Products
ABH 3300A Surface Mount, Medium Duty Adjustable Overhead Holder - Friction
$84.55
Customer Reviews
The ABH 3300A Series is field-adjustable after installation from 85° to 110° (5° increments).
Friction Function – Most commonly used on doors without closers. Door will stay held open at the selected degree of opening. Friction tension adjustment screw controls the amount of resistance when opening and closing the door.
Overhead holders and stops are used to prevent unnecessary damage to the door, frame, wall and other door hardware by limiting the degree of door swing. They are installed at the top of a door opening; therefore, out of the general reach and not a tripping hazard. Whether for commercial or residential application, the use of overhead holders and stops extends the life of the opening and other hardware.
This ABH Mfg. product is similar to products from Rixson, Sargent, Dorma, Glynn Johnson, and Rockwood. See the Cross Reference Chart in the ABH Catalog (under Downloads, below) for more information.
This item normally ships out within 2 weeks.
- Surface mount
- Medium duty
- Stop, hold-open and friction functions available
- Single acting doors only
- Non-handed
- For interior use on moderate traffic and medium weight doors
- Degree of opening is field adjustable from 85° to 110° (5° increments)
- Shock absorbing spring provides 3° to 5° cushion before dead-stop
- 1-3/4" minimum door thickness
- UL Listed as Miscellaneous Fired Door Accessories for use on wood fire doors rated up to 90 minutes and metal fire doors rated up to 3 hours (Stop Function Only)
- Average weight per unit = 3 lbs.
US32D Satin Stainless Steel
US10 Satin Bronze
US10B Dark Bronze
US26D Satin Chrome Plated
US4 Satin Brass
US26 Bright Chrome Plated
US3 Bright Brass
US32 Bright Stainless Steel
S1 Painted Aluminum
S2 Painted Brass (to match US4)
S3 Painted Bronze (to match US10)
S4 Painted Black
S5 Painted Dark Bronze (to match US10B)
S8 Painted White
CALL FOR PRICING
- All Stainless Steel Components
- Angle Jam Brackets
- Use with Cam Lift Hinges
- Lead-lined
- Less Spring
- Security Fasteners (Specify Door & Frame Material)
- Threaded Pivot Screw & Nylon Washer in Lieu of Jamb Bracket
- Contact us if the dimension, hardware or specifications differ from what is shown on the template or if additional hardware is being used at the top of the door. A custom template and/or unit may be required
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
ABH 3300A Surface Mount, Medium Duty Adjustable Overhead Holder - Hold Open
$84.55
Customer Reviews
The ABH 3300A Series is field-adjustable after installation from 85° to 110° (5° increments).
Hold Open Function – Door will stay held open at the selected degree of opening. Hold open adjustment screw controls the amount of force required to disengage the hold open mechanism.
Overhead holders and stops are used to prevent unnecessary damage to the door, frame, wall and other door hardware by limiting the degree of door swing. They are installed at the top of a door opening; therefore, out of the general reach and not a tripping hazard. Whether for commercial or residential application, the use of overhead holders and stops extends the life of the opening and other hardware.
This ABH Mfg. product is similar to products from Rixson, Sargent, Dorma, Glynn Johnson, and Rockwood. See the Cross Reference Chart in the ABH Catalog (under Downloads, below) for more information.
This item normally ships out within 2 weeks.
- Surface mount
- Medium duty
- Stop, hold-open and friction functions available
- Single acting doors only
- Non-handed
- For interior use on moderate traffic and medium weight doors
- Degree of opening is field adjustable from 85° to 110° (5° increments)
- Shock absorbing spring provides 3° to 5° cushion before dead-stop
- 1-3/4" minimum door thickness
- UL Listed as Miscellaneous Fired Door Accessories for use on wood fire doors rated up to 90 minutes and metal fire doors rated up to 3 hours (Stop Function Only)
- Average weight per unit = 3 lbs.
US32D Satin Stainless Steel
US10 Satin Bronze
US10B Dark Bronze
US26D Satin Chrome Plated
US4 Satin Brass
US26 Bright Chrome Plated
US3 Bright Brass
US32 Bright Stainless Steel
S1 Painted Aluminum
S2 Painted Brass (to match US4)
S3 Painted Bronze (to match US10)
S4 Painted Black
S5 Painted Dark Bronze (to match US10B)
S8 Painted White
CALL FOR PRICING
- All Stainless Steel Components
- Angle Jam Brackets
- Use with Cam Lift Hinges
- Lead-lined
- Less Spring
- Security Fasteners (Specify Door & Frame Material)
- Threaded Pivot Screw & Nylon Washer in Lieu of Jamb Bracket
- Contact us if the dimension, hardware or specifications differ from what is shown on the template or if additional hardware is being used at the top of the door. A custom template and/or unit may be required
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
ABH 3300A Surface Mount, Medium Duty Adjustable Overhead Holder - Stop
$84.55
Customer Reviews
The ABH 3300A Series is field-adjustable after installation from 85° to 110° (5° increments).
Stop Function – Door stops at selected degree of opening.
Overhead holders and stops are used to prevent unnecessary damage to the door, frame, wall and other door hardware by limiting the degree of door swing. They are installed at the top of a door opening; therefore, out of the general reach and not a tripping hazard. Whether for commercial or residential application, the use of overhead holders and stops extends the life of the opening and other hardware.
This ABH Mfg. product is similar to products from Rixson, Sargent, Dorma, Glynn Johnson, and Rockwood. See the Cross Reference Chart in the ABH Catalog (under Downloads, below) for more information.
This item normally ships out within 2 weeks.
- Surface mount
- Medium duty
- Stop, hold-open and friction functions available
- Single acting doors only
- Non-handed
- For interior use on moderate traffic and medium weight doors
- Degree of opening is field adjustable from 85° to 110° (5° increments)
- Shock absorbing spring provides 3° to 5° cushion before dead-stop
- 1-3/4" minimum door thickness
- UL Listed as Miscellaneous Fired Door Accessories for use on wood fire doors rated up to 90 minutes and metal fire doors rated up to 3 hours (Stop Function Only)
- Average weight per unit = 3 lbs.
US32D Satin Stainless Steel
US10 Satin Bronze
US10B Dark Bronze
US26D Satin Chrome Plated
US4 Satin Brass
US26 Bright Chrome Plated
US3 Bright Brass
US32 Bright Stainless Steel
S1 Painted Aluminum
S2 Painted Brass (to match US4)
S3 Painted Bronze (to match US10)
S4 Painted Black
S5 Painted Dark Bronze (to match US10B)
S8 Painted White
CALL FOR PRICING
- All Stainless Steel Components
- Angle Jam Brackets
- Use with Cam Lift Hinges
- Lead-lined
- Less Spring
- Security Fasteners (Specify Door & Frame Material)
- Threaded Pivot Screw & Nylon Washer in Lieu of Jamb Bracket
- Contact us if the dimension, hardware or specifications differ from what is shown on the template or if additional hardware is being used at the top of the door. A custom template and/or unit may be required
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
ABH 3400 Surface Mount, Medium Duty Overhead Holder - Friction
$84.55
Customer Reviews
The ABH 3400 Series with Friction Function – Most commonly used on doors without closers. Door will stay held open at the selected degree of opening. Friction tension adjustment screw controls the amount of resistance when opening and closing the door.
Overhead holders and stops are used to prevent unnecessary damage to the door, frame, wall and other door hardware by limiting the degree of door swing. They are installed at the top of a door opening; therefore, out of the general reach and not a tripping hazard. Whether for commercial or residential application, the use of overhead holders and stops extends the life of the opening and other hardware.
This ABH Mfg. product is similar to products from Rixson, Sargent, Dorma, Glynn Johnson, and Rockwood. See the Cross Reference Chart in the ABH Catalog (under Downloads, below) for more information.
This item normally ships out within 2 weeks.
- Frame Opening 24" - 36"
- Surface mount
- Medium duty
- Side jamb mount for doors that do not extend to frame header
- Ideal for dressing room and washroom stall doors with frames
- Stop, hold-open and friction functions available
- Single acting doors only
- Non-handed
- For interior use on moderate traffic and medium weight doors
- Standard installation from 90° to 100° of opening (5° increments)
- Shock absorbing spring provides 3° to 5° cushion before dead-stop
- Standard fasteners supplied with sex bolts for 1-3/4" to 1-7/8" thick door (see options for other door thickness)
- Average weight per unit = 3 lbs.
US32D Satin Stainless Steel
US10 Satin Bronze
US10B Dark Bronze
US26D Satin Chrome Plated
US4 Satin Brass
US26 Bright Chrome Plated
US3 Bright Brass
US32 Bright Stainless Steel
S1 Painted Aluminum
S2 Painted Brass (to match US4)
S3 Painted Bronze (to match US10)
S4 Painted Black
S5 Painted Dark Bronze (to match US10B)
S8 Painted White
CALL FOR PRICING
- All Stainless Steel Components
- Angle Jam Brackets
- Use with Cam Lift Hinges
- Lead-lined
- Less Spring
- Security Fasteners (Specify Door & Frame Material)
- Threaded Pivot Screw & Nylon Washer in Lieu of Jamb Bracket
- Contact us if the dimension, hardware or specifications differ from what is shown on the template or if additional hardware is being used at the top of the door. A custom template and/or unit may be required
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
ABH 3400 Surface Mount, Medium Duty Overhead Holder - Hold Open
$84.55
Customer Reviews
The ABH 3400 Series with Hold Open Function – Door will stay held open at the selected degree of opening. Hold open adjustment screw controls the amount of force required to disengage the hold open mechanism.
Overhead holders and stops are used to prevent unnecessary damage to the door, frame, wall and other door hardware by limiting the degree of door swing. They are installed at the top of a door opening; therefore, out of the general reach and not a tripping hazard. Whether for commercial or residential application, the use of overhead holders and stops extends the life of the opening and other hardware.
This ABH Mfg. product is similar to products from Rixson, Sargent, Dorma, Glynn Johnson, and Rockwood. See the Cross Reference Chart in the ABH Catalog (under Downloads, below) for more information.
This item normally ships out within 2 weeks.
- Frame Opening 24" - 36"
- Surface mount
- Medium duty
- Side jamb mount for doors that do not extend to frame header
- Ideal for dressing room and washroom stall doors with frames
- Stop, hold-open and friction functions available
- Single acting doors only
- Non-handed
- For interior use on moderate traffic and medium weight doors
- Standard installation from 90° to 100° of opening (5° increments)
- Shock absorbing spring provides 3° to 5° cushion before dead-stop
- Standard fasteners supplied with sex bolts for 1-3/4" to 1-7/8" thick door (see options for other door thickness)
- Average weight per unit = 3 lbs.
US32D Satin Stainless Steel
US10 Satin Bronze
US10B Dark Bronze
US26D Satin Chrome Plated
US4 Satin Brass
US26 Bright Chrome Plated
US3 Bright Brass
US32 Bright Stainless Steel
S1 Painted Aluminum
S2 Painted Brass (to match US4)
S3 Painted Bronze (to match US10)
S4 Painted Black
S5 Painted Dark Bronze (to match US10B)
S8 Painted White
CALL FOR PRICING
- All Stainless Steel Components
- Angle Jam Brackets
- Use with Cam Lift Hinges
- Lead-lined
- Less Spring
- Security Fasteners (Specify Door & Frame Material)
- Threaded Pivot Screw & Nylon Washer in Lieu of Jamb Bracket
- Contact us if the dimension, hardware or specifications differ from what is shown on the template or if additional hardware is being used at the top of the door. A custom template and/or unit may be required
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
ABH 3400 Surface Mount, Medium Duty Overhead Holder - Stop
$84.55
Customer Reviews
The ABH 3400 Series with Stop Function – Door stops at selected degree of opening.
Overhead holders and stops are used to prevent unnecessary damage to the door, frame, wall and other door hardware by limiting the degree of door swing. They are installed at the top of a door opening; therefore, out of the general reach and not a tripping hazard. Whether for commercial or residential application, the use of overhead holders and stops extends the life of the opening and other hardware.
This ABH Mfg. product is similar to products from Rixson, Sargent, Dorma, Glynn Johnson, and Rockwood. See the Cross Reference Chart in the ABH Catalog (under Downloads, below) for more information.
This item normally ships out within 2 weeks.
- Frame Opening 24" - 36"
- Surface mount
- Medium duty
- Side jamb mount for doors that do not extend to frame header
- Ideal for dressing room and washroom stall doors with frames
- Stop, hold-open and friction functions available
- Single acting doors only
- Non-handed
- For interior use on moderate traffic and medium weight doors
- Standard installation from 90° to 100° of opening (5° increments)
- Shock absorbing spring provides 3° to 5° cushion before dead-stop
- Standard fasteners supplied with sex bolts for 1-3/4" to 1-7/8" thick door (see options for other door thickness)
- Average weight per unit = 3 lbs.
US32D Satin Stainless Steel
US10 Satin Bronze
US10B Dark Bronze
US26D Satin Chrome Plated
US4 Satin Brass
US26 Bright Chrome Plated
US3 Bright Brass
US32 Bright Stainless Steel
S1 Painted Aluminum
S2 Painted Brass (to match US4)
S3 Painted Bronze (to match US10)
S4 Painted Black
S5 Painted Dark Bronze (to match US10B)
S8 Painted White
CALL FOR PRICING
- All Stainless Steel Components
- Angle Jam Brackets
- Use with Cam Lift Hinges
- Lead-lined
- Less Spring
- Security Fasteners (Specify Door & Frame Material)
- Threaded Pivot Screw & Nylon Washer in Lieu of Jamb Bracket
- Contact us if the dimension, hardware or specifications differ from what is shown on the template or if additional hardware is being used at the top of the door. A custom template and/or unit may be required
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
ABH 3500 Surface Mount 180˚ Parallel Arm Holder
$70.79
Customer Reviews
The ABH 3500 Series is a heavy-duty parallel arm holder for exterior, vestibule and interior single acting doors 24" to 36".
Overhead holders are used to prevent unnecessary damage to the door, frame, wall and other door hardware by limiting the degree of door swing. They are installed at the top of a door opening; therefore, out of the general reach and not a tripping hazard. Whether for commercial or residential application, the use of overhead holders stops extends the life of the opening and other hardware.
This ABH Mfg. product is similar to products from Rixson, Sargent, Dorma, Glynn Johnson, and Rockwood. See the Cross Reference Chart in the ABH Catalog (under Downloads, below) for more information.
This item normally ships out within 2 weeks.
- Surface Mount
- Heavy Duty
- Adjustable hold-open position from 135° to 180°
- Single acting doors only
- For use on the inactive leaf of a pair of doors where a door closer is installed on the active leaf
- For interior or exterior use on frequent traffic and heavy weight doors
- For door openings 24" - 36"
- Units are handed - specify when ordering
- Standard fasteners supplied for 1-3/4" to 1-7/8" thick door (see options for other door thickness)
- Average weight per unit = 4 lbs
S1 Painted Aluminum
S2 Painted Brass (to match US4)
S3 Painted Bronze (to match US10)
S4 Painted Black
S5 Painted Dark Bronze (to match US10B)
S8 Painted White
CALL FOR PRICING
- Lead-lined
- Security Fasteners (Specify Door & Frame Material)
- Sex Bolts
- Special Door Thickness
- Contact us if the dimension, hardware or specifications differ from what is shown on the template or if additional hardware is being used at the top of the door. A custom template and/or unit may be required
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
ABH 4400 Surface Mount, Medium Duty Overhead Holder - Friction
$96.86
Customer Reviews
The ABH 4400 Series with Friction Function – Most commonly used on doors without closers. Door will stay held open at the selected degree of opening. Friction tension adjustment screw controls the amount of resistance when opening and closing the door.
Overhead holders and stops are used to prevent unnecessary damage to the door, frame, wall and other door hardware by limiting the degree of door swing. They are installed at the top of a door opening; therefore, out of the general reach and not a tripping hazard. Whether for commercial or residential application, the use of overhead holders and stops extends the life of the opening and other hardware.
This ABH Mfg. product is similar to products from Rixson, Sargent, Dorma, Glynn Johnson, and Rockwood. See the Cross Reference Chart in the ABH Catalog (under Downloads, below) for more information.
This item normally ships out within 2 weeks.
- Surface Mount
- Medium Duty
- Stop, hold-open and friction functions available
- Single acting doors only
- Non-handed
- Standard installation from 85° to 110° of opening (5° increments)
- Shock absorbing spring provides 3° to 5° cushion before dead-stop
- Standard fasteners supplied with sex bolts for 1-3/4" to 1-7/8" thick door (see options for other door thickness)
- UL Listed as Miscellaneous Fire Door Accessories for use on wood fire doors rated up to 90 minutes and metal fire doors rated up to 3 hours (stop function only)
- Average weight per unit = 2 lbs.
US32D Satin Stainless Steel
US10 Satin Bronze
US10B Dark Bronze
US26D Satin Chrome Plated
US4 Satin Brass
US26 Bright Chrome Plated
US3 Bright Brass
US32 Bright Stainless Steel
S1 Painted Aluminum
S2 Painted Brass (to match US4)
S3 Painted Bronze (to match US10)
S4 Painted Black
S5 Painted Dark Bronze (to match US10B)
S8 Painted White
CALL FOR PRICING
- All Stainless Steel Components
- Angle Jam Brackets
- Hold Closed
- Use with Cam Lift Hinges
- Lead-lined
- Less Spring
- Security Fasteners (Specify Door & Frame Material)
- Threaded Pivot Screw & Nylon Washer in Lieu of Jamb Bracket
- Special Door Thickness
- Contact us if the dimension, hardware or specifications differ from what is shown on the template or if additional hardware is being used at the top of the door. A custom template and/or unit may be required
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
ABH 4400 Surface Mount, Medium Duty Overhead Holder - Hold Open
$96.86
Customer Reviews
The ABH 4400 Series with Hold Open Function – Door will stay held open at the selected degree of opening. Hold open adjustment screw controls the amount of force required to disengage the hold open mechanism.
Overhead holders and stops are used to prevent unnecessary damage to the door, frame, wall and other door hardware by limiting the degree of door swing. They are installed at the top of a door opening; therefore, out of the general reach and not a tripping hazard. Whether for commercial or residential application, the use of overhead holders and stops extends the life of the opening and other hardware.
This ABH Mfg. product is similar to products from Rixson, Sargent, Dorma, Glynn Johnson, and Rockwood. See the Cross Reference Chart in the ABH Catalog (under Downloads, below) for more information.
This item normally ships out within 2 weeks.
- Surface Mount
- Medium Duty
- Stop, hold-open and friction functions available
- Single acting doors only
- Non-handed
- Standard installation from 85° to 110° of opening (5° increments)
- Shock absorbing spring provides 3° to 5° cushion before dead-stop
- Standard fasteners supplied with sex bolts for 1-3/4" to 1-7/8" thick door (see options for other door thickness)
- UL Listed as Miscellaneous Fire Door Accessories for use on wood fire doors rated up to 90 minutes and metal fire doors rated up to 3 hours (stop function only)
- Average weight per unit = 2 lbs.
US32D Satin Stainless Steel
US10 Satin Bronze
US10B Dark Bronze
US26D Satin Chrome Plated
US4 Satin Brass
US26 Bright Chrome Plated
US3 Bright Brass
US32 Bright Stainless Steel
S1 Painted Aluminum
S2 Painted Brass (to match US4)
S3 Painted Bronze (to match US10)
S4 Painted Black
S5 Painted Dark Bronze (to match US10B)
S8 Painted White
CALL FOR PRICING
- All Stainless Steel Components
- Angle Jam Brackets
- Hold Closed
- Use with Cam Lift Hinges
- Lead-lined
- Less Spring
- Security Fasteners (Specify Door & Frame Material)
- Threaded Pivot Screw & Nylon Washer in Lieu of Jamb Bracket
- Special Door Thickness
- Contact us if the dimension, hardware or specifications differ from what is shown on the template or if additional hardware is being used at the top of the door. A custom template and/or unit may be required
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
ABH 4400 Surface Mount, Medium Duty Overhead Holder - Stop
$66.86
Customer Reviews
The ABH 4400 Series with Stop Function – Door stops at selected degree of opening.
Overhead holders and stops are used to prevent unnecessary damage to the door, frame, wall and other door hardware by limiting the degree of door swing. They are installed at the top of a door opening; therefore, out of the general reach and not a tripping hazard. Whether for commercial or residential application, the use of overhead holders and stops extends the life of the opening and other hardware.
This ABH Mfg. product is similar to products from Rixson, Sargent, Dorma, Glynn Johnson, and Rockwood. See the Cross Reference Chart in the ABH Catalog (under Downloads, below) for more information.
This item normally ships out within 2 weeks.
- Surface Mount
- Medium Duty
- Stop, hold-open and friction functions available
- Single acting doors only
- Non-handed
- Standard installation from 85° to 110° of opening (5° increments)
- Shock absorbing spring provides 3° to 5° cushion before dead-stop
- Standard fasteners supplied with sex bolts for 1-3/4" to 1-7/8" thick door (see options for other door thickness)
- UL Listed as Miscellaneous Fire Door Accessories for use on wood fire doors rated up to 90 minutes and metal fire doors rated up to 3 hours (stop function only)
- Average weight per unit = 2 lbs.
US32D Satin Stainless Steel
US10 Satin Bronze
US10B Dark Bronze
US26D Satin Chrome Plated
US4 Satin Brass
US26 Bright Chrome Plated
US3 Bright Brass
US32 Bright Stainless Steel
S1 Painted Aluminum
S2 Painted Brass (to match US4)
S3 Painted Bronze (to match US10)
S4 Painted Black
S5 Painted Dark Bronze (to match US10B)
S8 Painted White
CALL FOR PRICING
- All Stainless Steel Components
- Angle Jam Brackets
- Hold Closed
- Use with Cam Lift Hinges
- Lead-lined
- Less Spring
- Security Fasteners (Specify Door & Frame Material)
- Threaded Pivot Screw & Nylon Washer in Lieu of Jamb Bracket
- Special Door Thickness
- Contact us if the dimension, hardware or specifications differ from what is shown on the template or if additional hardware is being used at the top of the door. A custom template and/or unit may be required
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
ABH 7000 Surface Mount, Heavy Duty Overhead Holder - Hold Open
$136.99
Customer Reviews
The ABH 7000 Series with Hold Open Function – Door will stay held open at the selected degree of opening. Hold open adjustment screw controls the amount of force required to disengage the hold open mechanism.
Overhead holders and stops are used to prevent unnecessary damage to the door, frame, wall and other door hardware by limiting the degree of door swing. They are installed at the top of a door opening; therefore, out of the general reach and not a tripping hazard. Whether for commercial or residential application, the use of overhead holders and stops extends the life of the opening and other hardware.
This ABH Mfg. product is similar to products from Rixson, Sargent, Dorma, Glynn Johnson, and Rockwood. See the Cross Reference Chart in the ABH Catalog (under Downloads, below) for more information.
This item normally ships out within 2 weeks.
- Surface Mount
- Heavy Duty
- Stop, hold-open and friction functions available
- Single acting doors only
- Non-handed
- For interior or exterior use on frequent traffic and heavy weight doors
- Standard installation from 85° to 110° of opening (5° increments)
- Shock absorbing spring provides 3° to 5° cushion before dead-stop
- Standard fasteners supplied with sex bolts for 1-3/4" to 1-7/8" thick door (see options for other door thickness)
- UL Listed as Miscellaneous Fire Door Accessories for use on wood fire doors rated up to 90 minutes and metal fire doors rated up to 3 hours (stop function only)
- Average weight per unit = 3 lbs.
US32D Satin Stainless Steel
US10 Satin Bronze
US10B Dark Bronze
US26D Satin Chrome Plated
US4 Satin Brass
US26 Bright Chrome Plated
US3 Bright Brass
US32 Bright Stainless Steel
S1 Painted Aluminum
S2 Painted Brass (to match US4)
S3 Painted Bronze (to match US10)
S4 Painted Black
S5 Painted Dark Bronze (to match US10B)
S8 Painted White
CALL FOR PRICING
- All Stainless Steel Components
- Angle Jam Brackets
- Lead-lined
- Security Fasteners (Specify Door & Frame Material)
- Special Door Thickness
- Contact us if the dimension, hardware or specifications differ from what is shown on the template or if additional hardware is being used at the top of the door. A custom template and/or unit may be required
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
ABH 7000 Surface Mount, Heavy Duty Overhead Holder - Stop
$136.99
Customer Reviews
The ABH 7000 Series with Stop Function – Door stops at selected degree of opening.
Overhead holders and stops are used to prevent unnecessary damage to the door, frame, wall and other door hardware by limiting the degree of door swing. They are installed at the top of a door opening; therefore, out of the general reach and not a tripping hazard. Whether for commercial or residential application, the use of overhead holders and stops extends the life of the opening and other hardware.
This ABH Mfg. product is similar to products from Rixson, Sargent, Dorma, Glynn Johnson, and Rockwood. See the Cross Reference Chart in the ABH Catalog (under Downloads, below) for more information.
This item normally ships out within 2 weeks.
- Surface Mount
- Heavy Duty
- Stop, hold-open and friction functions available
- Single acting doors only
- Non-handed
- For interior or exterior use on frequent traffic and heavy weight doors
- Standard installation from 85° to 110° of opening (5° increments)
- Shock absorbing spring provides 3° to 5° cushion before dead-stop
- Standard fasteners supplied with sex bolts for 1-3/4" to 1-7/8" thick door (see options for other door thickness)
- UL Listed as Miscellaneous Fire Door Accessories for use on wood fire doors rated up to 90 minutes and metal fire doors rated up to 3 hours (stop function only)
- Average weight per unit = 3 lbs.
US32D Satin Stainless Steel
US10 Satin Bronze
US10B Dark Bronze
US26D Satin Chrome Plated
US4 Satin Brass
US26 Bright Chrome Plated
US3 Bright Brass
US32 Bright Stainless Steel
S1 Painted Aluminum
S2 Painted Brass (to match US4)
S3 Painted Bronze (to match US10)
S4 Painted Black
S5 Painted Dark Bronze (to match US10B)
S8 Painted White
CALL FOR PRICING
- All Stainless Steel Components
- Angle Jam Brackets
- Lead-lined
- Security Fasteners (Specify Door & Frame Material)
- Special Door Thickness
- Contact us if the dimension, hardware or specifications differ from what is shown on the template or if additional hardware is being used at the top of the door. A custom template and/or unit may be required
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
ABH 8000 Surface Mount, Extra Heavy Duty Overhead Holder - Hold Open
$152.07
Customer Reviews
The ABH 8000 Series with Hold Open Function – Door will stay held open at the selected degree of opening. Hold open adjustment screw controls the amount of force required to disengage the hold open mechanism.
Overhead holders and stops are used to prevent unnecessary damage to the door, frame, wall and other door hardware by limiting the degree of door swing. They are installed at the top of a door opening; therefore, out of the general reach and not a tripping hazard. Whether for commercial or residential application, the use of overhead holders and stops extends the life of the opening and other hardware.
This ABH Mfg. product is similar to products from Rixson, Sargent, Dorma, Glynn Johnson, and Rockwood. See the Cross Reference Chart in the ABH Catalog (under Downloads, below) for more information.
This item normally ships out within 2 weeks.
- Surface Mount
- Extra Heavy Duty - used in correctional institutions and bank vault door applications
- NY SCA approved
- Stop, hold-open and friction functions available
- Single acting doors only
- Non-handed
- For interior or exterior use on frequent traffic and heavy weight doors
- Standard installation from 85° to 110° of opening (5° increments)
- Shock absorbing spring provides 3° to 5° cushion before dead-stop
- Standard fasteners supplied with sex bolts for 1-3/4" to 1-7/8" thick door (see options for other door thickness)
- UL Listed as Miscellaneous Fire Door Accessories for use on wood fire doors rated up to 90 minutes and metal fire doors rated up to 3 hours (stop function only)
- Average weight per unit = 5 lbs.
US32D Satin Stainless Steel
US10 Satin Bronze
US10B Dark Bronze
US26D Satin Chrome Plated
US4 Satin Brass
US26 Bright Chrome Plated
US3 Bright Brass
US32 Bright Stainless Steel
S1 Painted Aluminum
S2 Painted Brass (to match US4)
S3 Painted Bronze (to match US10)
S4 Painted Black
S5 Painted Dark Bronze (to match US10B)
S8 Painted White
CALL FOR PRICING
- All Stainless Steel Components
- Lead-lined
- Security Fasteners (Specify Door & Frame Material)
- Special Door Thickness
- Contact us if the dimension, hardware or specifications differ from what is shown on the template or if additional hardware is being used at the top of the door. A custom template and/or unit may be required
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
ABH 8000 Surface Mount, Extra Heavy Duty Overhead Holder - Stop
$135.02
Customer Reviews
The ABH 8000 Series with Stop Function – Door stops at selected degree of opening.
Overhead holders and stops are used to prevent unnecessary damage to the door, frame, wall and other door hardware by limiting the degree of door swing. They are installed at the top of a door opening; therefore, out of the general reach and not a tripping hazard. Whether for commercial or residential application, the use of overhead holders and stops extends the life of the opening and other hardware.
This ABH Mfg. product is similar to products from Rixson, Sargent, Dorma, Glynn Johnson, and Rockwood. See the Cross Reference Chart in the ABH Catalog (under Downloads, below) for more information.
This item normally ships out within 2 weeks.
- Surface Mount
- Extra Heavy Duty - used in correctional institutions and bank vault door applications
- NY SCA approved
- Stop, hold-open and friction functions available
- Single acting doors only
- Non-handed
- For interior or exterior use on frequent traffic and heavy weight doors
- Standard installation from 85° to 110° of opening (5° increments)
- Shock absorbing spring provides 3° to 5° cushion before dead-stop
- Standard fasteners supplied with sex bolts for 1-3/4" to 1-7/8" thick door (see options for other door thickness)
- UL Listed as Miscellaneous Fire Door Accessories for use on wood fire doors rated up to 90 minutes and metal fire doors rated up to 3 hours (stop function only)
- Average weight per unit = 5 lbs.
US32D Satin Stainless Steel
US10 Satin Bronze
US10B Dark Bronze
US26D Satin Chrome Plated
US4 Satin Brass
US26 Bright Chrome Plated
US3 Bright Brass
US32 Bright Stainless Steel
S1 Painted Aluminum
S2 Painted Brass (to match US4)
S3 Painted Bronze (to match US10)
S4 Painted Black
S5 Painted Dark Bronze (to match US10B)
S8 Painted White
CALL FOR PRICING
- All Stainless Steel Components
- Lead-lined
- Security Fasteners (Specify Door & Frame Material)
- Special Door Thickness
- Contact us if the dimension, hardware or specifications differ from what is shown on the template or if additional hardware is being used at the top of the door. A custom template and/or unit may be required
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
ABH 9000 Surface Mount, Heavy Duty Overhead Holder - Friction
$146.82
Customer Reviews
The ABH 9000 Series with Friction Function – Most commonly used on doors without closers. Door will stay held open at the selected degree of opening. Friction tension adjustment screw controls the amount of resistance when opening and closing the door.
Overhead holders and stops are used to prevent unnecessary damage to the door, frame, wall and other door hardware by limiting the degree of door swing. They are installed at the top of a door opening; therefore, out of the general reach and not a tripping hazard. Whether for commercial or residential application, the use of overhead holders and stops extends the life of the opening and other hardware.
This ABH Mfg. product is similar to products from Rixson, Sargent, Dorma, Glynn Johnson, and Rockwood. See the Cross Reference Chart in the ABH Catalog (under Downloads, below) for more information.
This item normally ships out within 2 weeks.
- Surface Mount
- Heavy Duty
- Stop, hold-open and friction functions available
- Single acting doors only
- Non-handed
- For interior or exterior use on frequent traffic and heavy weight doors
- Standard installation from 85° to 110° of opening (5° increments)
- Shock absorbing spring provides 3° to 5° cushion before dead-stop
- Standard fasteners supplied with sex bolts for 1-3/4" to 2-1/4" thick door (see options for other door thickness)
- UL Listed as Miscellaneous Fire Door Accessories for use on wood fire doors rated up to 90 minutes and metal fire doors rated up to 3 hours (stop function only)
- Average weight per unit = 5 lbs.
US32D Satin Stainless Steel
US10 Satin Bronze
US10B Dark Bronze
US26D Satin Chrome Plated
US4 Satin Brass
US26 Bright Chrome Plated
US3 Bright Brass
US32 Bright Stainless Steel
S1 Painted Aluminum
S2 Painted Brass (to match US4)
S4 Painted Black
S8 Painted White
CALL FOR PRICING
- All Stainless Steel Components
- Angle Jam Brackets
- For Use with Cam Lift Hinges
- Hold Closed
- Lead-lined
- Less Spring
- Security Fasteners (Specify Door & Frame Material)
- Threaded Pivot Screw & Nylon Washer in Lieu of Jamb Bracket
- Special Door Thickness
- Contact us if the dimension, hardware or specifications differ from what is shown on the template or if additional hardware is being used at the top of the door. A custom template and/or unit may be required
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
ABH 9000 Surface Mount, Heavy Duty Overhead Holder - Hold Open
$146.82
Customer Reviews
The ABH 9000 Series with Hold Open Function – Door will stay held open at the selected degree of opening. Hold open adjustment screw controls the amount of force required to disengage the hold open mechanism.
Overhead holders and stops are used to prevent unnecessary damage to the door, frame, wall and other door hardware by limiting the degree of door swing. They are installed at the top of a door opening; therefore, out of the general reach and not a tripping hazard. Whether for commercial or residential application, the use of overhead holders and stops extends the life of the opening and other hardware.
This ABH Mfg. product is similar to products from Rixson, Sargent, Dorma, Glynn Johnson, and Rockwood. See the Cross Reference Chart in the ABH Catalog (under Downloads, below) for more information.
This item normally ships out within 2 weeks.
- Surface Mount
- Heavy Duty
- Stop, hold-open and friction functions available
- Single acting doors only
- Non-handed
- For interior or exterior use on frequent traffic and heavy weight doors
- Standard installation from 85° to 110° of opening (5° increments)
- Shock absorbing spring provides 3° to 5° cushion before dead-stop
- Standard fasteners supplied with sex bolts for 1-3/4" to 2-1/4" thick door (see options for other door thickness)
- UL Listed as Miscellaneous Fire Door Accessories for use on wood fire doors rated up to 90 minutes and metal fire doors rated up to 3 hours (stop function only)
- Average weight per unit = 5 lbs.
US32D Satin Stainless Steel
US10 Satin Bronze
US10B Dark Bronze
US26D Satin Chrome Plated
US4 Satin Brass
US26 Bright Chrome Plated
US3 Bright Brass
US32 Bright Stainless Steel
S1 Painted Aluminum
S2 Painted Brass (to match US4)
S4 Painted Black
S8 Painted White
CALL FOR PRICING
- All Stainless Steel Components
- Angle Jam Brackets
- For Use with Cam Lift Hinges
- Hold Closed
- Lead-lined
- Less Spring
- Security Fasteners (Specify Door & Frame Material)
- Threaded Pivot Screw & Nylon Washer in Lieu of Jamb Bracket
- Special Door Thickness
- Contact us if the dimension, hardware or specifications differ from what is shown on the template or if additional hardware is being used at the top of the door. A custom template and/or unit may be required
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
ABH 9000 Surface Mount, Heavy Duty Overhead Holder - Stop
$146.82
Customer Reviews
The ABH 9000 Series with Stop Function – Door stops at selected degree of opening.
Overhead holders and stops are used to prevent unnecessary damage to the door, frame, wall and other door hardware by limiting the degree of door swing. They are installed at the top of a door opening; therefore, out of the general reach and not a tripping hazard. Whether for commercial or residential application, the use of overhead holders and stops extends the life of the opening and other hardware.
This ABH Mfg. product is similar to products from Rixson, Sargent, Dorma, Glynn Johnson, and Rockwood. See the Cross Reference Chart in the ABH Catalog (under Downloads, below) for more information.
This item normally ships out within 2 weeks.
- Surface Mount
- Heavy Duty
- Stop, hold-open and friction functions available
- Single acting doors only
- Non-handed
- For interior or exterior use on frequent traffic and heavy weight doors
- Standard installation from 85° to 110° of opening (5° increments)
- Shock absorbing spring provides 3° to 5° cushion before dead-stop
- Standard fasteners supplied with sex bolts for 1-3/4" to 2-1/4" thick door (see options for other door thickness)
- UL Listed as Miscellaneous Fire Door Accessories for use on wood fire doors rated up to 90 minutes and metal fire doors rated up to 3 hours (stop function only)
- Average weight per unit = 5 lbs.
US32D Satin Stainless Steel
US10 Satin Bronze
US10B Dark Bronze
US26D Satin Chrome Plated
US4 Satin Brass
US26 Bright Chrome Plated
US3 Bright Brass
US32 Bright Stainless Steel
S1 Painted Aluminum
S2 Painted Brass (to match US4)
S4 Painted Black
S8 Painted White
CALL FOR PRICING
- All Stainless Steel Components
- Angle Jam Brackets
- For Use with Cam Lift Hinges
- Hold Closed
- Lead-lined
- Less Spring
- Security Fasteners (Specify Door & Frame Material)
- Threaded Pivot Screw & Nylon Washer in Lieu of Jamb Bracket
- Special Door Thickness
- Contact us if the dimension, hardware or specifications differ from what is shown on the template or if additional hardware is being used at the top of the door. A custom template and/or unit may be required
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
ABH 9000A Surface Mount, Heavy Duty Adjustable Overhead Holder - Friction
$183.53
Customer Reviews
The ABH 9000A Series is field-adjustable after installation from 85° to 110° (5° increments).
Friction Function – Most commonly used on doors without closers. Door will stay held open at the selected degree of opening. Friction tension adjustment screw controls the amount of resistance when opening and closing the door.
Overhead holders and stops are used to prevent unnecessary damage to the door, frame, wall and other door hardware by limiting the degree of door swing. They are installed at the top of a door opening; therefore, out of the general reach and not a tripping hazard. Whether for commercial or residential application, the use of overhead holders and stops extends the life of the opening and other hardware.
This ABH Mfg. product is similar to products from Rixson, Sargent, Dorma, Glynn Johnson, and Rockwood. See the Cross Reference Chart in the ABH Catalog (under Downloads, below) for more information.
This item normally ships out within 2 weeks.
- Surface mount
- Heavy duty
- Stop, hold-open and friction functions available
- Single acting doors only
- Non-handed
- For interior or exterior use on frequent traffic and heavy weight doors
- Degree of opening is field adjustable from 85° to 110° (5° increments)
- Shock absorbing spring provides 3° to 5° cushion before dead-stop
- Standard fasteners supplied with sex bolts for 1-3/4" to 2-1/4" thick door (see options for other door thickness)
- UL Listed as Miscellaneous Fired Door Accessories for use on wood fire doors rated up to 90 minutes and metal fire doors rated up to 3 hours (Stop Function Only)
- Average weight per unit = 6 lbs.
US32D Satin Stainless Steel
US10 Satin Bronze
US10B Dark Bronze
US26D Satin Chrome Plated
US4 Satin Brass
US26 Bright Chrome Plated
US3 Bright Brass
US32 Bright Stainless Steel
S1 Painted Aluminum
S2 Painted Brass (to match US4)
S3 Painted Bronze (to match US10)
S4 Painted Black
S5 Painted Dark Bronze (to match US10B)
S8 Painted White
CALL FOR PRICING
- All Stainless Steel Components
- Angle Jam Brackets
- Use with Cam Lift Hinges
- Hold Closed
- Lead-lined
- Less Spring
- Security Fasteners (Specify Door & Frame Material)
- Threaded Pivot Screw & Nylon Washer in Lieu of Jamb Bracket
- Special Door Thickness
- Contact us if the dimension, hardware or specifications differ from what is shown on the template or if additional hardware is being used at the top of the door. A custom template and/or unit may be required
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
ABH 9000A Surface Mount, Heavy Duty Adjustable Overhead Holder - Hold Open
$183.53
Customer Reviews
The ABH 9000A Series is field-adjustable after installation from 85° to 110° (5° increments).
Hold Open Function – Door will stay held open at the selected degree of opening. Hold open adjustment screw controls the amount of force required to disengage the hold open mechanism.
Overhead holders and stops are used to prevent unnecessary damage to the door, frame, wall and other door hardware by limiting the degree of door swing. They are installed at the top of a door opening; therefore, out of the general reach and not a tripping hazard. Whether for commercial or residential application, the use of overhead holders and stops extends the life of the opening and other hardware.
This ABH Mfg. product is similar to products from Rixson, Sargent, Dorma, Glynn Johnson, and Rockwood. See the Cross Reference Chart in the ABH Catalog (under Downloads, below) for more information.
This item normally ships out within 2 weeks.
- Surface mount
- Heavy duty
- Stop, hold-open and friction functions available
- Single acting doors only
- Non-handed
- For interior or exterior use on frequent traffic and heavy weight doors
- Degree of opening is field adjustable from 85° to 110° (5° increments)
- Shock absorbing spring provides 3° to 5° cushion before dead-stop
- Standard fasteners supplied with sex bolts for 1-3/4" to 2-1/4" thick door (see options for other door thickness)
- UL Listed as Miscellaneous Fired Door Accessories for use on wood fire doors rated up to 90 minutes and metal fire doors rated up to 3 hours (Stop Function Only)
- Average weight per unit = 6 lbs.
US32D Satin Stainless Steel
US10 Satin Bronze
US10B Dark Bronze
US26D Satin Chrome Plated
US4 Satin Brass
US26 Bright Chrome Plated
US3 Bright Brass
US32 Bright Stainless Steel
S1 Painted Aluminum
S2 Painted Brass (to match US4)
S3 Painted Bronze (to match US10)
S4 Painted Black
S5 Painted Dark Bronze (to match US10B)
S8 Painted White
CALL FOR PRICING
- All Stainless Steel Components
- Angle Jam Brackets
- Use with Cam Lift Hinges
- Hold Closed
- Lead-lined
- Less Spring
- Security Fasteners (Specify Door & Frame Material)
- Threaded Pivot Screw & Nylon Washer in Lieu of Jamb Bracket
- Special Door Thickness
- Contact us if the dimension, hardware or specifications differ from what is shown on the template or if additional hardware is being used at the top of the door. A custom template and/or unit may be required
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
ABH 9000A Surface Mount, Heavy Duty Adjustable Overhead Holder - Stop
$183.53
Customer Reviews
The ABH 9000A Series is field-adjustable after installation from 85° to 110° (5° increments).
Stop Function – Door stops at selected degree of opening.
Overhead holders and stops are used to prevent unnecessary damage to the door, frame, wall and other door hardware by limiting the degree of door swing. They are installed at the top of a door opening; therefore, out of the general reach and not a tripping hazard. Whether for commercial or residential application, the use of overhead holders and stops extends the life of the opening and other hardware.
This ABH Mfg. product is similar to products from Rixson, Sargent, Dorma, Glynn Johnson, and Rockwood. See the Cross Reference Chart in the ABH Catalog (under Downloads, below) for more information.
This item normally ships out within 2 weeks.
- Surface mount
- Heavy duty
- Stop, hold-open and friction functions available
- Single acting doors only
- Non-handed
- For interior or exterior use on frequent traffic and heavy weight doors
- Degree of opening is field adjustable from 85° to 110° (5° increments)
- Shock absorbing spring provides 3° to 5° cushion before dead-stop
- Standard fasteners supplied with sex bolts for 1-3/4" to 2-1/4" thick door (see options for other door thickness)
- UL Listed as Miscellaneous Fired Door Accessories for use on wood fire doors rated up to 90 minutes and metal fire doors rated up to 3 hours (Stop Function Only)
- Average weight per unit = 6 lbs.
US32D Satin Stainless Steel
US10 Satin Bronze
US10B Dark Bronze
US26D Satin Chrome Plated
US4 Satin Brass
US26 Bright Chrome Plated
US3 Bright Brass
US32 Bright Stainless Steel
S1 Painted Aluminum
S2 Painted Brass (to match US4)
S3 Painted Bronze (to match US10)
S4 Painted Black
S5 Painted Dark Bronze (to match US10B)
S8 Painted White
CALL FOR PRICING
- All Stainless Steel Components
- Angle Jam Brackets
- Use with Cam Lift Hinges
- Hold Closed
- Lead-lined
- Less Spring
- Security Fasteners (Specify Door & Frame Material)
- Threaded Pivot Screw & Nylon Washer in Lieu of Jamb Bracket
- Special Door Thickness
- Contact us if the dimension, hardware or specifications differ from what is shown on the template or if additional hardware is being used at the top of the door. A custom template and/or unit may be required
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
ABH HD7000 Surface Mount, Extra Heavy Duty Overhead Holder - Hold Open
$268.74
Customer Reviews
The ABH HD7000 Series with Hold Open Function – Door will stay held open at the selected degree of opening. Hold open adjustment screw controls the amount of force required to disengage the hold open mechanism.
Overhead holders and stops are used to prevent unnecessary damage to the door, frame, wall and other door hardware by limiting the degree of door swing. They are installed at the top of a door opening; therefore, out of the general reach and not a tripping hazard. Whether for commercial or residential application, the use of overhead holders and stops extends the life of the opening and other hardware.
This ABH Mfg. product is similar to products from Rixson, Sargent, Dorma, Glynn Johnson, and Rockwood. See the Cross Reference Chart in the ABH Catalog (under Downloads, below) for more information.
This item normally ships out within 2 weeks.
- Surface Mount
- Extra Heavy Duty - used in correctional institutions and bank vault door applications
- Stop, hold-open and friction functions available
- Single acting doors only
- Non-handed
- For interior or exterior use on frequent traffic and heavy weight doors
- Standard installation from 85° to 110° of opening (5° increments)
- Shock absorbing spring provides 3° to 5° cushion before dead-stop
- Standard fasteners supplied with sex bolts for 1-3/4" to 1-7/8" thick door (see options for other door thickness)
- UL Listed as Miscellaneous Fire Door Accessories for use on wood fire doors rated up to 90 minutes and metal fire doors rated up to 3 hours (stop function only)
- Average weight per unit = 10 lbs.
US32D Satin Stainless Steel
US10 Satin Bronze
US10B Dark Bronze
US26D Satin Chrome Plated
US4 Satin Brass
US26 Bright Chrome Plated
US3 Bright Brass
US32 Bright Stainless Steel
S1 Painted Aluminum
S2 Painted Brass (to match US4)
S3 Painted Bronze (to match US10)
S4 Painted Black
S5 Painted Dark Bronze (to match US10B)
S8 Painted White
CALL FOR PRICING
- All Stainless Steel Components
- Lead-lined
- Security Fasteners (Specify Door & Frame Material)
- Special Door Thickness
- Contact us if the dimension, hardware or specifications differ from what is shown on the template or if additional hardware is being used at the top of the door. A custom template and/or unit may be required
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
ABH HD7000 Surface Mount, Extra Heavy Duty Overhead Holder - Stop
$268.74
Customer Reviews
The ABH HD7000 Series with Stop Function – Door stops at selected degree of opening.
Overhead holders and stops are used to prevent unnecessary damage to the door, frame, wall and other door hardware by limiting the degree of door swing. They are installed at the top of a door opening; therefore, out of the general reach and not a tripping hazard. Whether for commercial or residential application, the use of overhead holders and stops extends the life of the opening and other hardware.
This ABH Mfg. product is similar to products from Rixson, Sargent, Dorma, Glynn Johnson, and Rockwood. See the Cross Reference Chart in the ABH Catalog (under Downloads, below) for more information.
This item normally ships out within 2 weeks.
- Surface Mount
- Extra Heavy Duty - used in correctional institutions and bank vault door applications
- Stop, hold-open and friction functions available
- Single acting doors only
- Non-handed
- For interior or exterior use on frequent traffic and heavy weight doors
- Standard installation from 85° to 110° of opening (5° increments)
- Shock absorbing spring provides 3° to 5° cushion before dead-stop
- Standard fasteners supplied with sex bolts for 1-3/4" to 1-7/8" thick door (see options for other door thickness)
- UL Listed as Miscellaneous Fire Door Accessories for use on wood fire doors rated up to 90 minutes and metal fire doors rated up to 3 hours (stop function only)
- Average weight per unit = 10 lbs.
US32D Satin Stainless Steel
US10 Satin Bronze
US10B Dark Bronze
US26D Satin Chrome Plated
US4 Satin Brass
US26 Bright Chrome Plated
US3 Bright Brass
US32 Bright Stainless Steel
S1 Painted Aluminum
S2 Painted Brass (to match US4)
S3 Painted Bronze (to match US10)
S4 Painted Black
S5 Painted Dark Bronze (to match US10B)
S8 Painted White
CALL FOR PRICING
- All Stainless Steel Components
- Lead-lined
- Security Fasteners (Specify Door & Frame Material)
- Special Door Thickness
- Contact us if the dimension, hardware or specifications differ from what is shown on the template or if additional hardware is being used at the top of the door. A custom template and/or unit may be required
Installation Challenge Level
Challenging
Recommended for Experienced Installers.
Cal-Royal BDH30 — Surface Strap-Wheel Barn Door Hardware (Wood), 6′6″ or 8′0″
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
Cal-Royal BDH30 is a barn door hardware kit for wood doors with a surface-mount strap wheel design. Order by rail length: 6′ 6″ (BDH3066) or 8′ 0″ (BDH3080). Optional Soft-Close variants use prefix SCSBDH (e.g., SCSBDH3066). Standard finish: BLACK; some distributors also offer US15 Satin Nickel.
Lead time: Typically distributor-stocked; confirm current availability.
Cal-Royal BDH30 — Surface Strap-Wheel Barn Door Hardware (Wood)
- VendorCal-Royal Products, Inc.
- SeriesBDH — Barn Door Hardware (Wood)
- ModelBDH30 — Surface mount, Strap Wheel
- Rail Lengths6′ 6″ (BDH3066) • 8′ 0″ (BDH3080)
- Soft-Close VariantsSCSBDH3066 • SCSBDH3080
- Less-Track SetBDH30LT (no track, hardware only)
- FinishBLACK (std) • US15 Satin Nickel (selected distributors)
- Max Door WeightUp to 132 lb with Soft-Close; higher without soft-close (per distributor data)
- Set IncludesTrack, 2 rollers, 2 stops, floor guide, anti-jump discs, screws (kit); LT = hardware less track
- BLACK (powder-coated matte)
- US15 — Satin Nickel (availability varies)
If US15 is not stocked by your distributor, treat as special order.
| Mount / Design | Surface mount • Strap Wheel |
| Door Type | Wood interior doors |
| Lengths | 6′ 6″ • 8′ 0″ |
| Max Door Weight | 132 lb with Soft-Close (SCS) per spec; distributors list up to ~220–265 lb without SCS |
| Set Contents | 1 track (except LT), 2 rollers, 2 stops, 1 floor guide, 2 anti-jump discs, mounting screws |
Use case: Decorative barn/sliding wood doors where a strap-wheel aesthetic and stainless/black look are desired.
Reference videos; follow Cal-Royal PDFs for exact steps.
Installation Difficulty
Level 2 — Skilled DIY: Accurate rail layout & plumb/level; anchors required.
Cal-Royal BDH32 — Surface-Mount Arrowhead Barn Door Hardware (Wood), 6′6″ or 8′0″
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
Cal-Royal BDH32 is a barn door hardware kit for wood doors with a surface-mount Arrowhead roller. Order by rail length: 6′ 6″ (BDH3266) or 8′ 0″ (BDH3280). Optional Soft-Close variants: SCSBDH3266 / SCSBDH3280. Standard finish: BLACK.
Lead time: Typically distributor-stocked; confirm current availability.
Cal-Royal BDH32 — Surface-Mount Arrowhead Barn Door Hardware (Wood)
-
VendorCal-Royal Products, Inc.
-
SeriesBDH — Barn Door Hardware (Wood)
-
ModelBDH32 — Surface mount, Arrowhead
-
Rail Lengths6′ 6″ (BDH3266) • 8′ 0″ (BDH3280)
-
Soft-Close VariantsSCSBDH3266 • SCSBDH3280 (132 lb max door w/ SCS)
-
FinishBLACK (standard)
-
Max Door WeightUp to 220 lb (no SCS); 132 lb with SCS
-
Set IncludesTrack, 2 rollers, 2 stops, floor guide, anti-jump discs, mounting screws
| Mount / Design | Surface mount • Arrowhead roller |
| Door Type | Wood interior doors |
| Lengths | 6′ 6″ • 8′ 0″ |
| Max Door Weight | Up to 220 lb (no SCS); 132 lb with SCS |
| Set Contents | 1 track, 2 rollers, 2 stops, 1 floor guide, 2 anti-jump discs, screws |
Installation Difficulty
Level 2 — Skilled DIY: Accurate rail layout & plumb/level; anchors required.
Cal-Royal BDH34 — Surface-Mount Horseshoe Barn Door Hardware (Wood), 6′6″ or 8′0″
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
Cal-Royal BDH34 is a barn door hardware kit for wood doors with a surface-mount Horseshoe roller design. Order by rail length: 6′ 6″ (BDH3466) or 8′ 0″ (BDH3480). Optional Soft-Close variants: SCSBDH3466 / SCSBDH3480. A Less-Track kit is available as BDH34LT. Standard finish: BLACK.
Lead time: Typically distributor-stocked; confirm current availability.
Cal-Royal BDH34 — Surface-Mount Horseshoe Barn Door Hardware (Wood)
-
VendorCal-Royal Products, Inc.
-
SeriesBDH — Barn Door Hardware (Wood)
-
ModelBDH34 — Surface mount, Horseshoe design
-
Rail Lengths6′ 6″ (BDH3466) • 8′ 0″ (BDH3480)
-
Soft-Close VariantsSCSBDH3466 • SCSBDH3480
-
Less-Track SetBDH34LT (hardware kit less sliding track)
-
FinishBLACK (standard)
-
Max Door WeightUp to 220 lb (no SCS); 132 lb with SCS
-
Set IncludesTrack (except LT), 2 rollers, 2 stops, floor guide, 2 anti-jump discs, mounting screws
| Mount / Design | Surface mount • Horseshoe roller |
| Door Type | Wood interior doors |
| Lengths | 6′ 6″ • 8′ 0″ |
| Max Door Weight | Up to 220 lb (no SCS); 132 lb with SCS |
| Set Contents | 1 track (except LT), 2 rollers, 2 stops, 1 floor guide, 2 anti-jump discs, screws |
Installation Difficulty
Level 2 — Skilled DIY: Accurate rail layout & plumb/level; proper anchors required.
Cal-Royal SDH20/SDH30 — Surface Strap Single-Wheel Sliding Door Hardware (Glass/Wood)
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
Cal-Royal SDH20 / SDH30 is stainless sliding door hardware with a surface-mount strap single-wheel design. Order by Door Type (Glass = SDH20, Wood = SDH30) and Rail Length (66 = 6′ 6″, 82 = 8′ 2″). Sets include sliding rod (track), two rollers, floor guide, and mounting screws in US32D Satin Stainless Steel.
Lead time: Typically stocked by distributors; contact us for current availability.
Cal-Royal SDH20 / SDH30 — Surface Strap Single-Wheel Sliding Hardware (Regular Stop)
-
VendorCal-Royal Products
-
SeriesSDH — Stainless Sliding Door Hardware
-
ModelsSDH20 (Glass) • SDH30 (Wood)
-
Mount / DesignSurface-Mount • Strap Single-Wheel • Regular Stop
-
FinishUS32D Satin Stainless Steel
-
Max Door Weight200 lb (90 kg)
-
Door Thickness (Wood)1-3/8″ to 1-3/4″
-
Door Thickness (Glass)5/16″ to 1/2″
-
Rail Lengths6′ 6″ (suffix 66) • 8′ 2″ (suffix 82)
-
Set IncludesSliding rod (track), 2 rollers, 1 floor guide, mounting screws
- Door Type (variant): Glass (SDH20) • Wood (SDH30)
- Rail Length (variant): 6′ 6″ (66) • 8′ 2″ (82)
- Soft-Stop (accessory variants): SDH23 (Glass) • SDH33 (Wood)
- Soft-Close (kits): SCS prefixed sets (see SCS tables)
- Accessories: SDH floor guides, spacers, pulls/handles
| Models | SDH20 (Glass) • SDH30 (Wood) |
| Mount / Design | Surface mount • Strap single-wheel • Regular stop |
| Finish | US32D Satin Stainless Steel (304) |
| Door Thickness | Wood: 1-3/8″–1-3/4″ • Glass: 5/16″–1/2″ |
| Max Weight | 200 lb (90 kg) |
| Rails | 6′ 6″ or 8′ 2″ (order by suffix 66 / 82) |
| Included | Track, 2 rollers, floor guide, mounting screws |
Use case: Interior sliding doors where a clean strap aesthetic is desired in stainless finish; supports both wood and tempered glass panels.
Reference videos; follow Cal-Royal PDFs for exact steps.
Installation Difficulty
Level 2 — Skilled DIY: Careful layout; ensure plumb/level track and correct standoff for wood/glass.
Company Info
Resources
Why Buy From Us?
Huge Inventory
Huge Inventory
No Hassle Returns
Satisfaction
Guaranteed
Guaranteed
News & Updates
Sign up to get the latest on sales, new releases and more …
