Door Trim & Accessories
Commercial Door Keyed Removable Mullions, Push Plates, Pull Handles, Pull Bars, Push Bars, Pull Handles, Kickplates, Corner Guards, Latch Guards, Door Stops, Door Holds, Manual Flushbolts, and Door Viewers from PDQ. Our products meet the requirements of the Buy American Act.
Don-Jo 87 — Protection Bar, 3-1/4″ × 8-3/4″, 7-ga Stainless, 630
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
Don-Jo 87 is a stainless-steel hardware protection bar that shields levers/exit devices from carts and gurneys. Made from 7-ga (.188) stainless, screw-mounted, finish 630 / US32D Satin Stainless. Typical size: 3-1/4″ × 8-3/4″. :contentReference[oaicite:0]{index=0}
Lead time: Generally stocked in 630 Satin Stainless.
Don-Jo 87 — Protection Bar (Lever / Exit Device Guard)
- VendorDon-Jo Manufacturing
- Model87 — Protection Bar
- Material / GaugeStainless steel, 7-ga (.188)
- MountingScrew mount (surface)
- UseDeflects carts away from levers/exit devices; wall or door mount
- Nominal Size3-1/4″ W × 8-3/4″ H
Gauge/finish/mount per Don-Jo product page; size corroborated from multiple distributors. :contentReference[oaicite:1]{index=1}
- 630 / US32D — Satin Stainless (published finish)
Manufacturer lists 630 as the finish for 87. :contentReference[oaicite:2]{index=2}
| Model | 87 — Protection Bar |
| Material | Stainless steel |
| Gauge / Thickness | 7-ga (.188) |
| Finish | 630 / US32D Satin Stainless |
| Mounting | Screw mount (surface) |
| Nominal Size | 3-1/4″ × 8-3/4″ |
| Projection (ref.) | ≈2″–3-1/4″ noted across reseller listings (verify for your application) |
Spec basis: Don-Jo page; size/pricing pages show 3-1/4″ × 8-3/4″; projection varies by listing. :contentReference[oaicite:3]{index=3}
Direct from Don-Jo. :contentReference[oaicite:4]{index=4}
Manufacturer does not publish an 87-specific video; above clips show comparable guard/protector use-cases. :contentReference[oaicite:5]{index=5}
Installation Difficulty
Level 1 — Simple: Basic drill/bolt-through install.
Don-Jo CLP106 — Commercial Latch Protector (Outswing), 2-1/8″ × 6″, 12-ga Stainless, 630
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
Don-Jo CLP106 is a commercial latch protector for outswing doors, sized 2-1/8″ × 6″, made from 12-ga (.104) stainless steel with concealed welded studs and fasteners. Works with levers and exit devices; ideal for key-in-knob/lever preps. Standard finish: 630 / US32D Satin Stainless. :contentReference[oaicite:0]{index=0}
Lead time: Generally stocked in 630; verify before quoting.
Don-Jo CLP106 — Commercial Latch Protector (Outswing)
- VendorDon-Jo Manufacturing
- ModelCLP106 (Commercial latch protector)
- Door SwingOutswing
- Size2-1/8″ W × 6″ H
- Material / GaugeStainless steel, 12-ga (.104)
- IncludesConcealed welded studs with fasteners
Specs per Don-Jo product page & spec sheet. :contentReference[oaicite:1]{index=1}
- 630 / US32D — Satin Stainless (CLP-106-630)
CLP106 is a stainless model; 630 is the published finish. Treat other colors as special-order only if factory confirms. :contentReference[oaicite:2]{index=2}
| Application | Works with levers & exit devices; covers strike area |
| Door Swing | Outswing |
| Dimensions | 2-1/8″ × 6″ |
| Gauge | 12-ga (.104) |
| Mounting | Concealed welded studs; supplied fasteners |
Installation Difficulty
Level 1 — Simple: Drill/bolt-through install.
Don-Jo ELP-208 — Electric-Strike Latch Protector (Outswing), 3-1/2″ × 8″, 12-ga Steel
Sold Out
Please contact us by email or phone for pricing on this item.
Don-Jo ELP-208 is a steel latch protector for electric strikes on outswing doors. 12-ga (.104) steel, 3-1/2″ × 8″, furnished with carriage bolts, washers & acorn cap nuts. Variants include ELP-208P (no cylinder hole) and LELP-208 (cut to clear lever rose). Optional EBF fastener version. Finishes: SL Silver, DU Dark Bronze, 622 Black. Specs/finishes per Don-Jo pages & PDF. :contentReference[oaicite:0]{index=0}
Lead time: Generally stocked; confirm finish/variant availability.
Don-Jo ELP-208 — Electric-Strike Latch Protector (Outswing)
- VendorDon-Jo Manufacturing
- ModelsELP-208 (std) • ELP-208P (blank) • LELP-208 (lever cut)
- FastenersStandard bolts • EBF fasteners option
- Door SwingOutswing
- Material / GaugeSteel, 12-ga (.104)
- Size3-1/2″ × 8″
- FinishSL Silver • DU Dark Bronze • 622 Black
- UseDesigned to fit most electric strikes; completely encases keeper; use with mortise, keyless & exit devices
Refs: ELP-208, LELP-208, ELP-208P pages; EBF variants & finishes in catalog. :contentReference[oaicite:1]{index=1}
| Models | ELP-208 (with cylinder hole) • ELP-208P (no cylinder hole) • LELP-208 (clearance for up to ~3-3/4″ lever rose) :contentReference[oaicite:2]{index=2} |
| Fastener option | EBF (factory “EBF fasteners” versions) :contentReference[oaicite:3]{index=3} |
| Dimensions | 3-1/2″ × 8″ • 12-ga (.104) steel :contentReference[oaicite:4]{index=4} |
| Door swing | Outswing :contentReference[oaicite:5]{index=5} |
| Finishes | SL (Silver), DU (Duro/Dark Bronze), 622 (Black) :contentReference[oaicite:6]{index=6} |
Installation Difficulty
Level 1 — Simple: Drill/bolt-through install.
Don-Jo LP-107 — Latch Protector (Outswing), 2-3/4″ × 7″, 12-ga Stainless, 630
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
Don-Jo LP-107 is a latch protector for outswing doors, sized 2-3/4″ × 7″, made from 12-ga (.104) stainless steel. Furnished with carriage bolts, washers & acorn cap nuts. Also offered with EBF fasteners as model LP-107-EBF. Works with key-in-knob/lever preps and exit devices. :contentReference[oaicite:0]{index=0}
Lead time: Generally stocked in 630 Satin Stainless; confirm before quoting.
Don-Jo LP-107 — Latch Protector (Outswing)
- VendorDon-Jo Manufacturing
- ModelLP-107 (std) • LP-107-EBF (EBF fasteners)
- Door SwingOutswing
- Size2-3/4″ W × 7″ H
- Material / GaugeStainless steel, 12-ga (.104)
- IncludesCarriage bolts, washers, acorn cap nuts
Specs per Don-Jo LP-107 & LP-107-EBF pages and spec sheet. :contentReference[oaicite:1]{index=1}
- 630 / US32D — Satin Stainless (LP-107-630, LP-107-EBF-630)
LP-107 series publishes 630 Satin Stainless as the finish. :contentReference[oaicite:2]{index=2}
| Application | Protects latch/strike on outswing doors; works with levers & exit devices |
| Dimensions | 2-3/4″ × 7″ |
| Gauge | 12-ga (.104) |
| Fasteners | Standard carriage bolts set (std) • EBF fasteners (LP-107-EBF) |
| Material | Stainless steel |
Refs: Don-Jo pages & spec PDF. :contentReference[oaicite:3]{index=3}
Installation Difficulty
Level 1 — Simple: Drill/bolt-through install.
DON-JO ULP111 — Universal Latch Protector (Out-Swing, 12-ga Stainless, 11.75″ × 3.5″)
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
Don-Jo ULP111 is a universal latch protector for out-swing doors. Works with lever locks, mortise locks, and exit devices. Made from 12 ga (.104) stainless steel, size 11.75″ × 3.5″, furnished with carriage bolts, washers, and acorn cap nuts for strength.
Lead time: Typically stocked in 630 (US32D).
Don-Jo ULP111 — Specs & Details
- VendorDon-Jo Manufacturing, Inc.
- ModelULP111 — Universal Latch Protector
- Door SwingOut-swing
- Works WithLever locks • Mortise locks • Exit devices
- Material / GaugeStainless steel • 12 ga (.104″)
- Dimensions11.75″ L × 3.5″ W • Cutout ~8.75″
- Includes2 sets carriage bolts, washers & acorn cap nuts
Specs per Don-Jo ULP-111 page & latch protector sheet.
- 630 (US32D) — Satin Stainless (standard for ULP111)
Other colors are offered on related models (e.g., ULP211: BP/CP/DU/SL/626/622) — special order, call.
| Model | ULP111 (Universal Latch Protector) |
| Door Swing | Out-swing |
| Material | Stainless steel |
| Gauge / Thickness | 12 ga • 0.104″ |
| Size | 11.75″ length × 3.5″ width |
| Finish | 630 (US32D) Satin Stainless |
| Compatibility | Lever, mortise, and exit devices |
| Hardware Included | Carriage bolts, washers, acorn cap nuts (2 sets) |
Installation Difficulty
Level 2 — Easy: Basic layout & drilling; through-bolt hardware included.
Don-Jo ULP211 — Universal Latch Protector (Outswing), 11.75″ × 3-1/2″, 12-ga Steel
CALL FOR PRICING
Please contact us by email or phone for pricing on this item.
Don-Jo ULP211 is a universal latch protector for outswing doors. 12-ga (.104) steel, 11.75″ × 3-1/2″, furnished with carriage bolts, washers & acorn cap nuts. Works with lever locks, mortise locks, and exit devices. Finishes commonly stocked: 626 Satin Chrome, SL Silver, DU Dark Bronze, BP Brass.
Lead time: Generally stocked; confirm finish availability.
Don-Jo ULP211 — Universal Latch Protector (Outswing)
- VendorDon-Jo Manufacturing
- ModelULP211 (Universal Latch Protector)
- Door SwingOutswing
- Gauge / Material12-ga (.104) steel
- Size11.75″ L × 3-1/2″ W
- IncludesCarriage bolts, washers, acorn cap nuts
Specs/finishes per Don-Jo ULP 211 product page and latch protector sheet. :contentReference[oaicite:0]{index=0}
- 626 — Satin Chrome (ULP-211-626)
- SL — Silver Coated (ULP-211-SL)
- DU — Duro / Dark Bronze (ULP-211-DU)
- BP — Brass Plated (ULP-211-BP)
Special-order/limited: 622 — Black (listed on current site) and/or CP — Chrome Plated (older literature). Verify before listing as variants. :contentReference[oaicite:1]{index=1}
| Application | Lever locks, mortise locks, exit devices |
| Door Swing | Outswing |
| Cutout (ref) | Approx. 8.75″ (per Don-Jo sheet) |
| Shelf Pack | 10 |
Installation Difficulty
Level 1 — Simple: Drill/bolt-through install.
PDQ Angled Wall Stop
$24.00
The PDQ 115 Angled Wall Stop is cast from solid brass and features a strong rubber bumper. This Angled Wall Stop is available in a Satin Chrome Finish.
Features
- Sloped design reduces damage due to abuse
Specs
- MATERIAL: Solid cast brass with rubber bumper
- COMPLIANCES: ANSI/BHMA A156.16, TYPE L02051
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
PDQ Door Holder with Stop
$32.00
The PDQ Door Holder with Stop is mounted either vertically to the floor or horizontally to baseboard or wall. This Door Holder stops help prevent damage to walls when opening a door. Stops and Holders are mounted overhead and also protect the abuse of the hardware such as closers and hinges from wear and tear.
Specs
- MATERIAL: Cast brass
- COMPLIANCES: ANSI/BHMA A156.16, TYPE L01291
Finish
Satin chrome plated 702-US26D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
PDQ Door Stop-Spring Base
$10.00
This broad base Spring Door Stop is designed to install on a wall, door or baseboard to prevent wall or door damage. The large rubber tip of PDQ 112 Spring Base door Stops helps soften contact with wall or door to prevent damage. The flexible construction allows stop to flex when vacuuming and then snap back to original shape. Broad base provides a wider surface to support spring.
Minimum Order Quantity: 20 pieces.
Specs
- MATERIAL: Spring steel
- COMPLIANCES: ANSI/BHMA A156.16, TYPE L02051
Finishes
Satin Nickel Plated 619/US515
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
PDQ Door Viewer
$10.00
This PDQ Door Viewer allows a user to identify visitors from the security of a locked door. Viewer adjusts to fit doors from 1-3/8" To 2" thick. Offers 160 Degrees Lens Angle for Wide Viewing. Includes 4 Precision Ground Glass Lenses, Carded. It is constructed from solid brass and comes plated in satin nickel.
Minimum Order Quantity: 5 pieces.
Features
- Privacy cover, 160 degrees viewing area
Specs
- MATERIAL: Brass
- COMPLIANCES, LISTINGS: Complies with ANSI/BHMA A156.16, TYPE 03222. UL/CUL Listed for use with Certified Swinging-Type Fire Doors rated up to and including 1-1/2 hrs
Finishes
Polished Chrome Plated 625/US26
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
PDQ Hinge Stop
$8.00
The PDQ 245 Hinge Stops helps prevent damage to walls when opening a door. The rubber bumper tip of hinge stops for doors protects the door from getting damaged. Spring design allows flexibility with door and is easy to install.
Minimum Order Quantity: 10 pieces.
Features
- Positive slip proof adjustment
- Heavy wrought steel construction works with both 1⁄4” and 5⁄16” hinge pins
Specs
- MATERIAL: Wrought steel with rubber bumpers
- COMPLIANCES: ANSI/BHMA A156.16, TYPE L02223
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
PDQ Kick Down
$15.00
The PDQ Kick-Down Door Stop flips down easily to hold a door open. This Door Stop does not interfere with door operation while in raised position and is easy to install.
Minimum Order Quantity: 5 pieces.
Features
- Bumper provides reliable grip on floor
Specs
- MATERIAL: Cast steel
- COMPLIANCES: ANSI/BHMA A156.16, TYPE L01382
- Kick Down - 5” ANSI Type L01382
Finishes
Aluminum Painted 689/SP28
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
PDQ Kick Plate
$85.00
Provides protection for the bottom of the door from scuffing due to foot traffic or cleaning maintenance. Recommended for all doors especially when using a door closer.
Specs
- MATERIAL: Stainless Steel, Brass, Aluminum
- THICKNESS: 0.050"
- MOUNTING FASTENERS: • #6 x 5/8 OH PH SMS
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
PDQ Manual Flushbolt for Metal Door
$25.00
Flush bolts are used to secure an inactive door on a pair of double doors. PDQ 93170 series flush bolts are manual flush bolts for hollow metal doors. We have brass flush bolts, and steel flush bolts. PDQ 93170 flush bolts for hollow metal doors. Also please note that we also carry door coordinators if needed. We carry different types of flush bolt hardware for various installations.
Features
- Compatible with ANSI/BHMA 156.115 door and frame prep
- 3/4" slide bolt throw, 3⁄4" backset.
- 12" rod length (center of face to bolt end - retracted).
- 1-1⁄ 2" adjustable slide bolt.
- PDQ # 909 Dust Proof Strike recommended to prevent dirt from accumulating and clogging the bottom strike (ordered separately)
Specs
- BASE MATERIAL: Brass and steel
- FASTENERS: 16 ea. #8 x 3⁄4" FH combo screws
- FACE PLATE: 1" x 6-3⁄4"
- STRIKE: 15⁄16" x 2-1/4"
- GUIDE: 1" x 2"
- CERTIFICATIONS, LISTINGS, COMPLIANCES: Meets requirements of Buy American Act
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Challenging
Recommended for Experienced Installers
Instructions & Templates
PDQ Offset Pull Handle
$66.12
The PDQ 9E Series Offset Pull Handle is neat and stylish in appearance. This pull Handle is suited to many different door applications in commercial and residential environments.
Specs
- SIZE: 10"
- PROJECTION: .3-1/4"
- OVERALL LENGTH: 11"
- CLEARANCE: 2-1/4"
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
INSTRUCTIONS & TEMPLATES
PDQ Offset Pull Handle & Push Bar Set
$292.56
The Offset Pull Handle and Push Bar are neat and stylish in appearance. Both are suited to many different door applications in commercial and residential environments.
The set includes the Offset Pull Handle and Push Bar.
Specs
- Offset Pull Handle 1" round 10" CTC
- Push Bar 1" round 33" CTC
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
INSTRUCTIONS & TEMPLATES
PDQ Pull Handle
$30.10
The PDQ 3 Series Round Straight Pull Door handle features an arched D shape, 2 mounting holes, 9" overall length. This compact sized, light weight, Round Straight Door Pull handle is suitable for office buildings, department stores, and supermarkets.
Specs
- SIZE: 8"
- PROJECTION: 3"
- OVERALL LENGTH: 9"
- CLEARANCE: 2"
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
INSTRUCTIONS & TEMPLATES
PDQ Push Plate
$25.00
Door push plates protect the wood of a door which closes automatically, usually on swinging doors or doors with a pull handle on one side. These PDQ 96 Series are faithfully recreated from classic designs and available in a variety of finishes to match your home's decor.
Minimum Order Quantity: 5 pieces.
Specs
- Mounting Fasteners: #6 x 5/8 OH PH SMS
- Material: Brass, Stainless Steel
- Size: 4"x16" / Thickness: 0.050"
- Standard Cutout for Cylinder: 1-1/4” DIA
- Standard Cutout for Thumbturn: 3/8" DIA
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
PDQ Universal Dome Stop
$11.00
This floor mounted Dome Door Stop helps keep doors from hitting walls. A fashionable yet functional addition to a room's decor.This PDQ Dome Stops eliminates the need to determine requirement for traditional low or high dome stop - one stop for all applications.
Minimum Order Quantity: 5 pieces.
Features
- For doors with thresholds or undercut doors
Specs
- MATERIAL: Solid cast brass with bumper
- COMPLIANCES: ANSI/BHMA A156.16, TYPES L02141 (for plastic anchor), L20161 (for lead anchor)
Finishes
Satin Chrome 626/US26D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
PDQ Wall Stop-Concave Bumper
$6.30
The PDQ 102 Concave wall stop is ideal for residential and commercial applications. Protects walls from damage that can occur from door locks.
Minimum Order Quantity: 10 pieces.
Features
- Concealed Mounting
- Concave Bumper
- Backplate prevents damage to wall
Specs
- MATERIAL: Wrought brass, bronze, and stainless steel with bumper
- COMPLIANCES: ANSI/BHMA A156.16, TYPE L02251
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
PDQ Wall Stop-Convex Bumper
$6.30
The PDQ Convex wall stop bumper is ideal for residential and commercial applications. Protects walls from damage that can occur from door locks.
Minimum Order Quantity: 10 pieces.
Features
- Concealed Mounting
- Convex Bumper
- Backplate prevents damage to wall
Specs
- MATERIAL: Wrought brass, bronze, and stainless steel with bumper
- COMPLIANCES: ANSI/BHMA A156.16, TYPE L02251
Finishes
Satin Stainless Steel 630/US32D
Installation Challenge Level
Easy
Anyone who can read instructions and use basic tools can install this product.
Company Info
Resources
Why Buy From Us?
Huge Inventory
Huge Inventory
No Hassle Returns
Satisfaction
Guaranteed
Guaranteed
News & Updates
Sign up to get the latest on sales, new releases and more …
