 Bright Chrome Plated
US3 Bright Brass
US32 Bright Stainless Steel
S1 Painted Aluminum
S2 Painted Brass (to match US4)
S3 Painted Bronze (to match US10)
S4 Painted Black
S5 Painted Dark Bronze (to match US10B)
S8 Painted White
CALL FOR PRICING
- All Stainless Steel Components
- For use with cam lift hinges (1/2" lift maximum)
- Hold-Closed
- Lead-lined
- Less Spring
- Non-ferrous fasteners provided In lieu of standard fasteners
- Security Fasteners (Specify Door & Frame Material)
- Threaded pivot screw & nylon washer in lieu of standard jamb bracket
- Special door thickness (see catalog for standard door thicknesses for each respective model)
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
ABH 1000 Series Concealed Mount, Heavy Duty Overhead Holder - Stop
$164.50
Customer Reviews
The ABH 1000 Series with Stop Function – Door stops at selected degree of opening.
Overhead holders and stops are used to prevent unnecessary damage to the door, frame, wall and other door hardware by limiting the degree of door swing. They are installed at the top of a door opening; therefore, out of the general reach and not a tripping hazard. Whether for commercial or residential application, the use of overhead holders and stops extends the life of the opening and other hardware.
This ABH Mfg. product is similar to products from Rixson, Sargent, Dorma, Glynn Johnson, and Rockwood. See the Cross Reference Chart in the ABH Catalog (under Downloads, below) for more information.
This item normally ships out within 2 weeks.
- Concealed mount
- Heavy duty
- Stop, hold-open and friction functions available
- Single or double acting doors
- Non-handed
- For Interior or exterior use on frequent traffic and heavy weight doors
- Standard installation from 85° to 110° of opening (5° increments)
- Shock absorbing spring provides 3° to 5° cushion before dead-stop
- 1-3/4" minimum door thickness
- UL Listed as Miscellaneous Fired Door Accessories for use on wood fire doors rated up to 90 minutes and metal fire doors rated up to 3 hours (Stop Function Only)
- Base material for jamb brackets, arms and channels is stainless steel
- Average weight per unit = 6 lbs.
US32D Satin Stainless Steel
US10 Satin Bronze
US10B Dark Bronze
US26D Satin Chrome Plated
US4 Satin Brass
US26 Bright Chrome Plated
US3 Bright Brass
US32 Bright Stainless Steel
S1 Painted Aluminum
S2 Painted Brass (to match US4)
S3 Painted Bronze (to match US10)
S4 Painted Black
S5 Painted Dark Bronze (to match US10B)
S8 Painted White
CALL FOR PRICING
- All Stainless Steel Components
- For use with cam lift hinges (1/2" lift maximum)
- Hold-Closed
- Lead-lined
- Less Spring
- Non-ferrous fasteners provided In lieu of standard fasteners
- Security Fasteners (Specify Door & Frame Material)
- Threaded pivot screw & nylon washer in lieu of standard jamb bracket
- Special door thickness (see catalog for standard door thicknesses for each respective model)
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
ABH 1000A Concealed Mount, Heavy Duty Adjustable Overhead Holder - Friction
$167.80
Customer Reviews
The ABH 1000A Series is field-adjustable after installation from 85° to 110° (5° increments).
Friction Function – Most commonly used on doors without closers. Door will stay held open at the selected degree of opening. Friction tension adjustment screw controls the amount of resistance when opening and closing the door.
Overhead holders and stops are used to prevent unnecessary damage to the door, frame, wall and other door hardware by limiting the degree of door swing. They are installed at the top of a door opening; therefore, out of the general reach and not a tripping hazard. Whether for commercial or residential application, the use of overhead holders and stops extends the life of the opening and other hardware.
This ABH Mfg. product is similar to products from Rixson, Sargent, Dorma, Glynn Johnson, and Rockwood. See the Cross Reference Chart in the ABH Catalog (under Downloads, below) for more information.
This item normally ships out within 2 weeks.
- Concealed mount
- Heavy duty
- Stop, hold-open and friction functions available
- Single or double acting doors
- Non-handed
- For Interior or exterior use on frequent traffic and heavy weight doors
- Degree of opening is field-adjustable after installation from 85° to 110° (5° increments)
- Shock absorbing spring provides 3° to 5° cushion before dead-stop
- 1-3/4" minimum door thickness
- UL Listed as Miscellaneous Fired Door Accessories for use on wood fire doors rated up to 90 minutes and metal fire doors rated up to 3 hours (Stop Function Only)
- Base material for jamb brackets, arms and channels is stainless steel
- Average weight per unit = 6 lbs.
US32D Satin Stainless Steel
US10 Satin Bronze
US10B Dark Bronze
US26D Satin Chrome Plated
US4 Satin Brass
US26 Bright Chrome Plated
US3 Bright Brass
US32 Bright Stainless Steel
S1 Painted Aluminum
S2 Painted Brass (to match US4)
S3 Painted Bronze (to match US10)
S4 Painted Black
S5 Painted Dark Bronze (to match US10B)
S8 Painted White
CALL FOR PRICING
- All Stainless Steel Components
- Hold-Closed
- Lead-lined
- Less Spring
- Non-ferrous fasteners provided In lieu of standard fasteners
- Security Fasteners (Specify Door & Frame Material)
- Contact us if the dimension, hardware or specifications differ from what is shown on the template or if additional hardware is being used at the top of the door. A custom template and/or unit may be required
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
Company Info
Resources
Why Buy From Us?
Huge Inventory
Huge Inventory
No Hassle Returns
Satisfaction
Guaranteed
Guaranteed
News & Updates
Sign up to get the latest on sales, new releases and more …
